Relative orbit determination algorithm of space targets with passive observation

Angles-only relative orbit determination for space non-cooperative targets based on passive sensor is subject to weakly observable problem of the relative state between two spacecraft. Previously, the evidence for angles-only observability was found by using cylindrical dynamics, however, the solution of orbit determination is still not provided. This study develops a relative orbit determination algorithm with the cylindrical dynamics based on differential evolution. Firstly, the relative motion dynamics and line-of-sight measurement model for nearcircular orbit are established in cylindrical coordinate system.Secondly, the observability is qualitatively analyzed by using the dynamics and measurement model where the unobservable geometry is found. Then, the angles-only relative orbit determination problem is modeled into an optimal searching frame and an improved differential evolution algorithm is introduced to solve the problem. Finally, the proposed algorithm is verified and tested by a set of numerical simulations in the context of highEarth and low-Earth cases. The results show that initial relative orbit determination(IROD) solution with an appropriate accuracy in a relative short span is achieved, which can be used to initialize the navigation filter.

TLE orbit determination using simplex method

Two-Line Element(TLE)datasets are the only orbital data source of Earth-orbiting space objects for many civil users for their research and applications.The datasets have uneven qualities that may affect the reliability of the propagated positions of space objects using a single TLE.The least squares approach to use multiple TLEs also suffers from the poor quality of some TLEs,and reliable error information cannot be available.This paper proposes a simplex algorithm to estimate an optimal TLE from multiple TLEs and obtain the uncertainty of each element.It is a derivative-free technique that can deal with various orbit types.Experiments have demonstrated that using the TLE estimated from the simplex method is more reliable,stable,and effective than those from the batch least squares method.As an application example,the optimal TLE and its uncertainty are used for predicting the fallen area,keeping the actual fallen site in the prediction areas.

Influence of higher-order ionospheric delay correction on GPS precise orbit determination and precise positioning

At present, Global Navigation Satellite Systems（GNSS） users usually eliminate the influence of ionospheric delay of the first order items by dual-frequency ionosphere-free combination. But there is still residual ionospheric delay error of higher order term. The influence of the higher-order ionospheric corrections on both GPS precision orbit determination and static Precise Point Positioning（PPP） are studied in this paper. The influence of higher-order corrections on GPS precision orbit determination, GPS observations and static PPP are analyzed by neglecting or considering the higher-order ionospheric corrections by using a globally distributed network which is composed of International GNSS Service（IGS） tracking stations. Numerical experimental results show that, the root mean square（RMS） in three dimensions of satellite orbit is 36.6 mme35.5 mm. The maximal second-order ionospheric correction is 9 cm, and the maximal third-order ionospheric correction is 1 cm. Higher-order corrections are influenced by latitude and station distribution. PPP is within 3 mm in the directions of east and up. Furthermore, the impact is mainly visible in the direction of north, showing a southward migration trend, especially at the lower latitudes where the influence value is likely to be bigger than 3 mm.

Impact Analysis of Solar Irradiance Change on Precision Orbit Determination of Navigation Satellites

Solar radiation pressure is the main driving force and error source for precision orbit determination of navigation satellites.It is proportional to the solar irradiance,which is the"sun constant".In regular calculation,the"solar constant"is regard as a constant.However,due to the existence of sunspots,flares,etc.,the solar constant is not fixed,the change in the year is about 1%.To investigate the variation of solar irradiance,we use interpolation and average segment modeling of total solar irradiance data of SORCE,establishing variance solar radiation pressure(VARSRP)model and average solar radiation pressure(AVESRP)model based on the built solar pressure model(SRPM)(constant model).According to observation data of global positioning system(GPS)and Beidou system(BDS)in 2015 and comparing the solar pressure acceleration of VARSRP,AVESRP and SRPM,the magnitude of change can reach 10-10 m/s^2.In addition,according to the satellite precise orbit determination,for GPS satellites,the results of VARSRP and AVESRP are slightly smaller than those of the SRPM model,and the improvement is between 0.1 to 0.5 mm.For geosynchronous orbit(GEO)satellites of BDS,The AVESRP and VARSRP have an improvement of 3.5 mm and 4.0 mm,respectively,based on overlapping arc,and SLR check results show the AVESRP model and the VARSRP model is improved by 2.3 mm and 3.5 mm,respectively.Moreover,the change of inclined geosynchronous orbit(IGSO)satellites and medium earth orbit(MEO)satellites is relatively small,and the improvement is smaller than 0.5 mm.

