Humic Acid Effects on Reducing Corn Leaf Burn Caused by Foliar Spray of Urea-Ammonium Nitrate at Different Humic Acid/Urea-Ammonium Nitrate Ratios

Technologies for reducing corn leaf burn caused by foliar spray of urea-ammonium nitrate (UAN) during the early growing season are limited. A field experiment was carried out to evaluate the effects of humic acid on corn leaf burn caused by foliar spray of undiluted UAN solution on corn canopy at Jackson, TN in 2018. Thirteen treatments of the mixtures of UAN and humic acid were evaluated at V6 of corn with different UAN application rates and different UAN/humic acid ratios. Leaf burn during 1 2, 3, 4, 5, 6, 7, and 14 days after UAN foliar spray significantly differed between with or without humic acid addition. The addition of humic acid to UAN significantly reduced leaf burn at each UAN application rate (15, 25, and 35 gal/acre). The reduction of leaf burn was enhanced as the humic acid/UAN ratio went up from 10% to 30%. Leaf burn due to foliar application of UAN became severer with higher UAN rates. The linear regression of leaf burn 14 days after application with humic acid/UAN ratio was highly significant and negative. However, the linear regression of leaf burn 14 days after application with the UAN application rate was highly significant and positive. In conclusion, adding humic acid to foliar-applied UAN is beneficial for reducing corn leaf burn during the early growing season.

Investigation on the deposition rate and the dilution ratio of plasma surface welding

A new kind of plasma technology with both high deposition rate and low dilution ratio was developed under the calculation and analysis of the arc flame characteristics of plasma arc,the kinematics behavior of powder and powder's heating in the arc. Compared with normal plasma surfacing method, the idea using constricting nozzle with small orifice diameter, long plasma arc and increasing the distance from meeting point of the two beams of powder to workpiece, to achieve the goals of high deposition rate and low dilution ratio, was put forward here. In order to prove this idea, a set of experimental system was built up and obtained satisfied results including high deposition rate(more than 25 kg/h )and low dilution ratio(less than 5%). The success of this study offers a promising prospect for developing the powder plasma surface welding in China and may open a way to improve this technology further in efficiency and quality.

Effects of soil nitrate:ammonium ratio on plant carbon:nitrogen ratio and growth rate of Artemisia sphaerocephala seedlings

Can soil nitrate： ammonium ratios influence plant carbon： nitrogen ratios of the early succession plant？ Can plant carbon： nitrogen ratios limit the plant growth in early succession？ To address these two questions, we performed a two-factor （soil nitrate： ammonium ratio and plant density） randomized block design and a uniform-precision rotatable central composite design pot experiments to examine the relationships between soil nitrate： ammonium ratios, the carbon： nitrogen ratios and growth rate of Artemisia sphaerocephala seedlings. Under adequate nutrient status, both soil nitrate： ammonium ratios and plant density influenced the carbon： nitrogen ratios and growth rate of A. sphaerocephala seedlings. Under the lower soil nitrate： ammonium ratios, with the increase of soil nitrate： ammonium ratios, the growth rates of plant height and shoot biomass of A. sphaerocephala seedlings decreased significantly; with the increase of plant carbon： nitrogen ratios, the growth rates of shoot biomass of A. sphaerocephala seedlings decreased significantly. Soil nitrate： ammonium ratios affected the carbon： nitrogen ratios of A. sphaerocephala seedlings by plant nitrogen but not by plant carbon. Thus, soil nitrate： ammonium ratios influenced the carbon： nitrogen ratios of A. sphaerocephala seedlings, and hence influenced its growth rates. Our results suggest that under adequate nutrient environment, soil nitrate： ammonium ratios can be a limiting factor for the growth of the early succession plant.

