Real-Time Wind Speed Analysis at Wind-Damaged Tower of a Transmission Line

Affected by the Super Typhoon“Mangkhut,”a total of five base towers of a transmission line in the mountainous area of China collapsed.In this paper,a mathematical model is established based on the Shuttle Radar Topography Mission(SRTM)data near the accident tower.The measured wind speed in the plain area under the mountain is used as the calculation boundary condition.The wind speed at the top of the mountain is calculated by using a numerical simulation method.The design wind speed and calculated wind speed at the tower site are compared,and the influence of wind speed on tower position in this wind disaster accident is analyzed.

Modeling and Statistical Properties Research on Online Real-Time Information Transmission Network

In this paper, the model of the online real-time information transmission network, such as wechat, micro-blog, and QQ network, is proposed and built, based on the connection properties between users of the online real-time information transmission network, and combined with the local world evolving characteristics in complex network, then the statistical topological properties of the network is obtained by numerical simulation. Furthermore, we simulated the process of information transmission on the network, according to the actual characteristics of the online real-time information transmission. Statistics show that the degree distribution presents the characteristics of scale free network, presenting power law distribution, while the average path length, the average clustering coefficient and the average size of the network also has a power-law relationship, moreover, the model parameters has no effect on power-law exponent. The spread of information on the network represents obvious fluctuation scaling, reflecting the characteristics that information transmission fluctuates over time.

Real-time performance of periodic data transmission in EPA industrial Ethernet

To evaluate and improve the real-time performance of Ethernet for plant automation（EPA） industrial Ethernet,the real-time performance of EPA periodic data transmission was theoretically and experimentally studied.By analyzing information transmission regularity and EPA deterministic scheduling mechanism,periodic messages were categorized as different modes according to their entering-queue time.The scheduling characteristics and delivery time of each mode and their interacting relations were studied,during which the models of real-time performance of periodic information transmission in EPA system were established.On this basis,an experimental platform is developed to test the delivery time of periodic messages transmission in EPA system.According to the analysis and the experiment,the main factors that limit the real-time performance of EPA periodic data transmission and the improvement methods were proposed.

Transmission Considerations with QoS Support to Deliver Real-Time Distributed Speech Recognition Applications

Distributed speech recognition (DSR) applications have certain QoS (Quality of service) requirements in terms of latency, packet loss rate, etc. To deliver quality guaranteed DSR application over wirelined or wireless links, some QoS mechanisms should be provided. We put forward a RTP/RSVP transmission scheme with DSR-specific payload and QoS parameters by modifying the present WAP protocol stack. The simulation result shows that this scheme will provide adequate network bandwidth to keep the real-time transport of DSR data over either wirelined or wireless channels.

Development of 16-channels Compact EEG System Using Real-time High-speed Wireless Transmission

For the convenience of people with disability and for normal people, a demand for intelligent interfaces is ever increasing and therefore related studies are actively being conducted. Recently a study is being conducted to develop an interface through face expression, movement of the body and eye movements, and further more active attempts to use electrical signals(brainwave, electrocardiogram, electromyogram) measured from the human body is also actively being progressed. In addition, the development and the usage of mobile devices and smart devices are promoting these research activities even more. The brainwave is measured by electrical activities between nerve cells in the cerebral cortex using scalp electrodes. The brainwave is mainly used for diagnosis and treatment of diseases such as epilepsy, encephalitis, brain tumors and brain damage. As a result, the brainwave measurement methods and analytical methods were developed. Interface using the brainwave will not go through language or body behavior which is the result of the information processed by the brain but will pass directly to the system providing a brain-computer interface (BCI). This is possible because a variety of the brainwave appears depending on the human’s physical and mental state. Using the brainwave with the intelligent brain-computer interface or combining it with mobile devices and smart devices, regardless of space constraints, the brainwave measurement should be possible.[4,7] In this study, in order to measure the brainwave without spatial constraint, 16 channel compact brainwave measurements system using a high-speed wireless communications were designed. It was designed with a 16 channel to classify the various brainwave patterns that appear and for estimating the location of the nerve cells that triggered the brainwave. And in order to transmit the brainwave data within the channel without loss, a high-speed wireless communication must be possible that can enable a high-speed wireless transmission more sufficient than the Bluetooth, therefore, 802.11 compliant Wi-Fi communication methods were used to transfer the data to the PC. In addition, by using an analog front-end IC having a single-chip configuration with real-time digital filters, the miniaturization of the system was implemented and in order to verify the system Eye-blocking was used to observe the changes in the EEG signal.

