Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructur...Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructure and composition distribution of the composite interface were investigated.The results show that semi-solid layer with a certain thickness forms near the interface due to the effect of cooling plate,which ensures successful implementation of casting the composite ingot.Two different aluminum alloys are well bonded metallurgically.The mechanical properties of composite interface were measured,the tensile and shearing strengths of composite interface are 105 and 88 MPa,respectively,which proves that the composite interface is a kind of metallurgical bonding.展开更多
The actual effective partition coefficients of Mg and Cr in a cross-section of a dendrite arm in a direct-chill(DC)-casting ingot of 7475 aluminum alloy are obtained.Meanwhile,by analyzing the microstructure,the mecha...The actual effective partition coefficients of Mg and Cr in a cross-section of a dendrite arm in a direct-chill(DC)-casting ingot of 7475 aluminum alloy are obtained.Meanwhile,by analyzing the microstructure,the mechanism of the heterogeneous distribution of E(Al_(18)Mg_(3)Cr_(2))dispersoids in this DC ingot is revealed.The results show that the actual effective partition coefficients of Mg and Cr are 0.650 and 1.392,respectively,and they describe the heterogeneous distributions of Mg and Cr along the direction of radius of the cross-section of the dendrite arm of the alloy.After homogenization treatment at 470℃ for 24 h,Mg diffuses uniformly,but Cr hardly diffuses.Both the concentrations of Mg and Cr and the sites of heterogeneous nucleation in the alloy are the determinants of the formation of E dispersoids simultaneously.The heat treatment at 250℃ for 72 h provides a large number of the sites of heterogeneous nucleation of the formation of fine E dispersoids that will be formed in the center of the cross-section during the subsequent heat treatment at higher temperature.展开更多
基金Project (2005CB623707) supported by the National Basic Research Program of China
文摘Three-layer composite ingot of 4045/3004/4045 aluminum alloys was prepared by direct-chill semi-continuous casting process,the temperature field distribution near the composite interface,macro-morphology,microstructure and composition distribution of the composite interface were investigated.The results show that semi-solid layer with a certain thickness forms near the interface due to the effect of cooling plate,which ensures successful implementation of casting the composite ingot.Two different aluminum alloys are well bonded metallurgically.The mechanical properties of composite interface were measured,the tensile and shearing strengths of composite interface are 105 and 88 MPa,respectively,which proves that the composite interface is a kind of metallurgical bonding.
基金financially supported by the National Natural Science Foundation of China(No.51871043)Fundamental Research Funds for the Central Universities of China(No.N180212010)Liaoning Natural Science Foundation of China(No.2019-MS-113)。
文摘The actual effective partition coefficients of Mg and Cr in a cross-section of a dendrite arm in a direct-chill(DC)-casting ingot of 7475 aluminum alloy are obtained.Meanwhile,by analyzing the microstructure,the mechanism of the heterogeneous distribution of E(Al_(18)Mg_(3)Cr_(2))dispersoids in this DC ingot is revealed.The results show that the actual effective partition coefficients of Mg and Cr are 0.650 and 1.392,respectively,and they describe the heterogeneous distributions of Mg and Cr along the direction of radius of the cross-section of the dendrite arm of the alloy.After homogenization treatment at 470℃ for 24 h,Mg diffuses uniformly,but Cr hardly diffuses.Both the concentrations of Mg and Cr and the sites of heterogeneous nucleation in the alloy are the determinants of the formation of E dispersoids simultaneously.The heat treatment at 250℃ for 72 h provides a large number of the sites of heterogeneous nucleation of the formation of fine E dispersoids that will be formed in the center of the cross-section during the subsequent heat treatment at higher temperature.