Effects of soil nitrogen:phosphorus ratio on growth rate of Artemisia ordosica seedlings

To address how the ratios of nitrogen and phosphorus (N:P ratios) in soil affect plant growth, we performed a two-factor (soil available N:P ratios and plant density) randomized block pot experiment to examine the relationships between soil N:P ratios, and the N:P ratios and growth rate of Artemisia ordosica seedlings. Under moderate water stress and adequate nutrient status, both soil N:P and plant density influenced the N:P ratios and growth rates of A. ordosica. With the increase of soil N:P ratios, the growth rates of A. ordosica seedlings decreased significantly. With the increase of soil N:P ratios, N:P ratios in A. ordosica seedlings increased significantly. While the nitrogen concentrations in the plant increased slightly, the phosphorus concentrations significantly decreased. With the increase of plant density, the shoot N:P ratios and growth rates significantly decreased, which resulted from soil N:P ratios. Thus, soil N:P ratios influenced the N:P ratios in A. ordosica seedlings, and hence, influenced its growth. Our results suggest that, under adequate nutrient environment, soil N:P ratios can be a limiting factor for plant growth.

Predictive Value of Blood Pressure,Heart Rate,and Blood Pressure/Heart Rate Ratio in a Chinese Subpopulation with Vasovagal Syncope

Objective:The head-up tilt test(HUTT)is widely used but is time-consuming and not cost-effective to evaluate patients with vasovagal syncope(VVS).The present study aims to verify the hypothesis that ambulatory blood pressure(BP)monitoring(ABPM)and the simplistic tilt test may be potential alternatives to the HUTT.Methods:The study consecutively enrolled 360 patients who underwent the HUTT to evaluate VVS.BP),heart rate(HR),and BP/HR ratios derived from ABPM and the simplistic tilt test were evaluated to predict the presence,pattern,and stage of syncope during the HUTT.Results:Mixed response was the commonest pattern,and syncope occurred frequently with infusion of isoproterenol at a rate of 3μg/min.During the simplistic tilt test,the cardioinhibitory group had higher tilted BP/HR ratios than the vasodepressor group,while the vasodepressor group had a faster tilted HR and a larger HR difference than the cardioinhibitory group.The higher the BP/HR ratio in the tilted position,the higher the isoproterenol dosage needed to induce a positive response.During ABPM,BP/HR ratios were signifi cantly higher in the cardioinhibitory group than in the vasodepressor group.The higher the ABPM-derived BP,the higher the dosage of isoproterenol needed to induce syncope.There were signifi cant correlations in BP/HR ratios between ABPM and the supine position in the vasodepressor group,while signifi cant correlation was found only for the diastolic BP/HR ratio between ABPM and the tilted position in the cardioinhibitory group.The mixed pattern shared correlative features of the other two patterns.Conclusion:ABPM and the simplistic tilt test might be used as promising alternatives to the HUTT in VVS evaluation in clinical settings.

Correlation of crack growth rate and stress ratio for fatigue damage containing very high cycle fatigue regime

A model is proposed to correlate the crack growth rate and stress ratio containing very high cycle fatigue regime.The model is verified by the experimental data in literature.Then a formula is derived for the effect of mean stress on fatigue strength,and it is used to estimate the fatigue strength of a bearing steel in very high cycle fatigue regime at different stress ratios.The estimated results are also compared with those by Goodman formula.

Comparison of the S-, N- or P-Deprivations’ Impacts on Stomatal Conductance, Transpiration and Photosynthetic Rate of Young Maize Leaves

Seven-day-old maize (Zea mays) plants were grown hydroponically for ten days in deprived nutrient solutions against the corresponding control grown under full nutrition;the effects of S-, N- or P-deprivation on laminas’ mean stomatal conductance (gs), transpiration rate (E) and photosynthetic rate (A) were monitored, along with the impact on the laminas’ total dry mass (DM), water amount (W), length and surface area (Sa). Furthermore, a time series analysis of each parameter’s response ratios (Rr), i.e. the treatment’s value divided by the corresponding control’s one, was performed. Under S-deprivation, the Rr of laminas’ mean gs, E, and A presented oscillations within a ±15% fluctuation zone, notably the “control” zone, whilst those of laminas’ total DM, water amount, surface area, and length included oscillation during the first days and deviation later on, presenting deviation during d10. Under the N-deprivation conditions all Rr time courses except the A one, included early deviations from the control zone without recovering. The deviation from the control zone appeared at d4. Under P-deprivation, all Rr time courses represented oscillations within the control zone. P-deprivation’s patterns resembled those of S-deprivation. Compared to the one of the S-deprivation, the P-one’s oscillations took place within a broader zone. Linear relationships among the various Rr patterns were found between gs-E, gs-A, E-A, DM-W and DM-Sa. In conclusion, the impact of P-deprivation appeared in an early stage and included an alleviation action, the one of N-deprivation appeared early with no alleviation action, whilst that of S-deprivation appeared later, being rather weaker when compared to the impact of the P-deprivation’s impact.

