A multi-sensor-based distributed real-time measurement system for glacier deformation

Glacier disasters occur frequently in alpine regions around the world,but the current conventional geological disaster measurement technology cannot be directly used for glacier disaster measurement.Hence,in this study,a distributed multi-sensor measurement system for glacier deformation was established by integrating piezoelectric sensing,coded sensing,attitude sensing technology and wireless communication technology.The traditional Modbus protocol was optimized to solve the problem of data identification confusion of different acquisition nodes.Through indoor wireless transmission,adaptive performance analysis,error measurement experiment and landslide simulation experiment,the performance of the measurement system was analyzed and evaluated.Using unmanned aerial vehicle technology,the reliability and effectiveness of the measurement system were verified on the site of Galongla glacier in southeastern Tibet,China.The results show that the mean absolute percentage errors were only 1.13%and 2.09%for the displacement and temperature,respectively.The distributed glacier deformation real-time measurement system provides a new means for the assessment of the development process of glacier disasters and disaster prevention and mitigation.

Novel Distance Measures on Hesitant Fuzzy Sets Based on Equal-Probability Transformation and Their Application in Decision Making on Intersection Traffic Control

The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special way.Firstly,a probability density function is assigned for any given HFE.Thereafter,equal-probability transformation is introduced to transform HFEs with different cardinal numbers on the condition into the same probability density function.The characteristic of this transformation is that the higher the consistency of the membership degrees in HFEs,the higher the credibility of the mentioned membership degrees is,then,the bigger the probability density values for them are.According to this transformation technique,a set of novel distance measures on HFSs is provided.Finally,an illustrative example of intersection traffic control is introduced to show the usefulness of the given distance measures.The example also shows that this study is a good complement to operation theories on HFSs.

Review of low timing jitter mode-locked fiber lasers and applications in dual-comb absolute distance measurement

Passively mode-locked fiber lasers emit femtosecond pulse trains with excellent short-term stability. The quantum-limited timing jitter of a free running femtosecond erbium-doped fiber laser working at room temperature is considerably below one femtosecond at high Fourier frequency. The ultrashort pulse train with ultralow timing jitter enables absolute time-of-flight measurements based on a dual-comb implementation, which is typically composed of a pair of optical frequency combs generated by femtosecond lasers. Dead-zone-free absolute distance measurement with sub-micrometer precision and kHz update rate has been routinely achieved with a dual-comb configuration, which is promising for a number of precision manufacturing applications, from large step-structure measurements prevalent in microelectronic profilometry to three coordinate measurements in large-scale aerospace manufacturing and shipbuilding. In this paper, we first review the sub-femtosecond precision timing jitter characterization methods and approaches for ultralow timing jitter mode-locked fiber laser design. Then, we provide an overview of the state-of-the-art dual-comb absolute ranging technology in terms of working principles, experimental implementations, and measurement precisions. Finally, we discuss the impact of quantum-limited timing jitter on the dual-comb ranging precision at a high update rate. The route to highprecision dual-comb range finder design based on ultralow jitter femtosecond fiber lasers is proposed.

Real-time reliability evaluation based on damaged measurement degradation data

A method was proposed to evaluate the real-time reliability for a single product based on damaged measurement degradation data.Most researches on degradation analysis often assumed that the measurement process did not have any impact on the product's performance.However,in some cases,the measurement process may exert extra stress on products being measured.To obtain trustful results in such a situation,a new degradation model was derived.Then,by fusing the prior information of product and its own on-line degradation data,the real-time reliability was evaluated on the basis of Bayesian formula.To make the proposed method more practical,a procedure based on expectation maximization (EM) algorithm was presented to estimate the unknown parameters.Finally,the performance of the proposed method was illustrated by a simulation study.The results show that ignoring the influence of the damaged measurement process can lead to biased evaluation results,if the damaged measurement process is involved.

Distance Measurement Model Based on RSSI in WSN

The relationship between RSSI (Received Signal Strength Indication) values and distance is the foundation and the key of ranging and positioning technologies in wireless sensor networks. Log-normal shadowing model (LNSM), as a more general signal propagation model, can better describe the relationship between the RSSI value and distance, but the parameter of variance in LNSM is depended on experiences without self-adaptability. In this paper, it is found that the variance of RSSI value changes along with distance regu- larly by analyzing a large number of experimental data. Based on the result of analysis, we proposed the relationship function of the variance of RSSI and distance, and established the log-normal shadowing model with dynamic variance (LNSM-DV). At the same time, the method of least squares(LS) was selected to es- timate the coefficients in that model, thus LNSM-DV might be adjusted dynamically according to the change of environment and be self-adaptable. The experimental results show that LNSM-DV can further reduce er- ror, and have strong self-adaptability to various environments compared with the LNSM.

