ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented. Based on the expression of magnetic force from the variational principle of ferromagnetic plates, the buckling and bending theory of thin plates, the Mises yield criterion and the increment theory for plastic deformation, we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method. Along with the phenomena of buckling/snapping and bending, or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed, the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads, the plastic regions expanding with the magnitude of applied magnetic field, as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.

THE METHOD OF THE RECIPROCAL THEOREM OF FORCED VIBRATION FOR THE ELASTIC THIN RECTANGULAR PLATES(Ⅲ)--CANTILEVER RECTANGULAR PLATES

In this paper,applying the method of the reciprocal theorem,we give the stationary solutions of the forced vibration of cantilever rectangular plates under uniformly distributed harmonic load and concentrated harmonic load acting at any point of the plates,the figures and tables of number value of bending moment and the deflection amplitudes as well.

Effects of Span Length and Additional Structure on Flow-Induced Transverse Vibration Characteristic of a Cantilevered Rectangular Prism

We consider the effects of the aspect ratio L/H (where L is the length of a prism, and H is the height of a prism normal to the flow direction) and the size of additional structures (which are a plate and a fin on the surface of a prism) on a vibration characteristic of a cantilevered rectangular prism. The present research is intended to support the analysis of energy harvesting research on the flow-induced vibration in water flow using a magnetostrictive phenomenon. The prisms are constructed from stainless steel and mounted elastically to a plate spring attached to the ceiling wall of the water tunnel. The prisms with aspect ratios of L/H ≥ 5 have reasonably identical vibration characteristics. However, the difference in the vibration characteristic appears distinctly on a rectangular prism with an aspect ratio of L/H = 2.5. The rectangular prism with an aspect ratio of L/H = 10 and a side ratio of D/H = 0.2 has a stable and large response amplitude and oscillates with a lower velocity. The length of the added plate and the size of the added fin influence the velocity of vibration onset. If the length of the added plate and fin size on the rectangular prism with D/H = 0.2 becomes large, the curve of the response amplitude shifts to that of the rectangular prism with D/H= 0.5. The response amplitude of the rectangular prism with/without plate or fin is found to be related to the second moment of area of the prism.

Analytical and finite-element study of optimal strain distribution in various beam shapes for energy harvesting applications

Owing to the increasing demand for harvesting energy from environmental vibration for use in self-powered electronic applications, cantilever-based vibration energy harvesting has attracted considerable interest from various parties and has become one of the most common approaches to converting redundant mechanical energy into electrical energy. As the output voltage produced from a piezoelectric material depends largely on the geometric shape and the size of the beam, there is a need to model and compare the performance of cantilever beams of differing geometries.This paper presents the study of strain distribution in various shapes of cantilever beams, including a convex and concave edge profile elliptical beam that have not yet been discussed in any prior literature. Both analytical and finite-element models are derived and the resultant strain distributions in the beam are computed based on a MATLAB solver and ANSYS finite-element analysis tools. An optimum geometry for a vibration-based energy harvesting system is verified.Finally, experimental results comparing the power density for triangular and rectangular piezoelectric beams are also presented to validate the findings of the study, and the claim, as suggested in the literature, is verified.