Global Analysis of an SEIR Epidemic Model with a Ratio-Dependent Nonlinear Incidence Rate

In this paper, a SEIR model with ratio-dependent transmission rate in the form ?is studied and the basic reproduction number which determines the disease’s extinction or continued existence is obtained. By constructing the proper Lyapunov function, we prove that if R0 ≤ 1, the disease-free equilibrium point of the model is globally asymptotically stable and the disease always dies out;if R0 > 1, the endemic equilibrium point is globally asymptotically stable and the disease persists.

Experimental research on the mixed sand ratio and initial dry density of weathered sand improved expansive soil free load swelling rate

In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations among free load swelling rate, non-load time, the proportion of mixed sand and initial dry density. Experimen- tal studies have shown that： Free load swelling deformation is mainly divided into three stages of rapid expan- sion, slow expansion and final stability; when the initial dry density is constant, free load swelling rate of the weathered sand modified soil will reduce rapidly before they slow down with the increase of sand proportion, and weathered sand modified soil free load swelling rate is not sensitive to the large amount of sand mixed; in the same mixed sand ratio, weathered sand modified soil free load swelling rate increases rapidly with the in- crease of initial dry density, there is a good linear correlation between them. To take appropriate control of the initial dry density during the expansive soil subgrade construction helps to reduce its swelling deformation and ensures the stability of the embankment.

Distribution Profiles and Interrelations of Stomatal Conductance, Transpiration Rate and Water Dynamics in Young Maize Laminas under Nitrogen Deprivation

Seven-day-old maize (Zea mays) plants were grown hydroponically for ten days in N-deprived nutrient solution. The distribution profiles according to the position on the stem of the –N laminas stomatal conductance, transpiration rate, photosynthetic rate (1st-group) were monitored, along with the corresponding profiles of dry mass, water amount, water content, length, surface area, and specific surface area (2nd-group), relative to control. In the uppermost –N laminas, the changes within a parameter of the 1st-group were significantly higher and of the 2nd-group significantly lower than the control, respectively. Correlations of the corresponding values among the parameters of the 1st-or 2nd-group were linear. The parameters between groups correlated non-linearly. Transpiration rate was divided by the lamina’s dry mass correlated with surface area in a power-type function. The slopes of the response ratios linear relations between the various pairs of parameters could be used for simulation of a lamina’s response to the deprivation.

Effects of N Application Rates and NO_3-N to NH_4-N Ratios on Yield and Quality of Flue-cured Tobacco Planted in Black Soil

A field experiment about effects of nitrogen application rates and different NO3-N to NH4-N ratios on agronomic, chemical and biological characteristics as well as yield and quality of flue-cured tobacco grown in a black soil was conducted from 2004 to 2005 in Heilongjiang Province. The results showed that the nitrogen application rates at 45 kg·hm^-2 with the ratio of 75% NO3-N to 25% NH4-N resulted in the highest potassium and reducing sugar contents in the flue-cured tobacco leaving with the highest quality grade and value. It is recommended that this ni- trogen application rate and NO3-N to NH4-N ratio should be widely applied on flue-cured tobacco grown in the black soil in Heilongjiang Province.