Orbit Determination Using Satellite-to-Satellite Tracking Data

Satellite-to-Satellite tricking (SST) data can be used to determine the orbits of spacecraft in two ways. One is combined orbit determination, which combines SST data with ground-based tracking data and exploits the enhanced tracking geometry. The other is the autonomous orbit determination, which uses only SST. The latter only fits some particular circumstances since it suffers the rank defect problem in other circumstances. The proof of this statement is presented. The nature of the problem is also investigated in order to find an effective solution. Several. methods of solution are discussed. The feasibility of the methods is demonstrated by their application to a simulation.

LDA-ID:An LDA-Based Framework for Real-Time Network Intrusion Detection

Network intrusion poses a severe threat to the Internet.However,existing intrusion detection models cannot effectively distinguish different intrusions with high-degree feature overlap.In addition,efficient real-time detection is an urgent problem.To address the two above problems,we propose a Latent Dirichlet Allocation topic model-based framework for real-time network Intrusion Detection(LDA-ID),consisting of static and online LDA-ID.The problem of feature overlap is transformed into static LDA-ID topic number optimization and topic selection.Thus,the detection is based on the latent topic features.To achieve efficient real-time detection,we design an online computing mode for static LDA-ID,in which a parameter iteration method based on momentum is proposed to balance the contribution of prior knowledge and new information.Furthermore,we design two matching mechanisms to accommodate the static and online LDA-ID,respectively.Experimental results on the public NSL-KDD and UNSW-NB15 datasets show that our framework gets higher accuracy than the others.

An Orbit Determination Using SGP4 Propagator and Doppler Shifts for CubeSats

The two line elements(TLEs),released by the North American Aerospace Defense Command(NORAD),are chosen for CubeSats' mission operators.Unfortunately,they have errors and other accompanied problems,which cause large deviations in the in-track component.When a TLE value is available at a certain epoch,the dominant error is the angular error.It is proposed to correct the angular error by solving-for the mean argument of latitude at the desired epoch.A batch least squares technique and range rate measurements are used for the correction process.With the assistance of satellite tool kit(STK)software and Matlab,a simulation to verify the orbit determination(OD)technique is implemented.This paper provides an angular correction low cost OD method and presents a complete analysis for various test cases.This approach maintains high accuracy in cross-track and radial and makes great improvement in in-track at the same time,but it is exclusive for circular orbits.When it is applied to an elliptical orbit,the error will be unacceptable.Therefore,the angular error is corrected using the longitude of periapsis which totally mitigates the error at the epoch under consideration.For inclinations less than 20 o,the mean longitude is preferred for the angular correction as it provides more accuracy compared with the mean argument of latitude.

Research on Autonomous Orbit Determination of Navigation Satellite Based on Crosslink Range and Orientation Parameters Constraining

Autonomous navigation of navigation satellite is di scussed. The method of auto-orbit determination using the crosslink range and o rientation parameters constraining is put forward. On the basis of the analysis of its feasibility, some useful conclusions are given.

Initial orbit determination of BDS-3 satellites based on new code signals

For the two newly launched satellites(PRN number 27 and 28) of the future global BeiDou navigation satellite system(BDS-3), there is no available broadcast ephemeris data and other initial orbit information, but the initial orbit is the fundamental of the comprehensive analysis of the satellites and their signals. Precise orbit determination(POD) also requires determination of a priori initial value with a certain precision in order to avoid problems such as filter divergence during POD. Compared with the Newton iteration method, which relies on the initial value, this study utilizes the Bancroft algorithm to directly solve the nonlinear equations with the advantage of numerical stability. The initial orbits of these two satellites are calculated based on new code signals, and their results are analyzed and discussed. The experimental results show that, with the exception of very few epochs, when the new code signal is utilized, the median and robust variance factor of the observed residuals computed using pseudo-range observations and the solved initial orbits are less than 4 and 2 m, respectively. It also shows that this solution can be used for rapid initial orbit recovery after maneuvers of the new BeiDou satellites.

High Precision Orbit Determination of CHAMP Satellite

The precision orbit determination of challenging minisatellite payload(CHAMP) satellite was done based on position and navigation data analyst(PANDA) software which is developed in Wuhan University, using the onboard GPS data of year 2002 from day 126 to 131. The orbit accuracy was assessed by analyzing the difference from GFZ post-processed science orbits (PSO), the GPS carrier and pseudo-range data residuals and the satellite laser ranging (SLR) residuals.

