A novel full-digital integrator has been developed for the magnetic diagnostics in HL-2A. Based on the pipeline processing of the field-programmable gate array and high-speed PCI extensions for instrumentation platfor...A novel full-digital integrator has been developed for the magnetic diagnostics in HL-2A. Based on the pipeline processing of the field-programmable gate array and high-speed PCI extensions for instrumentation platform, the digital integrator has realized octal-channel10-k Hz real-time integration and data transmission. In order to reduce the integration drift, a 24-bit analog-todigital converter and simple analog processing circuits are applied for high-precision sampling, while certain correction algorithms are used to minimize the drift. With simple and highly integrated circuits and high-performance digital processor, the digital integrator is of high stability and functional expansibility which greatly simplifies the operation procedure. The digital integrator has been tested in the plasma discharge experiments, and the experimental results have confirmed that the drift performance and accuracy of the digital integrator could fully meet the requirements of HL-2A.展开更多
A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculat...A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculating speed and complete peripheral equipments, is very suitable to work as the controller of the digital power supply. The micro C/OS- Ⅱ transplanted in ARM, helps to improve the respondent speed against various welding signals, as well as the reliability of the controlling software. The welding process consists of nine tasks. The tasks of great significance on reliability of the welder, for example, the A/D conversion of current and voltage, enjoy top priority. To avoid simultaneous-sharing on A/D converter and LCD module, two semaphores are introduced in to ensure the smooth performance of the welding power supply. Proven by experiments ,the ARM and the micro C/OS- Ⅱ can greatly improve both the respondent speed and the reliability of the digital welder.展开更多
A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer syste...A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.展开更多
Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studi...Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.展开更多
提出了基于实时数字仿真器(real time digital simulator,RTDS)的电磁–机电暂态混合实时仿真方法。在RTDS/CBuilder环境下,采用多线程和双链表稀疏矩阵技术开发了实时机电暂态仿真程序。提出了电磁和机电侧接口等值电路模型,并将RTDS...提出了基于实时数字仿真器(real time digital simulator,RTDS)的电磁–机电暂态混合实时仿真方法。在RTDS/CBuilder环境下,采用多线程和双链表稀疏矩阵技术开发了实时机电暂态仿真程序。提出了电磁和机电侧接口等值电路模型,并将RTDS电磁模型与实时机电暂态程序进行了连接,建立了混合实时仿真平台。该平台可以在详细分析含直流输电局部电网的同时,又能较准确地考虑交流系统对暂态稳定的影响。仿真算例证明了所提混合实时仿真方法的正确性。展开更多
作为清洁的可再生能源,太阳能光伏发电已成为国内可再生能源发展战略的重要内容。运用数字物理混合的硬件在环仿真方法对光伏并网系统的特性进行研究,能够提供便捷的实验条件和准确的实验结果。基于RTDS(Real Time Digital Simulator)...作为清洁的可再生能源,太阳能光伏发电已成为国内可再生能源发展战略的重要内容。运用数字物理混合的硬件在环仿真方法对光伏并网系统的特性进行研究,能够提供便捷的实验条件和准确的实验结果。基于RTDS(Real Time Digital Simulator)实时仿真系统,通过其数模接口同外部DSP构成数字物理闭环,设计了一种光伏并网系统的硬件在环仿真平台,建立了容量为520 kWp的光伏并网系统,实现了最大功率跟踪和并网控制的功能。最后对RTDS系统内的闭环仿真结果进行了分析,验证了所提出的数模混合硬件在环实时仿真方法的可行性和有效性。展开更多