煤氧化产物生成速率与Graham′s Ratio关联性研究

对混合粒径的煤样通入4组不同进气氧浓度的氮氧混合气体,利用自主研发的油浴式煤低温氧化试验系统进行试验。通过检测煤样罐出口气体浓度,计算标准耗氧速率、标准CO生成速率及标准CO_2生成速率,研究标准CO_2生成速率与格雷哈姆系数的变化规律以及两者之间的关系。

Significance of the preoperative neutrophil-to-lymphocyte ratio in the prognosis of patients with gastric cancer

AIM: To investigate the significance of the preoperative neutrophil-to-lymphocyte ratio(NLR) in the prognosis of patients with gastric cancer(GC). METHODS: The clinical data of 291 GC patients were analysed retrospectively; these patients were divided into two groups according to their preoperative NLR: a high-NLR group(NLR ≥ 3.5, 131 cases) and a low-NLR group(NLR < 3.5, 160 cases). The clinicopathological characteristics and five-year survival rates of the two groups were compared. The NLR and other clinicopathological factors were subjected to univariate and multivariate survival analysis to evaluate the effects of the NLR on the prognosis of GC patients. RESULTS: The lowest preoperative NLR among the 291 patients was 0.56, whereas the highest preoperative NLR was 74.5. The mean preoperative NLR was 5.99 ± 8.98. Age, tumour size, T staging, tumour-node-metastasis(TNM) staging and platelet count were significantly different between the highand low-NLR groups(P < 0.05). The five-year survival rate of the high-NLR group was 17.0%, which was significantly lower than that of the low-NLR group(43.6%; 17.0% vs 43.6%, P < 0.05). The univariate analysis results showed that the five-year survival rate was related to age, tumour size, T staging, N staging, TNM staging, carcinoembryonic antigen value and NLR(P < 0.05). Multivariate analysis results showed that the NLR was an independent risk factor that likely affected the five-year survival rate of GC patients(P = 0.003, HR = 0.626, 95%CI: 0.460-0.852). CONCLUSION: The preoperative NLR could be used as a prognostic factor for GC patients; in particular, a high NLR corresponded to poor prognosis of GC patients.

Preparation of a Novel Highly Effective and Environmental Friendly Wheat Seed Coating Agent

A novel environmental friendly wheat seed coating agent was prepared from the natural polymer,biological pesticide,microfertilizer,microelements and other additives.The laboratory and field test results showed that it could enhance the yield up to 16% and reduce its input cost to 1/6 as compared with the conventional wheat seed coating agent.It is safe without causing any pollution and would have significant economic and environmental benefits.

Effects of N:P ratio of Artemisia ordosica on growth influenced by soil calcium carbonate

Soil calcium carbonate(CaCO_3) has a strong solid phosphorus effect, and high content of CaCO_3 can significantly reduce the effectiveness of soil phosphorus. To reveal the limiting effect of soil CaCO_3 on the growth of plants on sand land and its mechanism of plant physiology, we performed pot experiments with a two-factor randomized block design and a three-factor orthogonal design for different soil CaCO_3 content treatments using Artemisia ordosica seedlings. In the experiments, we surveyed plant height, aboveground biomass, root length and root weight and analyzed N, P concentrations and RNA content of the seedlings, and discussed the relationships between relative growth rate(RGR) of the seedlings and N:P ratio as well as RNA. Results show that, the RGRs of plant height and above-ground biomass of the seedlings decreased significantly with the increase of soil CaCO_3 content, and those for root length and root weight decreased. The RGRs of plant height and above-ground biomass of the seedlings were significantly negatively correlated with leaf N:P ratios, but significantly positively correlated with leaf RNA content and leaf P concentrations. It can be seen that soil CaCO_3 is a stress factor for the growth of A. ordosica seedlings, and the growth response of the seedlings under the influence of soil CaCO_3 is in line with the Growth Rate Hypothesis.

Experimental Investigation on Combustion Performance of Solid Propellant Subjected to Erosion of Particles with Different Concentrations

A test device with rectangular channel is developed to study the combustion performance of solid propellant in high temperature particles erosion.The flowfields in this newdevice and a test device with circular channels are simulated numerically.The particle erosion experiments in these two devices are carried out under different particle concentrations.The results showthat the test device with rectangular channel can effectively improve the clarity and precision of combustion diagnosis image and can be used for research on combustion performance of solid propellant under lowconcentration particle erosion;the circular channel device has good particle convergent effect,provides high concentration particle erosion,and can be used for research on the combustion performance of solid propellant under high concentration particle erosion.The experiment data indicates that the propellant burning rate does not change obviously in lower particle concentration;the propellant with lower static burning rate increases remarkably under particle erosion,while the propellant with high static burning rate is not sensitive to the particle erosion.

