Design to conditioning circuits of dynamic compensation of reactive power in the intelligence voltage controller

The paper introduces one design idea that making use of SCM to control Real-timely the dynamic compensation of reactive power.Firstly,design one Circuit to Sample the voltage and current,and by these datas we can easily calculate the power factor,and Voltage controller in the microcontroller to determine whether input the compensation capacitance according to the size of power factor,the paper also analyzes the principle of capacitance compensation and calculation method. Dynamic compensation for the entire process is quick and accurate.

Dispersed Wind Power Planning Method Considering Network Loss Correction with Cold Weather

In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is proposed in the paper,which takes into account the network loss correction for the extreme cold region.Firstly,an electro-thermal model is introduced to reflect the effect of temperature on conductor resistance and to correct the results of active network loss calculation;secondly,a two-stage multi-objective two-stage decentralised wind power siting and capacity allocation and reactive voltage optimisation control model is constructed to take account of the network loss correction,and the multi-objective multi-planning model is established in the first stage to consider the whole-life cycle investment cost of WTGs,the system operating cost and the voltage quality of power supply,and the multi-objective planning model is established in the second stage.planning model,and the second stage further develops the reactive voltage control strategy of WTGs on this basis,and obtains the distribution network loss reduction method based on WTG siting and capacity allocation and reactive power control strategy.Finally,the optimal configuration scheme is solved by the manta ray foraging optimisation(MRFO)algorithm,and the loss of each branch line and bus loss of the distribution network before and after the adoption of this loss reduction method is calculated by taking the IEEE33 distribution system as an example,which verifies the practicability and validity of the proposed method,and provides a reference introduction for decision-making for the distributed energy planning of the distribution network.

Minimization of Reactive Power Fluctuation in JT-60SA Magnet Power Supply

This paper describes an asymmetric control method for the firing angle and a start/stop timing shift control of four thyristor converters called ＂Booster PS＂ to minimize the reactive power fluctuation during plasma initiation in JT-60SA. From the simulation using the ＂PSCAD/EMTDC＂ code, it is found that these control methods can drastically reduce the reac- tive power induced by the four units of the ＂Booster PS＂. In addition, the voltage fluctuation of the motor-generator connected to the ＂Booster PS＂ is expected to be suppressed. This can also contribute to achieve stable control of the JT-60SA magnet power supplies.

基于LESO的MMC-RPC反馈线性化直接功率控制

模块化多电平铁路功率调节器作为一个耦合的多变量非线性系统,传统PI控制的直接功率控制难以实现对系统的精确解耦.本文提出了一种基于线性扩张状态观测器的反馈线性化直接功率控制方法,根据Lie导数构建了模块化多电平铁路功率调节器(MMC-RPC)两输入/两输出功率仿射模型,设计了精确反馈线性化功率解耦控制器.针对不确定因素等扰动对精确反馈线性化控制效果的影响,设计了线性扩张状态观测器对扰动进行观测和补偿,实现了功率的精确跟踪控制.最后,通过MATLAB/Simulink平台搭建仿真模型对所提控制方法进行了验证.

Fuzzy Decision Method Applied in Action of Reactive Power Compensation Devices in Wind System

Frequent occurrence of large-scale cascading trip-off of wind turbine raises the concern about the decision process of ordered control of reactive power compensation devices. The theory of fuzzy multi-attribute decision making is adopted to ascertain the action sequence of reactive power compensation devices. First, a set of evaluation indexes including control sensitivity, regulation margin, response time, response level and cost is set up, and fuzziness of the proposed qualitative indexes is introduced to make them comparable to the proposed quantitative indexes. Then a method to calculate fuzzy weight of each index is put forward for evaluating relative importance of the proposed indexes. Finally, the action sequence of reactive power compensation devices is determined through the theory of fuzzy compromise decision making. The case study shows that the proposed method is effective to obtain the action sequence of reactive power compensation device which correspond to experience.

Regulation of the Excitation Reactive Power of the Asynchronous Wind Turbine at Variable Speed

This work focuses, initially, on modeling and simulating an isolated wind system in MATLAB/SIMULINK. And in the second part, it presents the simulation results of the wind system to start unloading and in resistive load, and the third part will discuss the strategy for adjusting the output voltage of the wind system to connect it to a rural operating load. The results show that in a dynamic environment where the wind speed and the load, changes abruptly, the voltage of the output is controlled at the desired value.