基于实时数字仿真器(real time digital simulator,RTDS)搭建了仿真模型,并将RTDS与实际直流输电控制及保护装置连接,建立了交直流混合系统实时仿真实验平台。在此基础上,针对"1.15"高肇直流极2闭锁事故进行了仿真研究,成功...基于实时数字仿真器(real time digital simulator,RTDS)搭建了仿真模型,并将RTDS与实际直流输电控制及保护装置连接,建立了交直流混合系统实时仿真实验平台。在此基础上,针对"1.15"高肇直流极2闭锁事故进行了仿真研究,成功地再现了实际故障过程,并分析了事故发生的真正原因:直流极控装置误将瞬时故障检测为永久故障,终止直流线路重启;并提出了合理的改进措施:修改极控装置中接地检测故障装置和直流线路重启去游离时间。展开更多
基金supported by National Natural Science Foundation of China(No.11375195)National Magnetic Confinement Fusion Energy Development Research(No.2013GB104003)
文摘A novel full-digital integrator has been developed for the magnetic diagnostics in HL-2A. Based on the pipeline processing of the field-programmable gate array and high-speed PCI extensions for instrumentation platform, the digital integrator has realized octal-channel10-k Hz real-time integration and data transmission. In order to reduce the integration drift, a 24-bit analog-todigital converter and simple analog processing circuits are applied for high-precision sampling, while certain correction algorithms are used to minimize the drift. With simple and highly integrated circuits and high-performance digital processor, the digital integrator is of high stability and functional expansibility which greatly simplifies the operation procedure. The digital integrator has been tested in the plasma discharge experiments, and the experimental results have confirmed that the drift performance and accuracy of the digital integrator could fully meet the requirements of HL-2A.
基金Supported by the National Natural Science Foundation of China under Grant No 50575074by the Scientific and TechnologicalProject of Guangdong Province, China, under Grant No 2003A1040310
文摘A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculating speed and complete peripheral equipments, is very suitable to work as the controller of the digital power supply. The micro C/OS- Ⅱ transplanted in ARM, helps to improve the respondent speed against various welding signals, as well as the reliability of the controlling software. The welding process consists of nine tasks. The tasks of great significance on reliability of the welder, for example, the A/D conversion of current and voltage, enjoy top priority. To avoid simultaneous-sharing on A/D converter and LCD module, two semaphores are introduced in to ensure the smooth performance of the welding power supply. Proven by experiments ,the ARM and the micro C/OS- Ⅱ can greatly improve both the respondent speed and the reliability of the digital welder.
文摘A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.
文摘Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.
文摘提出了基于实时数字仿真器(real time digital simulator,RTDS)的电磁–机电暂态混合实时仿真方法。在RTDS/CBuilder环境下,采用多线程和双链表稀疏矩阵技术开发了实时机电暂态仿真程序。提出了电磁和机电侧接口等值电路模型,并将RTDS电磁模型与实时机电暂态程序进行了连接,建立了混合实时仿真平台。该平台可以在详细分析含直流输电局部电网的同时,又能较准确地考虑交流系统对暂态稳定的影响。仿真算例证明了所提混合实时仿真方法的正确性。
文摘作为清洁的可再生能源,太阳能光伏发电已成为国内可再生能源发展战略的重要内容。运用数字物理混合的硬件在环仿真方法对光伏并网系统的特性进行研究,能够提供便捷的实验条件和准确的实验结果。基于RTDS(Real Time Digital Simulator)实时仿真系统,通过其数模接口同外部DSP构成数字物理闭环,设计了一种光伏并网系统的硬件在环仿真平台,建立了容量为520 kWp的光伏并网系统,实现了最大功率跟踪和并网控制的功能。最后对RTDS系统内的闭环仿真结果进行了分析,验证了所提出的数模混合硬件在环实时仿真方法的可行性和有效性。
文摘基于实时数字仿真器(real time digital simulator,RTDS)搭建了仿真模型,并将RTDS与实际直流输电控制及保护装置连接,建立了交直流混合系统实时仿真实验平台。在此基础上,针对"1.15"高肇直流极2闭锁事故进行了仿真研究,成功地再现了实际故障过程,并分析了事故发生的真正原因:直流极控装置误将瞬时故障检测为永久故障,终止直流线路重启;并提出了合理的改进措施:修改极控装置中接地检测故障装置和直流线路重启去游离时间。