Influence of Different C/N Ratios on Aerobic Denitrification Characteristics of the Strain

[ Objective] The research aimed to study influence of different C/N ratios on aerobic denitdfication characteristics of the strain. [ Method] 5 aerobic denitdfying bacteria were isolated from activated sludge at low temperature and low C/N ratio, and their denitdfication capabilities were verified. Influence of different C/N ratios on denitdfication capability of the strain was determined. [ Result] In the five isolated aerobic denitdf- ying bacteria, except HFX08 was G-, HFX00, HFX01, HFX12 and HFX13 were G ＋. HFX08 belonged to Pseudomonas, and other strains be- longed to Acinetobacter. As C/N ratio increased, denitdfication velocity increased, and the highest removal rate of nitrogen for the five strains could reach over 92%. [ Conclusion] The research could provide reference for design and operation of the sewage treatment process with low C/N ratio in winter in the north.

Effect of injection angle,density ratio,and viscosity on droplet formation in a microfluidic T-junction

The T-junction microchannel device makes available a sharp edge to form micro-droplets from biomaterial solutions. This article investigates the effects of injection angle, flow rate ratio, density ratio,viscosity ratio, contact angle, and slip length in the process of formation of uniform droplets in microfluidic T-junctions. The governing equations were solved by the commercial software. The results show that contact angle, slip length, and injection angles near the perpendicular and parallel conditions have an increasing effect on the diameter of generated droplets, while flow rate, density and viscosity ratios, and other injection angles had a decreasing effect on the diameter.

FSH/LH Ratio as a Predictor of the IVF Outcome in Young Women

In Vitro Fertilization (IVF) is the treatment for many causes of infertility. Many studies were done to investigate different factors that can affect the success rate. This study was conducted to evaluate if cycle day 3 (CD3) follicle-stimulating hormone (FSH)/luteinizing hormone (LH) ratio can be a predictor for the IVF outcome in young sub-fertile females ≤ 35 years with normal baseline FSH. This is a retrospective case control study conducted at the Centre of Fertility and Andrology Care (CFAC) in Egypt where 235 sub-fertile women underwent IVF. Patients were grouped based on CD3 FSH/LH ratio. Group A consisted of ≤35-year-old women with FSH/LH ratio ≤35-year-old women with FSH/LH ratio ≥ 2. The primary outcomes include the fertilization rate, implantation rate and the clinical pregnancy rate. The secondary outcomes include duration and the total dose of gonadotrophin used. We found that, there was no significant difference in the total dose of gonadotropin used during the IVF cycle. Also, there was no significant difference in the number of retrieved and fertilized oocytes and the number of good embryos. Clinical pregnancy rate was the same in both groups. In conclusion, in patients younger than 35 years, CD3 FSH/LH ratio is not a predictor for IVF outcome.

Fatigue Damage Calculated by the Ratio-Method to Materials and Its Machine Part

Several new calculating equations on the damage-evolving rate are suggested for describing the elastic-plastic behavior of some materials under un-symmetric cyclic loading. And the estimating formulas are given of the life relative to varied damage value D oi at each loading history. The method is to adopt the ratio of plastic strain range to elastic strain range as the stress-strain parameter, using the staple material constants as the material parameters in damage calculating expression. And it gives out a new concept of the compositive material constant, that has a functional relation with the staple material constants, average stress,average strain and critical loading time. In addition, it calculates fatigue damage as example for a part of car, its calculating results are accordant with the Landgraf’s equation, and calculating precision is more rigorous, so could avoid unnecessary fatigue tests and will be of practical significance to stint times, manpower and capitals, and to provide convenience for engineering applications.