Development of TaqMan-based Real-time PCR Assay for Detecting Transmissible Gastroenteritis Virus and Its Application in Vaccine Evaluation

[Objective] This study aimed to establish a TaqMan-based real-time PCR assay for detecting transmissible gastroenteritis virus （TGEV）. [Method] Primers and a probe were designed according to the conserved sequence of N gene in TGEV genome. After gradient dilution, the recombinant plasmid harboring the N gene was used as a standard for real-time PCR assay to establish the standard curve. [Re- sult] The results showed that the established real-time PCR assay exhibited a good linear relationship within the range of 102-10^10 copies/ul; the correlation coefficient was above 0.99 and the amplification efficiency ranged from 90% to 110%. The de- tection limit of real-time PCR assay for TGEV was 10 copies/μl, suggesting a high sensitivity; there was no cross reaction with other porcine viruses, indicating a good specificity; coefficients of variation within and among batches were lower than 3%, suggesting a good repeatability. The established real-time PCR method could be ap- plied in quantitative analysis and evaluation of the immune efficacy of TGEV vac- cines and detection of TGEV in clinical samples. [Conclusion] The TaqMan-based real-time PCR assay established in this study is highly sensitive and specific, which can provide technical means for the epidemiological survey of TGEV, development of TGEV vaccines and investigation of the pathogenesis of TGE.

Design and implementation of multi-hop video transmission experiment system in VANET

Abts ract A wireless mutl i-hop videot ransmission experiment system is designed and implemented for vehiculra ad-hoc networks VANET and the rt ansm ission control protocol and routing protocol are proposed. This system in tegrates the embedded Linux system witha n ARM kernel and oc ns ists of a S3C6410 main control module a wirel ss local arean etwork WLAN card a LCD screne and so on.In the scenario of a wireless multi-hop video transmission both the H.264 and JPEG are used and their performances such as the compression rate delay and frame loss rate are analyzed in theory andc ompared in the experiment.The system is tested in the real indoor and outdoor environment.The results show that the scheme of the multi-hop video transmission experiment system can be applicable for VANET and multiple scenes and the transmission control protocol and routing protocol proposed can achieve real-time transmission and meet multi-hop requirements.

A real-time AI-assisted seismic monitoring system based on new nodal stations with 4G telemetry and its application in the Yangbi M_(S) 6.4 aftershock monitoring in southwest China

A rapidly deployable dense seismic monitoring system which is capable of transmitting acquired data in real time and analyzing data automatically is crucial in seismic hazard mitigation after a major earthquake.However,it is rather difficult for current seismic nodal stations to transmit data in real time for an extended period of time,and it usually takes a great amount of time to process the acquired data manually.To monitor earthquakes in real time flexibly,we develop a mobile integrated seismic monitoring system consisting of newly developed nodal units with 4G telemetry and a real-time AI-assisted automatic data processing workflow.The integrated system is convenient for deployment and has been successfully applied in monitoring the aftershocks of the Yangbi M_(S) 6.4 earthquake occurred on May 21,2021 in Yangbi County,Dali,Yunnan in southwest China.The acquired seismic data are transmitted almost in real time through the 4G cellular network,and then processed automat-ically for event detection,positioning,magnitude calculation and source mechanism inversion.From tens of seconds to a couple of minutes at most,the final seismic attributes can be presented remotely to the end users through the integrated system.From May 27 to June 17,the real-time system has detected and located 7905 aftershocks in the Yangbi area before the internal batteries exhausted,far more than the catalog provided by China Earthquake Networks Center using the regional permanent stations.The initial application of this inte-grated real-time monitoring system is promising,and we anticipate the advent of a new era for Real-time Intelligent Array Seismology(RIAS),for better monitoring and understanding the subsurface dynamic pro-cesses caused by Earth's internal forces as well as anthropogenic activities.