On Similarity Measures and Distance Measures of Fuzzy Soft Sets

In this paper we introduce several new similarity measures and distance measures between fuzzy soft sets, these measures are examined based on the set-theoretic approach and the matching function. Comparative studies of these measures are derived. By introducing two general formulas, we propose a new method to define the similarity measures and the distance measures between two fuzzy soft sets with different parameter sets.

A novel algorithm for distance measurement using stereo camera

Distance estimation can be achieved by using active sensors or with the help of passive sensors such as cameras.The stereo vision system is generally composed of two cameras to mimic the human binocular vision.In this paper,a Python-based algorithm is pro-posed to find the parameters of each camera,rectify the images,create the disparity maps and finally use these maps for distance measurements.Experiments using real-time im-ages,which were captured from our stereo vision system,of different obstacles posi-tioned at multiple distances(60-200 cm)prove the effectiveness of the proposed program and show that the calculated distance to the obstacle is relatively accurate.The accuracy of distance measurement is up to 99.83%.The processing time needed to calculate the distance between the obstacle and the cameras is less than 0.355 s.

Multi-Criteria Decision Making Based on Bipolar Picture Fuzzy Operators and New Distance Measures

This paper aims to introduce the novel concept of the bipolar picture fuzzy set(BPFS)as a hybrid structure of bipolar fuzzy set(BFS)and picture fuzzy set(PFS).BPFS is a new kind of fuzzy sets to deal with bipolarity(both positive and negative aspects)to each membership degree(belonging-ness),neutral membership(not decided),and non-membership degree(refusal).In this article,some basic properties of bipolar picture fuzzy sets(BPFSs)and their fundamental operations are introduced.The score function,accuracy function and certainty function are suggested to discuss the comparability of bipolar picture fuzzy numbers(BPFNs).Additionally,the concept of new distance measures of BPFSs is presented to discuss geometrical properties of BPFSs.In the context of BPFSs,certain aggregation operators(AOs)named as“bipolar picture fuzzy weighted geometric(BPFWG)operator,bipolar picture fuzzy ordered weighted geometric(BPFOWG)operator and bipolar picture fuzzy hybrid geometric(BPFHG)operator”are defined for information aggregation of BPFNs.Based on the proposed AOs,a new multicriteria decision-making(MCDM)approach is proposed to address uncertain real-life situations.Finally,a practical application of proposed methodology is also illustrated to discuss its feasibility and applicability.

Micro-failure process and failure mechanism of brittle rock under uniaxial compression using continuous real-time wave velocity measurement

In this study,the micro-failure process and failure mechanism of a typical brittle rock under uniaxial compression are investigated via continuous real-time measurement of wave velocities.The experimental results indicate that the evolutions of wave velocities became progressively anisotropic under uniaxial loading due to the direction-dependent development of micro-damage.A wave velocity model considering the inner anisotropic crack evolution is proposed to accurately describe the variations of wave velocities during uniaxial compression testing.Based on which,the effective elastic parameters are inferred by a transverse isotropic constitutive model,and the evolutions of the crack density are inversed using a self-consistent damage model.It is found that the propagation of axial cracks dominates the failure process of brittle rock under uniaxial loading and oblique shear cracks develop with the appearance of macrocrack.

Fuzzy Regression Model Based on Fuzzy Distance Measure

Some existed fuzzy regression methods have some special requirements for the object of study, such as assuming the observed values as symmetric triangular fuzzy numbers or imposing a non-negative constraint of regression parameters. In this paper, we propose a left-right fuzzy regression method, which is applicable to various forms of observed values. We present a fuzzy distance and partial order between two left-right (LR) fuzzy numbers and we let the mean fuzzy distance between the observed and estimated values as the mean fuzzy error, then make the mean fuzzy error minimum to get the regression parameter. We adopt two criteria involving mean fuzzy error (comparative mean fuzzy error based on partial order) and SSE to compare the performance of our proposed method with other methods. Finally four different types of numerical examples are given to illustrate that our proposed method has feasibility and wide applicability.

