Chinese traditional handmade papers,due to their numerous names,have been misunderstood by the public about raw materials for a long time.This manuscript aims to introduce the raw materials of traditional Chinese hand...Chinese traditional handmade papers,due to their numerous names,have been misunderstood by the public about raw materials for a long time.This manuscript aims to introduce the raw materials of traditional Chinese handmade paper in a botanical aspect in chronological order.Chinese handmade paper’s raw materials are divided into two groups,bast fiber and grass fiber.Bast fiber paper includes ramie-made rag paper,mulberry and paper mulberry paper,Thymelaeaceae paper,and vine paper.Stalk and grass fiber paper includes bamboo paper,grass paper,and stalk paper.展开更多
The traditional alumina-silicate raw materials, for example, clays, in the precalcining technique of cement production, have been replaced by low grade and high silica content sandstones, shales, and industrial waste ...The traditional alumina-silicate raw materials, for example, clays, in the precalcining technique of cement production, have been replaced by low grade and high silica content sandstones, shales, and industrial waste residues, including fly ashes, slag, and others. The results are the change of compositions and characteristics of raw materials applied and a great effect on cement calcination process and clinker formation. In this work, the cement clinker formation process of different alumina-silicate raw materials to replace clay raw material was studied by chemical analysis, X-ray diffraction, differential thermal analysis, and high temperature microscope based on the characteristics of the alumina-silicate raw materials. The formation heat of the clinker was determined by the acid dissolution method. Influence of different alumina-silicate raw materials on the clinker burnability and formation process was studied. The results show that the changing of alumina- silicate raw materials, especially using industrial waste residues, can reduce the formation temperature of high temperature liquid phases, improve the burnability of raw materials, reduce the formation temperature and formation heat of clinker. And this study also observed the formation temperature and transformation of high temperature liquid phases in the heating process of raw materials by high temperature microscope.展开更多
Thirty four α-substituted or α, α-disubstituted-( 1-methylcyclohexen-4-yl )methanols and α-substituted or α,α-disubstituted-(4-methylcyclohexyl) methanols weresynthesized. Thirty two of them are new compounds. 1...Thirty four α-substituted or α, α-disubstituted-( 1-methylcyclohexen-4-yl )methanols and α-substituted or α,α-disubstituted-(4-methylcyclohexyl) methanols weresynthesized. Thirty two of them are new compounds. 1H NMR and IR spectra of allthe compounds were determined, MS spectra of some of them were obtained as well.The characteristic odors were evaluated.Keywords Fragrance raw materials,α-Terpineol analogues, Synthesis, Structuredetermination展开更多
The distribution of refractory raw material resources , its throughput capacity, product varieties and quality as well as market situation in China were investigated.
Carboxyethylation pretreatment was used to prepare microfibrillated cellulose(MFC)in this study.In order to evaluate the adaptability of this pretreatment method,carboxyethylated MFC was prepared from six different ce...Carboxyethylation pretreatment was used to prepare microfibrillated cellulose(MFC)in this study.In order to evaluate the adaptability of this pretreatment method,carboxyethylated MFC was prepared from six different cellulosic materials.The carboxyl content,degree of polymerization,water retention value,charge density,chemical structure,size distribution,and micromorphology of the materials before and after pretreatment and grinding were studied and compared.The viscosity,ultraviolet(UV)transmittance,and thermal stability of the MFC samples at a certain concentration were determined.The results showed that the carboxyl content,water retention value,charge density,degree of polymerization,size distribution,and micromorphology of the pretreated and ground samples varied with those of the raw materials.The initial viscosity varied based on the type of raw material used.The MFC suspension prepared from cotton linter pulp had the highest UV transmittance,while the MFC prepared from bleached softwood kraft pulp had the highest viscosity at a low shear rate.After thermal degradation,the amount of residual char from the MFC prepared with the thermo-mechanical pulp was slightly higher than that of the other MFCs.This study demonstrates that carboxyethylation is an effective pretreatment method for different cellulosic materials.展开更多
1-Substituted- 4-trimethylsilylcyclohex- 3-enol and 1-substituted- 4-trimetnylsilyl-cyclohexanol, 4-trimethylsilylcyclohex-3-enol and 4-trimethylsilylcyclohexanol, and some of their esters and carbon counterparts were...1-Substituted- 4-trimethylsilylcyclohex- 3-enol and 1-substituted- 4-trimetnylsilyl-cyclohexanol, 4-trimethylsilylcyclohex-3-enol and 4-trimethylsilylcyclohexanol, and some of their esters and carbon counterparts were synthesized. Structures of the nineteen new compounds were determined by 1H NMR, IR and MS. Their odors are evaluated.展开更多
The present study examines material quarrying, utilization, and exploitation strategy with respect to availability, quality and distribution at Donggutuo, a Lower Pleistocene archeological site in the Nihewan Basin of...The present study examines material quarrying, utilization, and exploitation strategy with respect to availability, quality and distribution at Donggutuo, a Lower Pleistocene archeological site in the Nihewan Basin of North China. Through identification of the bedrocks in the vicinity, the analysis reveals that raw materials available at the Donggutuo site are mainly chert, dolomicrite, siliceous dolomite, siliceous limestone, tectonic breccia, quartzite and intermediate lava. Related documents and a geological survey of the area demonstrate that the chert was quarried from dolomite within the Gaoyuzhuang Formation of the Mesoproterozoic Changcheng Group, and the quartzite from the Yousuopu Formation of the Archeozoic Qianxi Group, as well as from Jurassic volcanic lava. Fractures formed by tectonic movements of the Yanshan Stage and the Himalaya Stage made it convenient to quarry these materials. It is observed that fragmentary rock pieces were directly collected and quarried from local fracture belts and that this became the principal strategy of raw material exploitation adopted by the Donggutuo toolmakers. In general, raw materials were not efficiently used, and many of them could have been reduced, retouched and used again. Some suggestions are also proposed to improve the understanding of earlyhumans’ tool complex in the Nihewan Basin.展开更多
Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of persona...Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.展开更多
Recently the State Council decided to extend the period ofduty exemption for imports of equipment and raw materials by foreign-invested enterprises below US$30 million.In order to administrate import and export activi...Recently the State Council decided to extend the period ofduty exemption for imports of equipment and raw materials by foreign-invested enterprises below US$30 million.In order to administrate import and export activities in light ofinternational practice and apply a unified, fair and standardizedpolicy toward import duties, the State Council, on December28,1995, decided to reform and adjust the policies of import duties by fairly significant reduction of the overall import tariff leveland elimination of preferences of import-duty exemption for mostimport items, which was also applicable to imports of equipmentand raw materials by foreign-invested enterprises set up since April1st, 1996. At the same time, with a view to maintaining the policycontinuity and relative stability, those enterprises established before March 31, 1996 were allowed an extended duty-exemptionperiod of one to two years for importation of equipment and rawmaterials(referring to construction materials, etc.) if such importswere below the value of their total investments, and for展开更多
On April 20-22 2011,China＇s Refractories Raw Materials SYmposium,co-sponsored by Refractories Branch of The Chinese Society for Metals and China Henan Refractory Industry Association,was held successfully in Zhengzhou.
The refractory raw materials used in recent years were introduced,including metal and intermetallic compounds（ aluminum,silicon,ferrosilicon,etc.）,nonoxide raw materials（ Si3N4 and ferrosilicon nitride）.The develo...The refractory raw materials used in recent years were introduced,including metal and intermetallic compounds（ aluminum,silicon,ferrosilicon,etc.）,nonoxide raw materials（ Si3N4 and ferrosilicon nitride）.The developmental tendency of China＇s raw refractories in the future was also discussed.展开更多
The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making...The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making concrete material,slurry and cement are needed to mix,then cement slurry and sand are mixed into mortar according to the corresponding proportion,and aggregate is added to mortar to form concrete building material.In the process of concrete preparation,the most important construction link is mixing,which needs to be fully stirred to make the performance of concrete meet the construction needs.In the process of concrete construction technology development,both mix ratio and production technology have become more and more mature,but there are still some problems,which have an impact on the quality of concrete[1].Therefore,this paper discusses the quality control of concrete raw materials according to the construction process of road and bridge.展开更多
According to the statistics of production and marketing data of relevant raw materials and products of enterprises above designated size by the Surfactant Committee of China Cleaning Industry Association(CCIA),the pro...According to the statistics of production and marketing data of relevant raw materials and products of enterprises above designated size by the Surfactant Committee of China Cleaning Industry Association(CCIA),the production status and market of main raw materials and products in 2019 were analyzed,and it was pointed out that the trend of traditional raw materials and products in domestic surfactant industry tended to be stable in 2019,with more obvious characteristics of scale and intensification.It was also found that the potential for future market development of specialty products is great because of the rapid growth of production and market,while the feature of high added value contained in needs to be further improved.展开更多
The aim of this paper was to compare the annual economic impact of a large-scale bio-coal pellet plant by raw material specifically for the Finnish Lakeland region. In this study, the total production volume of the th...The aim of this paper was to compare the annual economic impact of a large-scale bio-coal pellet plant by raw material specifically for the Finnish Lakeland region. In this study, the total production volume of the theoretical plant was 200,000 tons per year and the raw wood materials used were birch pulpwood, spruce pulpwood, pine pulpwood, and energy wood. These wood materials were young delimbed wood from early thinnings. The main goal of the paper was to illustrate that the energy content differences of raw wood materials affect the economic profitability of a bio-coal pellet plant at regional level. In this case, wood type also has a regional economic impact, which the pellet plant can influence through its raw wood material choices. The raw material comparison was based on measured data and not computational or literary data alone. The study found that lower solid wood energy densities caused higher relative costs for the total supply chain. A parallel phenomenon occurred with the required gross margin of the pellets, where lower energy content caused higher required gross margin for pellet sales. The gross margin was also sensitivity analyzed at different discount rates from 5% to 20%. At each required discount rate, the highest annual economic impact on the region was found for birch pellets, with values of 36.95 - 42.66 million €. Spruce pellets had the smallest annual economic impact, although it had the highest final pellet price in the same cases. The different economic effects were caused by the energy volumes sold.展开更多
文摘Chinese traditional handmade papers,due to their numerous names,have been misunderstood by the public about raw materials for a long time.This manuscript aims to introduce the raw materials of traditional Chinese handmade paper in a botanical aspect in chronological order.Chinese handmade paper’s raw materials are divided into two groups,bast fiber and grass fiber.Bast fiber paper includes ramie-made rag paper,mulberry and paper mulberry paper,Thymelaeaceae paper,and vine paper.Stalk and grass fiber paper includes bamboo paper,grass paper,and stalk paper.
