Recursive Least Squares Algorithm for a Nonlinear Additive System with Time Delay

This paper proposes a recursive least squares algorithm for a nonlinear additive system with time delay.By the Weierstrass approximation theorem and the key term separation principle, the model can be simplified as an identification model. Based on the identification model, a recursive least squares identification algorithm is used to estimate all the unknown parameters of the time-delayed additive system. An example is provided to show the effectiveness of the proposed algorithm.

Nonlinear Modeling and Identification of the Electro-hydraulic Control System of an Excavator Arm Using BONL Model

Electro-hydraulic control systems are nonlinear in nature and their mathematic models have unknown parameters. Existing research of modeling and identification of the electro-hydraulic control system is mainly based on theoretical state space model, and the parameters identification is hard due to its demand on internal states measurement. Moreover, there are also some hard-to-model nonlinearities in theoretical model, which needs to be overcome. Modeling and identification of the electro-hydraulic control system of an excavator arm based on block-oriented nonlinear（BONL） models is investigated. The nonlinear state space model of the system is built first, and field tests are carried out to reveal the nonlinear characteristics of the system. Based on the physic insight into the system, three BONL models are adopted to describe the highly nonlinear system. The Hammerstein model is composed of a two-segment polynomial nonlinearity followed by a linear dynamic subsystem. The Hammerstein-Wiener（H-W） model is represented by the Hammerstein model in cascade with another single polynomial nonlinearity. A novel Pseudo-Hammerstein-Wiener（P-H-W） model is developed by replacing the single polynomial of the H-W model by a non-smooth backlash function. The key term separation principle is applied to simplify the BONL models into linear-in-parameters struc^tres. Then, a modified recursive least square algorithm（MRLSA） with iterative estimation of internal variables is developed to identify the all the parameters simultaneously. The identification results demonstrate that the BONL models with two-segment polynomial nonlinearities are able to capture the system behavior, and the P-H-W model has the best prediction accuracy. Comparison experiments show that the velocity prediction error of the P-H-W model is reduced by 14%, 30% and 75% to the H-W model, Hammerstein model, and extended auto-regressive （ARX） model, respectively. This research is helpful in controller design, system monitoring and diagnosis.

Receiver-channel based adaptive blind equalization approach for GPS dynamic multipath mitigation

Aiming at mitigating multipath effect in dynamic global positioning system （GPS） satellite navigation applications, an approach based on channel blind equalization and real-time recursive least square （RLS） algorithm is proposed, which is an application of the wireless communication channel equalization theory to GPS receiver tracking loops. The blind equalization mechanism builds upon the detection of the correlation distortion due to multipath channels; therefore an increase in the number of correlator channels is required compared with conventional GPS receivers. An adaptive estimator based on the real-time RLS algorithm is designed for dynamic estimation of multipath channel response. Then, the code and carrier phase receiver tracking errors are compensated by removing the estimated multipath components from the correlators＇ outputs. To demonstrate the capabilities of the proposed approach, this technique is integrated into a GPS software receiver connected to a navigation satellite signal simulator, thus simulations under controlled dynamic multipath scenarios can be carried out. Simulation results show that in a dynamic and fairly severe multipath environment, the proposed approach achieves simultaneously instantaneous accurate multipath channel estimation and significant multipath tracking errors reduction in both code delay and carrier phase.

An on-line capacitor state identification method based on improved RLS

As an essential part of DC-Link in the power converter,capacitor plays a crucial role in absorbing ripple current and suppressing ripple voltage.The health and residual service life of the DC-Link capacitor is one of the decisive factors for the safety,stability,and efficiency of the system in which it is located.Aiming at the shortcomings of existing methods,such as low dynamic sensitivity of data update and fluctuation of identification results,a capacitor state identification method based on improved RLS is proposed in this paper.The proposed method is optimized by introducing the forgetting factor algorithm and root means square algorithm to modify the iterative formula and final identification results.Compared with existing methods,this method can identify the capacitor’s current state in real time and accurately.Finally,we successfully verified the accuracy,robustness,and adaptability of the proposed method by a series of experimental tests on a dSPACE platform.