Precise Orbit Determination for the FY-3C Satellite Using Onboard BDS and GPS Observations from 2013, 2015, and 2017

Using the FengYun-3C(FY-3C)onboard BeiDou Navigation Satellite System(BDS)and Global Positioning System(GPS)data from 2013 to 2017,this study investigates the performance and contribution of BDS to precise orbit determination(POD)for a low-Earth orbit(LEO).The overlap comparison result indicates that code bias correction of BDS can improve the POD accuracy by 12.4%.The multi-year averaged one-dimensional(1D)root mean square(RMS)of the overlapping orbit differences(OODs)for the GPS-only solution is 2.0,1.7,and 1.5 cm,respectively,during the 2013,2015,and 2017 periods.The 1D RMS for the BDS-only solution is 150.9,115.0,and 47.4 cm,respectively,during the 2013,2015,and 2017 periods,which is much worse than the GPS-only solution due to the regional system of BDS and the few BDS channels of the FY-3C receiver.For the BDS and GPS combined solution(also known as the GC combined solution),the averaged 1D RMS is 2.5,2.3,and 1.6 cm,respectively,in 2013,2015,and 2017,while the GC combined POD presents a significant accuracy improvement after the exclusion of geostationary Earth orbit(GEO)satellites.The main reason for the improvement seen after this exclusion is the unfavorable satellite tracking geometry and poor orbit accuracy of GEO satellites.The accuracy of BDS-only and GC combined solutions have gradually improved from 2013 to 2017,thanks to improvements in the accuracy of International GNSS Service(IGS)orbit and clock products in recent years,especially the availability of a high-frequency satellite clock product(30 s sampling interval)since 2015.Moreover,the GC POD(without GEO)was able to achieve slightly better accuracy than the GPS-only POD in 2017,indicating that the fusion of BDS and GPS observations can improve the accuracy of LEO POD.GC combined POD can significantly improve the reliability of LEO POD,simply due to system redundancy.An increased contribution of BDS to LEO POD can be expected with the launch of more BDS satellites and with further improvements in the accuracy of BDS satellite products in the near future.

Reducing Influence of Gravity Model Error in Precise Orbit Determination of Low Earth Orbit Satellites

Based on the orbit integration and orbit fitting method, the influence of the characters of the gravity model, with different precisions, on the movement of low Earth orbit satellites was studied. The way and the effect of absorbing the influence of gravity model error on CHAMP and GRACE satellite orbits, using linear and periodical empirical acceleration models and the so-called "pseudo-stochastic pulses" model, were also analyzed.

Results and Analyses of BDS Precise Orbit Determination with the Enhancement of Fengyun-3C

Global navigation satellite system occultation sounder (GNOS) Fengyun-3C was launched successfully on September 23, 2013, which carried GPS/BDS receiver for the first time. This provides the convenience to study the enhancement results of low earth orbiter satellite (LEO) to BDS precise orbit determination (POD). First the data characteristic and code observation noise of GNOS are analyzed. Then the enhancement experiments in the case of global and regional ground observation stations layout are processed with four POD schemes: BDS single system, GPS/BDS double system, BDS single system with GNOS observations, GPS/BDS double system with GNOS observations. The precision of BDS orbits and clocks are compared via overlapping arcs. Results show that in the case of global station layout the along directional precision of GEO satellite has the biggest improvement, with the improvement percentage 60%. Then the precision of cross direction and the along direction of remaining satellites shows the second biggest improvement. The orbit precision of BDS-only POD in part of observation arcs some satellite even suffers a slight decline. The root mean square (RMS) of overlapping clock difference of visible arcs in GPS/BDS POD experiments improves by 0.1 ns level. As to the experiments of regional station layout with 7 ground stations, the orbit and clock overlapping precision and orbit predicting precision are analyzed. Results show that the predicting precision of BDS GEO satellites in the along direction improves by 85%. The remaining also has a substantial improvement, with the average percentage 21.7%. RMS of overlapping clock difference of visible arcs improves by 0.5 ns level.

Satellite Positioning and Orbit Determination System(SPODS):Introduction and Evaluation

The Satellite Positioning and Orbit Determination System(SPODS)is a software package for GNSS positioning/orbit determination,developed by the Xi’an Research Institute of Surveying and Mapping.So far it has been able to analyse GPS data and has the capability of high precision GPS positioning and orbit determination.The underlying theory and the performance evaluation are briefly addressed in this paper.The experiments are carried out with GPS data collected from about 127 IGS stations during 4~10 January 2009.The results show that the RMS 1D difference is 1.1 cm between SPODS orbits and final IGS combined orbits,and that the repeatability of daily solutions of station coordinates is 1.5 mm for horizontal components,and 4.5 mm for vertical component,and that the consistency of ERP solutions with IGS final products is 0.025 mas,0.093 mas and 0.013 ms/d respectively for pole coordinates and LOD.