基金Funded by the National Basic Research Program of China("973"Program)(No.2009CB623102)the National High Technology Research and Development Program of China("863"Program)(No.2013AA031602)
文摘The traditional alumina-silicate raw materials, for example, clays, in the precalcining technique of cement production, have been replaced by low grade and high silica content sandstones, shales, and industrial waste residues, including fly ashes, slag, and others. The results are the change of compositions and characteristics of raw materials applied and a great effect on cement calcination process and clinker formation. In this work, the cement clinker formation process of different alumina-silicate raw materials to replace clay raw material was studied by chemical analysis, X-ray diffraction, differential thermal analysis, and high temperature microscope based on the characteristics of the alumina-silicate raw materials. The formation heat of the clinker was determined by the acid dissolution method. Influence of different alumina-silicate raw materials on the clinker burnability and formation process was studied. The results show that the changing of alumina- silicate raw materials, especially using industrial waste residues, can reduce the formation temperature of high temperature liquid phases, improve the burnability of raw materials, reduce the formation temperature and formation heat of clinker. And this study also observed the formation temperature and transformation of high temperature liquid phases in the heating process of raw materials by high temperature microscope.
文摘Thirty four α-substituted or α, α-disubstituted-( 1-methylcyclohexen-4-yl )methanols and α-substituted or α,α-disubstituted-(4-methylcyclohexyl) methanols weresynthesized. Thirty two of them are new compounds. 1H NMR and IR spectra of allthe compounds were determined, MS spectra of some of them were obtained as well.The characteristic odors were evaluated.Keywords Fragrance raw materials,α-Terpineol analogues, Synthesis, Structuredetermination
基金The text of this paper was translated from Chinese into English by Mr. Peng Xigao revised by Mrs.Zhang Yongfang, Luoyang Institute of Refractories Research.
文摘The distribution of refractory raw material resources , its throughput capacity, product varieties and quality as well as market situation in China were investigated.
基金the financial support from the National Key Research and Development Program of China(2017YFB0307901,2017YFE0102500).
文摘Carboxyethylation pretreatment was used to prepare microfibrillated cellulose(MFC)in this study.In order to evaluate the adaptability of this pretreatment method,carboxyethylated MFC was prepared from six different cellulosic materials.The carboxyl content,degree of polymerization,water retention value,charge density,chemical structure,size distribution,and micromorphology of the materials before and after pretreatment and grinding were studied and compared.The viscosity,ultraviolet(UV)transmittance,and thermal stability of the MFC samples at a certain concentration were determined.The results showed that the carboxyl content,water retention value,charge density,degree of polymerization,size distribution,and micromorphology of the pretreated and ground samples varied with those of the raw materials.The initial viscosity varied based on the type of raw material used.The MFC suspension prepared from cotton linter pulp had the highest UV transmittance,while the MFC prepared from bleached softwood kraft pulp had the highest viscosity at a low shear rate.After thermal degradation,the amount of residual char from the MFC prepared with the thermo-mechanical pulp was slightly higher than that of the other MFCs.This study demonstrates that carboxyethylation is an effective pretreatment method for different cellulosic materials.
基金Supported by the National Natural Science Foundation of China
文摘1-Substituted- 4-trimethylsilylcyclohex- 3-enol and 1-substituted- 4-trimetnylsilyl-cyclohexanol, 4-trimethylsilylcyclohex-3-enol and 4-trimethylsilylcyclohexanol, and some of their esters and carbon counterparts were synthesized. Structures of the nineteen new compounds were determined by 1H NMR, IR and MS. Their odors are evaluated.
