Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems

The in situ synthesis method for titanium matrix composites （TMCs） has obvious technical and economical advantages over other traditional methods. Ultrafine reinforcement particles were formed in situ by chemical reaction between elements or between elements and compounds. Using the approach, contamination at the composite matrix/reinforcement particle interface did not occur, interface bonding was good, and the reinforcement particle was thermodynamically stable. The stage of development of the preparation process for in situ TMCs as well as the thermodynamic analysis of the possible in situ reaction systems was described.

INTERFACE REACTION OF TiC_p-REINFORCED Ti-MATRIX COMPOSITE

ＩＮＴＥＲＦＡＣＥＲＥＡＣＴＩＯＮＯＦＴｉＣｐＲＥＩＮＦＯＲＣＥＤＴｉＭＡＴＲＩＸＣＯＭＰＯＳＩＴＥ①ＺｅｎｇＱｕａｎｐｕ，ＭａｏＸｉａｏｎａｎ，ＬｕＦｅｎｇＮｏｒｔｈｗｅｓｔＩｎｓｔｉｔｕｔｅｆｏｒＮｏｎｆｅｒｏｕｓＭｅｔａｌＲｅｓｅａｒｃｈ，...

Interface reaction in aluminium matrix composite at laser welding

Interface reaction of SiC w/6061Al aluminium matrix composite subjected to laser welding was studied. It is pointed out that the main reason for bad weldability of the material is concerned with the interface reaction during the welding. Effects of welding parameters on interface reaction were also investigated. The results show that the interface bonding state can be improved by laser beam, and the main welding parameter affecting the strength of weld is laser output power. The smaller the output power, the lower the extent of interface reaction and the better the mechanical properties.

Effect of interfacial reactions on solid erosion of Al_(18) B_4O_(33) whisker-reinforced AC4C Al alloy matrix composites

Solid erosion of as cast and treated 19.5%(volume fraction) Al 18 B 4O 33 whisker/AC4C Al composites was investigated at room temperature under steady state conditions. The results indicated that the interfacial reaction between the whisker and matrix alloy have an effect on the erosion characteristics of the composites. The erosion resistance of the composites with a strongly bonded whisker matrix interface and the higher whisker strength resulted from suitable reaction treatment can be improved at high impact angles and is the same as the as cast composites at low angle. For the composites after excessive reaction treatment, the weak and brittle interface fractures easily at small strains, and the whiskers with relative low strength and low hardness at the specimen surface can not effectively resist the microcutting or microploughing action, thus the composites exhibit reduced erosion resistance.

Reaction Processes of the Titanium Matrix Composites Fabricated from Ti-Al-B2O3 System

Titanium matrix composites reinforced with a-Al2O3 and TiB2 particles were fabricated by in situ synthesis from a Ti-Al-B2O3 system. The reaction processes and microstructure were analyzed by using differential scanning calorimetry（DSC）, scanning electron microscopy（SEM） and X-ray diffraction（XRD）. The results showed that the reactions in the Ti-Al-B2O3 system can occur spontaneously and consist of three steps： 1） 15 Al ＋ 7B2O3 → 7α-Al2O3 ＋ AlB12 ＋ 2B; 2） 14 B ＋ 2Al → AlB12 ＋ AlB2 and 3） 7Ti ＋ AlB（12） ＋ AlB2 → 7TiB2 ＋ 2Al. The final reinforcements were composed of α-Al2O3 and TiB2 particles, which were uniformly distributed in the titanium matrix.

PARTICLES ANALYSIS OF Al_2O_3 PARTICLE REINFORCED ZL202 MATRIX COMPOSITES PREPARED BY IN-SITU REACTION

ZL202 matrix composite reinforced by Al2O3 particles was prepared by combining in-situ reaction and casting techniques. Particles' size in the composites was from 1 to 5 microns in diameter. X-ray diffraction analysis verified that the reinforcing particleswere δ-Al2O3 which belong to γ-Al2O3 series. The wetting angle between matrix andreinforcement was less than 90°. Energy spectrum analysis indicated that the reactionin bell cover pressing process took place not so completely as in flouring stir process. When the reaction was finished, the matrix was still ZL202 alloy in both.processes.

Matrix metalloproteinase-2 and tissue inhibitor of metalloproteinase-1 expression in fibrotic rat liver

INTRODUCTIONLiver fibrosis is an excessive deposition ofextracellular matrix(ECM)resulted from bothincreased synthesis and decreased degradation.Matrix metalloproteinases(MMPs)represent agroup of neutral proteinases with variable

Effects of rare earth element lanthanum on the microstructure of copper matrix diamond tool materials

Effects of rare earth element La on the microstructure of Cumatrix diamond tools were researched under the conditions of variousmaterials components and the process parameters in order to improvematerials properties. SEM, XPS and X-ray were used to investigate thefracture section, microstructure and the element valence inmaterials. The Results shown that the combination of rare earthelement La and transition element Ti is advantageous to the bondingstate Between diamond particles and matrix, so it can improve thematerials properties. Suitable sintering temperature is 790 deg. C.