Priority-Based Real-Time Stream Coding over Multi-Channel with Packet Erasures

Multi-channel can be used to provide higher transmission ability to the bandwidth-intensive and delay-sensitive real-time streams. However, traditional channel capacity theories and coding schemes are seldom designed for the real-time streams with strict delay constraint, especially in multi-channel context. This paper considers a real-time stream system, where real-time messages with different importance should be transmitted through several packet erasure channels, and be decoded by the receiver within a fixed delay. Based on window erasure channels and i.i.d.(identically and independently distributed) erasure channels, we derive the Multi-channel Real-time Stream Transmission(MRST) capacity models for Symmetric Real-time(SR) streams and Asymmetric Real-time(AR) streams respectively. Moreover, for window erasures, a Maximum Equilibrium Intra-session Code(MEIC) is presented for SR and AR streams, and is shown able to asymptotically achieve the theoretical MRST capacity. For i.i.d. erasures, we propose an Adaptive Maximum Equilibrium Intra-session Code(AMEIC), and then prove AMEIC can closely approach the MRST transmission capacity. Finally, the performances of the proposed codes are verified by simulations.

A Method of Insulator’s NSDD Measurement and Its Device Based on Laser Transmission Principle

Accuracy measurement of the Non-soluble Deposit Density (NSDD) on the insulator surface is very important for the transmission line anti-pollution flashover works. A method to measure the NSDD on double sheds porcelain insulator surface based on laser transmission principle is proposed in this paper. Laser unit and luminous intensity sensor are installed between the up and down surface of the double sheds porcelain insulators, two glass tablets are put between the double sheds. The contamination on the glass tablets will influence the luminous intensity that reaches the intensity sensor. The luminous signal is changed to electrical signal, and the insulator’s NSDD could be obtained based on the difference of luminous intensity. The device can be used in online monitoring of the insulator's NSDD condition on the insulator surface.

Optimization for UAV-assisted simultaneous transmission and reception communications in the existence of malicious jammers

In this paper,we study an unmanned aerial vehicle(UAV)-assisted communication system,where the UAV is dispatched to implement simultaneous transmission and reception(STR)in the existence of multiple malicious jammers.Two schemes are investigated,namely frequency band-division-duplex(FDD)and time-fraction(TF).Based on the FDD scheme,the UAV can transmit information by using the portion of the bandwidth and receive information within the remaining portion of the bandwidth simultaneously.To perform the STR within the whole bandwidth,the TF-based scheme is considered by using a fraction of a time slot for the downlink,while the remaining fraction of the time slot is allocated for the uplink.We aim to maximize the worst-case throughput by optimizing the UAV three-dimensional(3D)trajectory and resource allocation for each scheme.The optimization problem is non-convex and thus computationally intractable.To handle the nonlinear problem,we use the block coordinate decomposition method to disaggregate the optimization problem into four subproblems and adopt the successive convex approximation technique to tackle non-convex problems.The simulation results demonstrate the performance of the TF-based scheme over the benchmark schemes.

Design of Simulation for Time-Division Multiplexing Digital Optimal Frequency Band Transmission System

This paper designs a simulation experiment model of the overall structure of time-division multiplexing digital optimal frequency band transmission system based on MATLAB simulation platform. The parameters of each module in the simulation model are set. The working process and performance of the time-division multiplexing digital optimal band transmission system are simulated. The simulation results show that the digital optimal band transmission system achieves the best transmission receiving conditions and performance, and the designed time-division multiplexing optimal digital band transmission simulation system achieves its functions. The research in this paper will help to improve the level of digital communication technology and to understand the structure of time-division multiplexing digital optimal band transmission system.