文摘The present study examines material quarrying, utilization, and exploitation strategy with respect to availability, quality and distribution at Donggutuo, a Lower Pleistocene archeological site in the Nihewan Basin of North China. Through identification of the bedrocks in the vicinity, the analysis reveals that raw materials available at the Donggutuo site are mainly chert, dolomicrite, siliceous dolomite, siliceous limestone, tectonic breccia, quartzite and intermediate lava. Related documents and a geological survey of the area demonstrate that the chert was quarried from dolomite within the Gaoyuzhuang Formation of the Mesoproterozoic Changcheng Group, and the quartzite from the Yousuopu Formation of the Archeozoic Qianxi Group, as well as from Jurassic volcanic lava. Fractures formed by tectonic movements of the Yanshan Stage and the Himalaya Stage made it convenient to quarry these materials. It is observed that fragmentary rock pieces were directly collected and quarried from local fracture belts and that this became the principal strategy of raw material exploitation adopted by the Donggutuo toolmakers. In general, raw materials were not efficiently used, and many of them could have been reduced, retouched and used again. Some suggestions are also proposed to improve the understanding of earlyhumans’ tool complex in the Nihewan Basin.
文摘Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.
文摘Recently the State Council decided to extend the period ofduty exemption for imports of equipment and raw materials by foreign-invested enterprises below US$30 million.In order to administrate import and export activities in light ofinternational practice and apply a unified, fair and standardizedpolicy toward import duties, the State Council, on December28,1995, decided to reform and adjust the policies of import duties by fairly significant reduction of the overall import tariff leveland elimination of preferences of import-duty exemption for mostimport items, which was also applicable to imports of equipmentand raw materials by foreign-invested enterprises set up since April1st, 1996. At the same time, with a view to maintaining the policycontinuity and relative stability, those enterprises established before March 31, 1996 were allowed an extended duty-exemptionperiod of one to two years for importation of equipment and rawmaterials(referring to construction materials, etc.) if such importswere below the value of their total investments, and for
文摘On April 20-22 2011,China＇s Refractories Raw Materials SYmposium,co-sponsored by Refractories Branch of The Chinese Society for Metals and China Henan Refractory Industry Association,was held successfully in Zhengzhou.
文摘The refractory raw materials used in recent years were introduced,including metal and intermetallic compounds（ aluminum,silicon,ferrosilicon,etc.）,nonoxide raw materials（ Si3N4 and ferrosilicon nitride）.The developmental tendency of China＇s raw refractories in the future was also discussed.
文摘The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making concrete material,slurry and cement are needed to mix,then cement slurry and sand are mixed into mortar according to the corresponding proportion,and aggregate is added to mortar to form concrete building material.In the process of concrete preparation,the most important construction link is mixing,which needs to be fully stirred to make the performance of concrete meet the construction needs.In the process of concrete construction technology development,both mix ratio and production technology have become more and more mature,but there are still some problems,which have an impact on the quality of concrete[1].Therefore,this paper discusses the quality control of concrete raw materials according to the construction process of road and bridge.
文摘According to the statistics of production and marketing data of relevant raw materials and products of enterprises above designated size by the Surfactant Committee of China Cleaning Industry Association(CCIA),the production status and market of main raw materials and products in 2019 were analyzed,and it was pointed out that the trend of traditional raw materials and products in domestic surfactant industry tended to be stable in 2019,with more obvious characteristics of scale and intensification.It was also found that the potential for future market development of specialty products is great because of the rapid growth of production and market,while the feature of high added value contained in needs to be further improved.
基金the Auramo Foundation for funding that made this study possible.
文摘The aim of this paper was to compare the annual economic impact of a large-scale bio-coal pellet plant by raw material specifically for the Finnish Lakeland region. In this study, the total production volume of the theoretical plant was 200,000 tons per year and the raw wood materials used were birch pulpwood, spruce pulpwood, pine pulpwood, and energy wood. These wood materials were young delimbed wood from early thinnings. The main goal of the paper was to illustrate that the energy content differences of raw wood materials affect the economic profitability of a bio-coal pellet plant at regional level. In this case, wood type also has a regional economic impact, which the pellet plant can influence through its raw wood material choices. The raw material comparison was based on measured data and not computational or literary data alone. The study found that lower solid wood energy densities caused higher relative costs for the total supply chain. A parallel phenomenon occurred with the required gross margin of the pellets, where lower energy content caused higher required gross margin for pellet sales. The gross margin was also sensitivity analyzed at different discount rates from 5% to 20%. At each required discount rate, the highest annual economic impact on the region was found for birch pellets, with values of 36.95 - 42.66 million €. Spruce pellets had the smallest annual economic impact, although it had the highest final pellet price in the same cases. The different economic effects were caused by the energy volumes sold.