Steady-state voltage-control method considering large-scale wind-power transmission using half-wavelength transmission lines

Half-wavelength transmission can transmit large-scale renewable energy over very long distances.This paper proposes an improved steady-state voltage-control method for half-wavelength transmission systems considering largescale wind-power transmission.First,the unique voltage characteristics of half-wavelength lines are deduced based on the distributed parameter model.In the secondary voltage-control level,reactive power-transmission limits of half-wavelength lines are introduced as another control objective except for tracing the pilot bus voltage reference.Considering the uncertainty and fluctuation of wind power,the overvoltage risk-assessment method of half-wavelength lines is presented to determine specific voltage-control strategies.Simulation results demonstrate that the proposed voltage-control method delivers superior tracking performance according to a voltage reference value and prevents the overvoltage risk of halfwavelength lines effectively in different wind-power penetrations.

Neuro-Fuzzy Based Interline Power Flow Controller for Real Time Power Flow Control in Multiline Power System

This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.

含电动汽车和光伏的配电网演化动态博弈调度策略

针对大规模电动汽车的无序充电行为可能导致电网出现的三相不平衡问题,基于演化动态博弈模型,提出一种考虑三相负荷平衡和光伏消纳的电动汽车充电调度策略。首先,基于电动汽车接入时段的主观性以及光伏出力和负荷的不确定性,引入游牧集群和定居集群之间的演化动态博弈方程;然后,考虑用户侧和电网侧双方利益关系,设计以最小化电动汽车充电费用、三相负荷不平衡度和无功需求为目标的调度优化模型;最后,通过对某商业区配电网算例进行仿真求解,对比分析三相有功曲线、三相无功曲线以及荷电状态曲线的变化趋势。算例结果表明,该调度策略可有效降低三相不平衡度,满足无功补偿的需求以及改善用户充电成本。

考虑模糊多目标优化的风电场无功电压分区控制

为提升双馈风电场的无功功率补偿和电压稳定能力,提出了一种考虑模糊多目标优化的风电场无功电压分区控制方法。基于有功功率数据对风电场进行分区降维,并计算获得了各分区的无功优化限值;定义了分区无功裕度指标用以描述风电场电压运行的安全裕度,综合考虑运行安全性和稳定性,建立了风电场无功电压的模糊多目标优化模型;提出了一种可大范围全局快速寻优的自适应遗传禁忌算法,通过重新定义交叉与变异概率提升了寻优的全局时效性,通过引入禁忌算法改善了寻优准确性。最后,以某双馈风电场为例进行了仿真验证。结果表明:所提方法能够为风电场预留充足的无功裕度,显著降低系统内部的电压波动。

基于数据驱动的配电网无功优化

传统无功电压控制由于分布式电源、储能以及柔性负荷的接入面临计算速度和精度上的挑战。该文提出了一种基于数据驱动的配电网无功电压优化方法,通过跟踪实际系统的运行参数,实现无功电压的主动控制。在极限学习机中引入自动编码器构建深度学习机制,利用自动编码器建立极限学习机输入-输出的直接耦合关系,实现无监督学习和有监督学习有机结合,缩短训练模型的迭代过程;利用蒙特卡洛法基于分布式电源、负荷预测信息构建配电网运行场景,利用深度极限学习机挖掘运行场景优化运行与无功调压设备状态间的内在联系,建立电网运行场景与系统无功调压策略的映射关系。该文提出的基于数据驱动的无功优化方法不依赖实际系统潮流计算,能够实现配电网运行状态的跟踪和无功调节设备的优化调度,为配电网无功电压的主动控制打下基础。