Atmospheric Drag Perturbation in an Autonomous Orbit Determination for Satellite

In this paper, an autonomous orbit determination method for satellite using a large field of view star sensor is presented. The simulation of orbit under atmospheric drag perturbation are given with expanded Kalman filtering. The large field of view star sensor has the same precision as star sensor and a sufficient filed of view. Therefore ,the refraction stars can be observed more accurately in real time. The geometric relation between the refracted starlight and the earth can be determined by tangent altitude of the refraction starlight. And then the earth center can be determined in satellite body frame. The simulation shows that the precision of the mean square deviation of satellite’s position and velocity is 5m and 0.01m/s respectively. The calculated decrement of the semi-major axis in one day is close to the theoretical result, and the absolute error is in the range of decimeter when the altitude of orbit is 750 km. The simu- lateion of orbit of different initial semi-major axis shows that the higher the altitude of orbit is, the smaller the dec- rement of the semi-major axis is, and when the altitude of orbit is 1700 km the decimeter of the semi-major axis is 10-7 km.

CubeSat Autonomous Orbit Determination Based on Magnetometer and Sun Sensor Data

CubeSats have evolved from purely educational tools to a standard platform for technology demonstration,scientific instrumentation and application in less than a decade.They open the door to new challenges and interplanetary missions which lead to the direct realization of autonomous orbit determination(AOD)which has been investigated before with different integrated sensors combined with various filters.Mostly these studies were carried out for larger satellites with more accurate sensors.Magnetometer and sun sensor combined with extended Kalman filter(EKF)are chosen to complete AOD task considering their light weight.For the purpose of AOD and the computational cost requirements imposed on CubeSats,it is important to develop and apply low cost on-board models.In this perspective,a magnetic model based on a table look up is proposed to generate the reference magnetic field with a low computational burden.In current article the simulations through Matlab and Satellites Tool Kit(STK)especially focus on the accuracy of the AOD system provided by this model.For analysis three EKFs are carried out with different calculation models and data types.The system based on the proposed model is fully autonomous,low-cost and has moderate-accuracy required by most CubeSats missions.The AOD system can be applied as main or backup system depending on the space missions′demands.

Autonomous determination of orbit for probe around asteroids using unscented Kalman filter

The observed images of the asteroid and the asteroid reference images are used to obtain the probe-to-asteroid direction and the location of the limb features of the asteroid in the inertial coordinate. These informa-tion in combination with the shape model of the asteroid and attitude information of the probe are utilized to ob-tain the position of the probe. The position information is then input to the UKF which determines the real-timeorbit of the probe. Finally, the autonomous orbit determination algorithm is validated using digital simulation.The determination of orbit using UKF is compared with that using extended Kalman filter (EKF), and the resultshows that UKF is superior to EKF.

Autonomous orbit determination for the probe around small body

The algorithm of autonomous orbit determination for the probe around small body is studied. In the algorithm, first, the observed images of the body are compared with its pre-computed model of the body to obtain the location of the limb features of the body in the inertial coordinate. Second, the information of the images and features in utilized to obtain the position of the probe using the Levenberg-Marquardt algorithm. The position is then input to an extended Kalman filter which determines the real time orbit of the probe. Finally, considering the effective of the irregular small body shape perturbation and the small body model parameter error on the orbit determination precise, the procedure of autonomous orbit determination is validated using digital simulation.

Error Analysis of Orbit Determination for the Geostationary Satellite with Single Station Antenna Tracking Data

In the study, position and velocity values of a geostationary satellite are found. When performing this, a MATLAB algorithm is used for Runge-Kutta Fehlberg orbit integration method to solve spacecraft’s position and velocity. Integrated method is the solution for the systems which mainly work with a single station. Method provides calculation of azimuth, elevation and range data by using the position simulation results found by RKF. Errors of orbit determination are analysed. Variances of orbit parameters are chosen as the accuracy criteria. Analysis results are the indicator of the method’s

HOI延迟对LEO卫星简化动力学POD的影响

通常使用无电离层(IF)线性组合(LC)消除低地球轨道(LEO)卫星简化动力学精密定轨(POD)一阶电离层延迟误差,忽略了高阶电离层(HOI)延迟误差。随着LEO卫星POD技术的发展,计算不同轨道高度的HOI延迟并探索其变化已成为进一步提高POD精度的重要手段。首先,使用国际参考电离层-2016(IRI-2016)和国际地磁参考场第13代(IGRF-13)模型,计算电离层穿刺点(IPP)位置和地磁场强度。其次,使用平滑星载GNSS数据计算电离层斜路径总电子含量(STEC)。然后,分别计算GOCE、GRACE-A和SWARM-A/B卫星的二阶和三阶电离层延迟。最后,评估了HOI延迟对LEO卫星重叠轨道分析、卫星激光测距(SLR)检核和精密科学轨道(PSO)比较结果的影响。实验结果表明:HOI延迟对LEO卫星简化动力学POD的影响大约在毫米至厘米的数量级上;HOI延迟对LEO卫星简化动力学POD外符合精度的影响分别达到0.92,0.22,0.21和0.18 mm;随着LEO卫星轨道高度的增加,HOI延迟对LEO卫星简化动力学POD的影响减小。