Formation of composites fabricated by exothermic dispersion reaction in Al-TiO_2-B_2O_3 system

The formation of aluminum matrix composites fabricated by exothermic dispersion reaction in Al-TiO2-B2O3 system was investigated. The thermal analysis results show that the reactions are spontaneous and exothermic. The Gibbs free energy of α-Al2O3 is the lowest among all the combustion products, followed by TiB2 and Al3Ti. It is noted that when the B2O3/TiO2 mole ratio is below 1, the reaction products are composed of particle-like α-Al2O3, TiB2 and rod-like Al3Ti. The α-Al2O3 crystallites, resulting from the reaction between Al and TiO2 or B2O3, are segregated at the grain boundaries due to a lower wettability with the matrix. SEM micrographs show that rod-like Al3Ti phase distributes uniformly in the matrix. When the B2O3/TiO2 mole ratio is around 1, the Al3Ti phase almost disappears in the composites, and the distribution of α-Al2O3 particulates is improved evidently.

C/Ti/Cu interfacial reaction in SiCf/Cu composites

Continuous SiC fiber reinforced copper matrix （SiC~/Cu） composites were prepared by fiber coating method, and Ti6A14V interlayer was introduced as an interfacial modification coating to improve the interfacial bonding strength. The interfacial reaction characteristics were investigated by transmission electron microscopy （TEM）. The results show that nearly all the titanium atoms reacted with the carbon coating of SiC fibers to form two layers of TiC. Also, a thin copper layer that is sandwiched between these two layers was detected. No Ti-Cu interfacial reaction product was observed. The formation process of the interfacial reaction along with its mechanism was discussed.

Effect of aluminum borate whisker coating on interface and mechanical properties of 6061Al matrix composites

Copper coating was deposited on the surface of aluminum borate whisker by an electroless plating method.This method was used to modify the interfacial property of squeeze-casting aluminum borate whisker reinforced 6061Al matrix composite.Interface observation indicates that the spinel reaction(MgAl2O4) is hindered by the copper coating,and the difference in interfacial reaction degree affects the tensile property and aging behavior of the composite.For the composite with less spinel reaction(MgAl2O4),its peak-aging process are postponed due to less depletion of magnesium.On the fracture surface of copper-coated composite dimples and fractures of whiskers are more,but on the fracture surface of uncoated composite pull-out of whiskers are more than that on the coated one.In uncoated composite the fracture generally originates from the near-interface-region.

Expression of matrix metalloproteinases 2 and 9 in human gastric cancer and superficial gastritis

AIM:To assess expression of matrix metalloproteinases 2(MMP2)and MMP9 in gastric cancer,superficial gastritis and normal mucosa,and to measure metalloproteinase activity.METHODS:MMP2 and MMP9 mRNA expression was determined by quantitative real-time polymerase chain reaction.Normalization was carried out using three different factors.Proteins were analyzed by quantitative gelatin zymography(qGZ).RESULTS:18S ribosomal RNA(18SRNA)was very highly expressed,while hypoxanthine ribosyltransferase-1(HPRT-1)was moderately expressed.MMP2 was highly expressed,while MMP9 was not detected or lowly expressed in normal tissues,moderately or highly expressed in gastritis and highly expressed in cancer.Relative expression of 18SRNA and HPRT-1 showed no significant differences.Significant differences in MMP2 and MMP9 were found between cancer and normal tissue,but not between gastritis and normal tissue.Absolute quantification of MMP9 echoed this pattern,but differential expression of MMP2 proved conflictive.Analysis by qGZ indicated significant differences between cancer and normal tissue in MMP-2,total MMP-9,250 and 110 kDa bands.CONCLUSION:MMP9 expression is enhanced in gastric cancer compared to normal mucosa;interpretation of differential expression of MMP2 is difficult to establish.

DSC analysis of Al_2O_3-SiO_2 short fiber reinforced Al-Cu-Mg alloy matrix composites

AlO-SiOshort fiber/Al-Cu-Mg matrix composites containing different Mg contents were fabricated using squeeze casting method.Differential scanning calorimeter(DSC) was used to investigate the reaction condition of the composites with different Mg contents.The microstructure of the composites was observed by transmission electron microscopy(TEM).The experimental results show that the Mg content added to the 2024Al matrix significantly affects interfacial condition between Al2O3-SiO2 short fiber and aluminum matrix.At the temperature above 538 ℃,Al2O3-SiO2 short fiber is prone to react with Mg and forms MgAl2O4 reaction product when Mg content added to aluminum matrix is above 1.0wt%.