Real-time forward modeling and inversion of logging-while-drilling electromagnetic measurements in horizontal wells

Based on the pseudo-analytical equation of electromagnetic log for layered formation,an optimal boundary match method is proposed to adaptively truncate the encountered formation structures.An efficient integral method is put forward to significantly accelerate the convergence of Sommerfeld integral.By asymptotically approximating and subtracting the first reflection/transmission waves from the scattered field,the new Sommerfeld integral method has addressed difficulties encountered by the traditional digital filtering method,such as low computational precision and limited operating range,and realized the acceleration of the computation speed of logging-while-drilling electromagnetic measurements(LWD EM).By making use of the priori information from the offset/pilot wells and interactively adjusting the formation model,the optimum initial guesses of the inversion model is determined in order to predict the nearby formation boundaries.The gradient optimization algorithm is developed and an interactive inversion system for the LWD EM data from the horizontal wells is established.The inverted results of field data demonstrated that the real-time interactive inversion method is capable of providing the accurate boundaries of layers around the wellbore from the LWD EM,and it will benefit the wellbore trajectory optimization and reservoir interpretation.

Real-Time Black Carbon Emissions from Light-Duty Passenger Vehicles Using a Portable Emissions Measurement System

Black carbon(BC)is considered the second largest anthropogenic climate forcer,but the radiative effects of BC are highly correlated with its combustion sources.On-road vehicles are an important source of anthropogenic BC.However,there are major uncertainties in the estimates of the BC emissions from on-road light-duty passenger vehicles(LDPVs),and results obtained with the portable emissions measurement system(PEMS)method are particularly lacking.We developed a PEMS platform and evaluated the on-road BC emissions from ten in-use LDPVs.We demonstrated that the BC emission factors(EFs)of gasoline direction injection(GDI)engine vehicles range from 1.10 to 1.56 mg.km^(-1),which are higher than the EFs of port fuel injection(PFI)engine vehicles(0.10–0.17 mg.km^(-1))by a factor of 11.The BC emissions during the cold-start phase contributed 2%–33%to the total emissions.A strong correlation(R^(2)=0.70)was observed between the relative BC EFs and average vehicle speed,indicating that traffic congestion alleviation could effectively mitigate BC emissions.Moreover,BC and particle number(PN)emissions were linearly correlated(R^(2)=0.90),and compared to PFI engine vehicles,the instantaneous PN-to-BC emission rates of GDI engine vehicles were less sensitive to vehicle specific power-to-velocity(VSPV)increase in all speed ranges.

Designing similarity measurement with distance measure and application on laterally directional mode flight test

Similarity measure construction has been proposed as fault detection of flight test method in order to obtain the primary control surface stuck and the combination stuck of primary control.Similarity measures were obtained through analyzing the certainty and uncertainty of fuzzy membership functions,which were designed based on well-known Hamming distance.It was applied to the fault detection of primary control surface stuck of uninhabited aerial vehicle(UAV).At post-failure control surface,if the UAV is controllable and trimmable using other control surfaces,the UAV is able to fly or return to the safety region through reconfiguration of flight control system.To detect the fault,similarity measure computations were carried out.This result could be applicable with the real-time parameter estimation method.By monitoring the value of coefficients due to the control surface deviation,it becomes aware that the control surface fault occurs or not.The control surface stuck position and value were separated by comparing the trim value with the reference value.This is the advantage of increasing in reliability without adding sensors or with additional low cost.

Information fusion of train speed and distance measurements based on fuzzy adaptive Kalman filter algorithm

The measurement accuracy of speed and distance in high speed train directly affects the control precision and driving efficiency of train control system. To improve the capability of train self control, a combined speed measurement and positioning method based on speed sensor and radar which is assisted by global positioning system（GPS） is proposed to improve the accuracy of measurement and reduce the dependence on the ground equipment. In consideration of the fact that the filtering precision of Kalman filter will decrease when the statistical characteristics are changing, this paper uses fuzzy comprehensive evaluation method to evaluate the sub filter, and information distribution coefficients are dynamically adjusted according to filtering reliability, which can improve the fusion accuracy and fault tolerance of the system. The sub filter is required to carry on the covariance shaping adaptive filtering when it is in the suboptimal state. The adjustment factor of error covariance is obtained according to the minimized cost function, which can improve the matching degree between the measured residual variance and the system recursive residual. The simulation results show that the improved filter algorithm can track the changes of the system effectively, enhance the filtering accuracy significantly, and improve the measurement accuracies of train speed and distance.