基于模糊理论的输电网络电压无功控制策略

为解决新能源、电动汽车、储能等新技术应用下,高复杂度电力系统电压稳定控制问题,提出了一种基于模糊理论的输电网络电压无功控制策略。该方法引入模糊理论中的隶属度函数,根据系统节点与不同分区之间的耦合程度制定无功控制策略。根据灵敏度计算网络各个节点之间的电气距离,通过模糊聚类算法对节点进行初步分区,并采用聚类融合算法对聚类产生的多个结果进行融合,从而得到最终分区结果。根据关键节点对各个分区的隶属度制定主辅控制策略。IEEE30节点输电网络的算例分析表明,该控制策略可以有效实现对无功功率的控制。

锌冶炼电网中谐波治理及应用

随着电力技术的发展,电能成为我们生活、工业中必不可少的能源之一,锌冶炼生产系统中,由于工业生产中整流设备、变频设备、电子装置、电葫芦等设备的使用,产生大量的高次谐波,使得电网系统电能质量下降,所以对电网中谐波的治理迫在眉睫,本文通过锌冶炼系统电网运行的实际情况分析谐波的来源和治理的方案。

考虑电压-无功调节的台区互联装置规划方法

伴随分布式能源广泛接入低压配电网,其对配电网运行灵活性和消纳能力的要求不断提高。利用低压柔性互联装置将独立运行的低压配电台区分区互联,避免传统电压调节和无功补偿装置频繁动作。考虑到柔性互联装置造价昂贵,协同传统电压-无功调节装置,文中提出低压柔性互联装置的选址定容规划方法。首先,分析低压柔性互联装置拓扑和运行方式,建立其潮流模型。其次,建立低压柔性互联装置优化配置的双层规划模型,上层规划以年综合费用最小为目标,下层规划考虑电压-无功协调控制时间序列模型,以运行成本和电压偏差最小为目标,基于粒子群优化算法和混合整数二阶锥规划算法交替求解,得出配电系统最优柔性互联方案和最优运行方式。最后,在IEEE 33节点系统上进行实例分析,验证该双层规划算法的有效性。结果表明,所提方法能有效减少柔性互联装置的过度布置,同时减少由分布式能源频繁波动造成的运行成本。将模型凸化并线性化的方法明显提高了求解效率。

基于桨距角控制的永磁风电机组高电压穿越控制策略

为解决传统永磁风电机组高电压穿越控制策略存在超速脱网风险问题,提出一种基于桨距角控制的高电压穿越控制策略。高电压穿越期间,首先,按照并网要求向电网提供无功支撑;其次,考虑转子转速限制,当转子转速达到参考值时启动桨距角控制,抑制转子转速上升;最后,通过仿真试验,验证了所提控制策略的有效性。基于桨距角控制的永磁风电机组高电压穿越控制策略,既能向电网提供无功支撑,又能避免超速脱网。

基于“先无功–后有功”功率补偿的配电网电压协同控制策略

整县分布式光伏电源的大量开发与利用及分布式电源规模化并网对实现“碳达峰、碳中和”与“乡村振兴”两大国家战略具有重要的现实意义。由于分布式电源发电尖峰和低谷阶段与负荷峰谷时常不同步,进而导致配电系统过/欠电压问题,严重影响了电能质量,甚至威胁系统安全。针对上述问题,本文提出一种基于“先无功–后有功”功率补偿的配电网层级式电压协同控制策略。首先,建立基于“先无功–后有功”功率补偿的配电网层级式电压协同控制框架。其次,结合多微电网节点注入电流与电压的方程与功率–电压灵敏度分析,根据多节点电压越限程度,提出一种基于“先无功–后有功”功率补偿的多智能体协同调节策略,该策略先通过无功补偿器进行无功调节,当电压尚未得到有效治理时,再采用多微电网进行有功调节。再次,为了进一步满足各节点微电网有功功率调节需求,并考虑电网内部源–荷–储运行成本与污染排放,提出一种基于多目标优化的微电网内部分布式源–荷–储优化协调功率控制策略。最后,在MATLAB平台中设计了3种仿真场景以及IEEE测试系统模型对所提控制策略进行了验证。结果表明,所提出的电压协同控制方法在最经济的情况下可以实现各节点电压的综合高效治理,同时,所提出的微电网优化协调功率控制策略能使源–荷–储在绿色经济的供电模式下实时精准地满足电压治理目标下微电网有功调节的需求。仿真实验结果验证了本文所提控制策略的有效性。