Receptive Anal Intercourse and HIV Infection

Objective: Inform the public that receptive anal intercourse (RAI) is a key transmission route of the human immunodeficiency virus (HIV) epidemic in the United States. Method: The role of receptive anal intercourse (RAI) in this epidemic will be examined using the following approach: 1) Risk comparison of HIV transmission via RAI to the other major routes of transmission. 2) HIV transmission risks of RAI using some of the present risk reduction techniques. 3) HIV infection via anal intercourse among male youth. 4) HIV infection via anal intercourse among women. Results: Of the major transmission routes of HIV, receptive anal intercourse has the highest transmission risk for acquiring HIV infection. RAI is 2 times the risk of needle-sharing during injection drug use (IDU) and 17 times the risk of receptive vaginal intercourse. The estimated per act probability of acquiring HIV from an infected source by the exposure route of RAI is high in most circumstances: 1) Condoms alone only partially reduce the high risk of RAI. With the addition of pre-exposure prophylaxis (PrEP), the risk is further reduced. 2) When one or both partners are infected with a sexually transmitted disease (STD), even with condom use, the risks are very high. With the addition of PrEP the risks are reduced, but RAI still carries significant risks. 3) With exposure to acute HIV (high viral load) the risks of RAI are very high and remain significant even with condom use and PrEP. Anal intercourse often begins in adolescence;both genders are at risk. Conclusion: Public knowledge of the high transmission risks of receptive anal intercourse may likely result in a downward trend of new HIV infections and contribute to ending the epidemic.

Coordinated multipoint transmission and reception based on multicarrier time division multiple access

Coordinated multipoint(CoM P)transmission and reception is a technique to reduce intercell interference and increase the cell edge throughput.In order to get maximum CoM P gain the networks and terminals involved in CoM P communication should be robust against time and frequency offset due to asynchronism between terminals and base stations.However,the modulation techniques proposed in LTE-Advanced standard(SC-FDMA and OFDMA)are quite sensitive to frequency offset because of DFT/IDFT used in the modulation systems,which brings difficulties for commercial implementation of CoM P technique based on LTE-Advanced.To relax the synchronization requirement in CoM P system,in this paper we introduce a CoM P technique based on a new multicarrier modulation scheme-multicarrier time division multiple access(MC-TDMA).In comparison with SC-FDMA and OFDMA,the MC-TDMA modulation can significantly improve the CoM P performance in case of carrier frequency offset.Simulation shows that at 20%of carrier frequency offset the CoM P system with MC-TDMA modulation can also keep high performance,while the system with SC-FDMA and OFDMA is totally lost in work.

矿井无线电波防爆安全发射功率研究

5G,5.5G,WiFi6,WiFi7,UWB,ZigBee等矿井移动通信系统及人员和车辆定位系统等发射的大功率无线电波有点燃瓦斯和煤尘的风险。因此,需要合理设置防爆无线电设备发射的无线电波防爆安全功率阈值,限制防爆无线电设备发射的无线电波功率。欧洲标准CLC/TR 50427:2004《Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation-Guide》规定了爆炸性气体环境中无线电波防爆安全接收点火功率阈值,但缺少无线电波防爆安全发射功率阈值的内容。国家标准GB/T 3836.1—2021《爆炸性环境第1部分:设备通用要求》和国际标准IEC 60079-0:2017《Explosive atmospheres-Part 0:Equipment-General requirements》虽然有无线电波防爆安全发射功率阈值的相关规定,但错误地将欧洲标准CLC/TR 50427:2004中的无线电波防爆安全接收点火功率阈值修改为无线电波防爆安全发射功率阈值,大大降低了爆炸性环境中无线电设备所能允许的最大发射功率。由于煤矿井下没有能作为接收天线的起重机这类细长结构物体,且现有矿井无线通信及定位系统工作频率均远大于30 MHz,所以,无线电波防爆安全接收点火功率阈值应为8 W,而不是国家标准GB/T 3836.1—2021和国际标准IEC 60079-0:2017规定的无线电波防爆安全发射功率阈值6 W。在发射天线发射的无线电波能量全部被等效天线吸收的最不利于无线电防爆的传输和耦合情况下,无线电设备工作频率为等效天线谐振频率时,接收点火功率达到最大,为等效天线接收的总功率的一半,即发射功率的一半。在实际工程中,无线传输效率和耦合效率均不会为1,因此,无线电波防爆安全发射功率阈值应是无线电波防爆安全接收点火功率阈值2倍以上。煤矿井下无线电波防爆安全接收点火功率阈值为8 W,因此,煤矿井下无线电波防爆安全发射功率阈值应大于16 W。

