The thermal deformation behaviors of the as-cast and wrought modified IN617 nickel-based heat-resistant alloys at different temperatures(1000–1180℃)and strain rates(0.01–1 s^(−1))were studied.The constitutive equat...The thermal deformation behaviors of the as-cast and wrought modified IN617 nickel-based heat-resistant alloys at different temperatures(1000–1180℃)and strain rates(0.01–1 s^(−1))were studied.The constitutive equation was established to describe the relationship of the flow stress,temperature,and strain rate during thermal deformation.The effect of the thermal deformation conditions on the microstructure evolution of alloys was studied using electron backscatter diffraction.The results revealed that the thermal deformation activation energy of the as-cast alloy was greater than that of the wrought alloy.The dynamic recrystallization(DRX)process is slow at intermediate strain rate(0.1 s^(−1))due to the comprehensive influence of various factors,such as the critical strain of DRX nucleation and stored energy.The DRX volume fraction increases with the improvement of deformation temperature.The varied dynamic softening mechanisms induce the different thermal deformation behaviors of as-cast and wrought alloys.The dynamic recovery,discontinuous dynamic recrystallization(DDRX)and nucleation at slip zone caused by strain incompatibility in grains were observed during thermal deformation of as-cast alloys.In the process of thermal deformation of wrought alloys,DDRX was the primary dynamic crystallization mechanism.The continuous dynamic recrystallization was an auxiliary nucleation mechanism.展开更多
基金This research was supported by the National Energy Application Technology Research and Engineering Demonstration Program(NY20150101).
文摘The thermal deformation behaviors of the as-cast and wrought modified IN617 nickel-based heat-resistant alloys at different temperatures(1000–1180℃)and strain rates(0.01–1 s^(−1))were studied.The constitutive equation was established to describe the relationship of the flow stress,temperature,and strain rate during thermal deformation.The effect of the thermal deformation conditions on the microstructure evolution of alloys was studied using electron backscatter diffraction.The results revealed that the thermal deformation activation energy of the as-cast alloy was greater than that of the wrought alloy.The dynamic recrystallization(DRX)process is slow at intermediate strain rate(0.1 s^(−1))due to the comprehensive influence of various factors,such as the critical strain of DRX nucleation and stored energy.The DRX volume fraction increases with the improvement of deformation temperature.The varied dynamic softening mechanisms induce the different thermal deformation behaviors of as-cast and wrought alloys.The dynamic recovery,discontinuous dynamic recrystallization(DDRX)and nucleation at slip zone caused by strain incompatibility in grains were observed during thermal deformation of as-cast alloys.In the process of thermal deformation of wrought alloys,DDRX was the primary dynamic crystallization mechanism.The continuous dynamic recrystallization was an auxiliary nucleation mechanism.