Feature Selection Based on Distance Measurement

Every day we receive a large amount of information through different social media and software,and this data and information can be realized with the advent of data mining methods.In the process of data mining,to solve some high-dimensional problems,feature selection is carried out in limited training samples,and effective features are selected.This paper focuses on two Relief feature selection algorithms:Relief and ReliefF algorithm.The differences between them and their respective applicable scopes are analyzed.Based on Relief algorithm,the high weight feature subset is obtained,and the correlation between features is calculated according to the mutual information distance measure,and the high redundant features are removed to obtain the feature subset with higher quality.Experimental results on six datasets show the effectiveness of our method.

Optimization of measurement distance of (109)~Cd K XRF system for obese subjects

The precision of results obtained from the ^109Cd K XRF in vivo measurement system of bone lead for obses subjects with high BMI( body mass index)was poor.The main factor affecting the precision was the distance between tibia and detector.Compared with the standard phantom,a large phantom was used to simulate the obese subject in the measurements at different distances to the detector.The counts of Compton scattering increased highly because of the tissue overlying and surrounding tibia of the obese subject.When the distance between leg and detector was too small,the instrument would produce the distorted X-ray spectra,so that the obtained data were inaccurate,In order to ensure good measuremtn precision and accuracy,the distance between leg and detector should be maintained at 25mm during the counting period.Meanwhile,the dead time displayed instantly on the instrument should be controlled to around 30%.

Induced and heavy aggregation operators with distance measures

This paper introduces a new aggregation model by using induced and heavy aggregation operators in distances measures such as the Hamming distance.It is called the induced heavy ordered weighted averaging（OWA） distance（IHOWAD） operator.This paper studies some of its main properties and a wide range of particular cases such as the induced heavy OWA（IHOWA） operator,the induced OWA distance（IOWAD） operator and the heavy OWA distance（HOWAD） operator.This approach is generalized by using generalized and quasi-arithmetic means obtaining the induced generalized IHOWAD（IGHOWAD） operator and the Quasi-IHOWAD operator.An application of the new approach in a decision making problem regarding the selection of strategies is developed.

On the Probable Cause of the Discrepancies between Hipparcos and VLBI Pleiades Distance Measurements

It will show, a recent extension of special relativity on the grounds of a novel concept of velocity, which also predicts the speed of transversal motions on the plane of the sky to increase with enduring observation time, to fully explain the differences of the observational results of the former experiments referring to the distance of the Pleiades from Earth.

Criterions and Measures of Route Selection of Shallowly Embedded Long-Distance Oil and Gas Pipeline in Mountain Areas

According to the engineering investigation of long-distance oil and gas pipelines, the criterions and measures of route selection are drawn as follows： the flat landform is the first choice in route alignment. The foot of mountain is the first choice when the route passes by the valley. The route should pass by but the shady and deposited slope and not in sunny and erosive slope as possible as it can. The pipeline should be vertical to contour climbing and descending the mountain except steep slope. Tunnel can be used in crossing foothill. Perpendicularly traversing the river is better than beveling; the worst choice is to put the pipeline along the river. Bypass is the best choice in karsts area. The order of route selection should be pre-choosing, investigation, optimization and adjustment.

Target Detection Improvement in Distance Measurement System Using Two Rotatable Cameras for FPSO

This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading （FPSO） facilities. The authors have developed a distance measurement system that consists of two rotatable cameras on a ship and a target on a wharf for the automatic berthing of ships. This system measures a distance by detecting and tracking the target on the wharf using the two rotatable cameras on the ship. Our goal is to apply this distance measurement system to an automatic relative positioning system for a ship at an FPSO facility. In this application, the shape of the target in the images captured by the cameras is deformed by their relative positions and attitudes, which increases the measurement errors. To solve this problem, we propose a target detection method that improves the target deformations. The proposed target detection method is able to detect the deformed targets using a target database that is created by image conversion with the perspective projection of a reference target. By using the proposed target detection method, the distance measurement error is decreased. Experimental results on a miniature scale and in an indoor environment confirmed that the measurement error of the relative distance is decreased by using the proposed target detection method.