Expression pattern of matrix metalloproteinases-13 in a rat model of alcoholic liver fibrosis

BACKGROUND: Interstitial collagenase has been considered as an essential enzyme for collagenolysis in liver fi-brosis, because type Ⅰ and Ⅲ collagens increase predominantly in liver fibrosis. The present study aimed to demonstrate the gene expression of matrix metalloproteinases-13 (MMP-13) in the progressive phases of ethanol induced experimental liver fibrosis in rats. METHODS: Thirty-four Sprague-Dawley rats were randomly divided into two groups. The experimental group (24 rats) was given ethanol (44% , 7 g/kg) every day and the control group (10) was given normal saline. Liver samples were harvested from experimental rats at 4, 12 and 24 weeks respectively. The kinetics of MMP-13 mRNA expression was assayed by semi-quantity reverse transcriptase-poly-merase chain reaction (RT-PCR). RESULTS: In normal rat liver, a faint band for MMP-13 mRNA was observed by RT-PCR (0.24±0.41). The gene expression of MMP-13 was increased in the liver of the rats treated with ethanol for 4 weeks (0. 62 ±0. 54), but it was not considered statistically significant (P >0.05). And the livers from 12-week-treated rats showed a marked mRNA expression(1.65 ±0.47, P <0. 01). Once fibrosis became prominent (24 weeks), a faint band of MMP-13 mRNA was observed (0.39±0.25). CONCLUSION: MMP-13 participates in the degradation of newly-formed matrix in the early phase of rat liver fibrosis induced by ethanol, and it was induced in a distinct time frame.

增强体表面改性在高导热金属基复合材料中的应用

随着电子技术的高速发展和电子器件的更新换代,电子封装材料的性能需求越来越高。金属基复合材料,尤其是铝基和铜基复合材料具有高导热、低膨胀、高稳定性等特点,是具有广阔应用前景的电子封装材料。然而,金刚石、石墨烯、硅等增强体与基体的润湿性差,或者在高温下与基体发生有害的界面反应,限制了此类高导热金属基复合材料的开发和应用。本文简述了金属基复合材料的界面研究进展,结合影响金属基复合材料界面结合的因素,提出了几种改善界面结合的方法。增强体表面改性是改善金属基复合材料界面的重要途径之一,常用工艺有磁控溅射法、化学气相沉积法、溶胶凝胶法、化学镀法等;最后,对增强体表面改性在高热导金属基复合材料中的应用进行分析和展望。

Amlodipine inhibits matrix metalloproteinases expression and secretion in mouse macrophage

Objective To investigate whether the calcium channel blocker amlodipine could inhibit macrophage matrix metalloproteinase-2 (MMP-2) and matrix metalloproteinase-9 (MMP-9) expression and secretion. Methods Peritoneal macrophages were isolated from BALB/C mice and incubated with low (5μg/L ), middle (15μg/L) and high (305μg/L) concentrations of amlodipine, or in the medium alone (controls) for 24 hours, and the expression and secretion of MMP-2 and MM-9 of the cells were analyzed by RT-PCR and gelatin zymography. Results Compared with controls, amlodipine at low concentration had no significant effects on the expression and secretion of either MMP-2 and MMP-9 (P>0.05) at middle concentrationit it could inhibited MMP-2 and MMP-9 expressions completely and significantly reduced the secretion of MMP-9 (P<0.05); but it had no effect on the secretion of MMP-2. At high concentration it also inhibited MMP-2 and MMP-9 expression completely. Conclusion Amlodipine at 15 ig/L inhibited the expression of MMP-2 and MMP-9 and reduced the secretion of MMP-9, suggesting that amlodipine may stabilize atherosclerotic plaque.

Interface reaction and thermodynamic analysis on Al_2O_3-SiO_(2(sf))/AZ91D composite

Al2O3-SiO2(sf)/AZ91D composite was fabricated by squeezing infiltration using preform made of crystallized aluminum silicate short fibers as reinforcement and aluminum phosphate as binder. The interfacial reaction products were investigated by optical microscopy, X-ray diffractometry, scanning electron microscopy, and the thermodynamics was discussed. It is shown that alumina silicate fibers are ideal candidates for the reinforcement of the Mg alloy matrix composites, and the perfect strong interfaces were formed by the chemical reaction between Mg in the magnesium alloy matrix and aluminum phosphate binder through generation of MgO particles. In addition, brittle Mg2Si phase was precipitated at the interface through the reaction between amorphous SiO2 and Mg in the magnesium alloy matrix, which affects the mechanical property of the composite.

The radial correlation of atomic electrons in (e,2e) reaction

We perform a research of the influence of atomic electrons correlation to some characteristics of the (e,2e) process on helium. The Hilleraas type J-matrix approach was used for numerical calculations.

Reaction Mechanisms and Tensile Properties of the Composites Fabricated by Al-B2O3 System

The aluminum matrix composites(AlB2+a-Al2O3)/Al were fabricated by in situ reaction synthesis from an Al-B2 O3 system. The reaction pathways, apparent activation energies and tensile properties were analyzed by using differential scanning calorimetry(DSC), X-ray diffraction(XRD), scanning electron microscopy(SEM), and equipped energy dispersive spectroscopy(EDS). The results showed that there are two-step reactions in the Al-B2 O3 system. The first-step is 15 Al+7 B2 O3→7 aAl2O3+AlB12+2 B and the second-step is 2 B+AlB12+6 Al→7 AlB2. Their corresponding apparent activation energies are 352 and 444 kJ/mol, respectively. The tensile strength and elongation rate of the composites are 190.5 MPa and 6.6%, respectively.Compared with ordinary aluminum base material, the performance is superior. There are many dimple and cracked a-Al2O3 reinforcements in tensile fracture surface layer.