中华典籍英译研究的可视化分析(2013-2022)

随着中国文化“走出去”战略的深入推进,汉英翻译成为讲述中国故事、传播中国声音的重要方式,相关研究也呈现繁荣活跃的态势。本文以CSSCI和Web of Science2013年至2022年发表中华典籍英译研究的期刊文章为对象,运用可视化软件CiteSpace分析国内外发表相关文章的数量、时间、期刊、关键词和被引文献等数据,研究发现国内外研究热点存在较多重合。在微观层面,学者不仅聚焦中华典籍译本的正文本,还将视野拓展到副文本,探讨副文本在翻译活动中发挥的作用。另有学者借助语料库分析译本,以提高结论的客观性和公正性。在宏观层面,译本在目标语国家的传播、出版和接受等情况也是学者关注的焦点。基于汉英翻译研究现状,未来应继续扩大汉英翻译研究范围,给予其他类典籍更多关注;创新研究理论、方法和视角,拓宽研究深度和广度;打破学科界限,加强跨学科研究和翻译研究团队建设。

重绘“山海”:明胡文焕刻“山海经图”与近世《山海经》的知识重构

在晚明坊刻的书籍史语境下,胡文焕刻“山海经图”一方面以其世俗化的图文形态,勾勒出《山海经》接受史中“到民间去”的重要流脉,另一方面则在与日用类书“诸夷门”等通俗文献的互文中,折射出近世民间视野中关于《山海经》知识的重构方式,并由此为理解早期经典的民间接受与知识传递提供了重要线索。

椭圆函数低通滤波器在机载天线中的应用

以椭圆函数低通滤波器为原型,建立不同形式的宽带低通滤波器,通过HFSS软件对滤波器进行仿真分析。采用不同切向形式工艺降低装配误差对高次模的影响,并通过实际测试数据验证仿真结果的一致性。最终将两种不同形式的滤波器应用于机载天线系统进行业务测试,通过性能及数据对比,选择了一种更适合机载天线系统的宽带低通滤波器,收发隔离度达90 dB以上,为验证滤波器在机载天线中的应用提供了一些思路。

迭代、变迁与再造:有声读物的历史追溯与未来价值

政府工作报告连续10年写入“全民阅读”,有声读物成为数字化时代推动全民阅读的重要渠道。有声读物通过长时间的发展,已经趋于成熟。各时期的有声读物是如何影响社会和受众的?未来会给社会和人们带来哪些可能性?该文从我国有声读物的历史迭代出发,梳理出口语媒介、广播媒介及媒介融合时期有声读物的特点,并聚焦受众参与形式、接受主体及审美态度三方面的变迁,最后从媒介的创新、内容创作的解构及传受关系的重构三个维度构建有声读物未来的价值。追溯有声读物的历史,找准有声读物未来的发展方向,厘清受众的变化,明确有声读物的时代责任,能有效地助力有声读物的未来发展,也能促进全民阅读以更生动的形式开展。

北斗三号短报文在水文自动测报系统中的应用研究

为保障在极端自然灾害条件下水文自动测报系统中应用北斗三号短报文可靠传输数据,研究北斗三号短报文的技术特点和发送接收方式,结合水文自动测报系统的应用需求,提出在自动测报系统中应用北斗三号短报文传输和接收数据的技术方案。分析北斗三号短报文应用特点,以常用的雨水情遥测站为例总结北斗三号通信终端的集成方式、现场应用环境条件、遵循的通信协议和控制流程,选取适合的链路传输模式和报文编报方式,提出一种采用前置机FIU接收短报文的方案,分析其他北斗三号短报文数据接收方式的特点。应用北斗三号短报文可保障遥测站的数据稳定、可靠传输和接收,作为通信信道可广泛应用于各类型水文自动测报系统。