Properties of Self-recoverable Mechanoluminescence Phosphor Ca_(5)Ga_(6)O_(14)∶Eu^(3+) and Its Information Encryption Application

A novel self-recoverable mechanoluminescent phosphor Ca_(5)Ga_(6)O_(14)∶Eu^(3+) was developed by the high-tem-perature solid-state reaction method,and its luminescence properties were investigated.Ca_(5)Ga_(6)O_(14)∶Eu^(3+)can produce red mechanoluminescence,and importantly,it shows good repeatability.The mechanoluminescence of Ca_(5)Ga_(6)O_(14)∶Eu^(3+) results from the piezoelectric field generated inside the material under stress,rather than the charge carriers stored in the traps,which can be confirmed by the multiple cycles of mechanoluminescence tests and heat treatment tests.The mechanoluminescence color can be turned from red to green by co-doping varied concentrations of Tb^(3+),which may be meaningful for encrypted letter writing.The encryption scheme for secure communication was devised by harnessing mechanoluminescence patterns in diverse shapes and ASCII codes,which shows good encryption performance.The results suggest that the mechanoluminescence phosphor Ca_(5)Ga_(6)O_(14)∶Eu^(3+),Tb^(3+)may be applied to the optical information encryption.

Structural and Luminescent Properties of Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)Green-Emitting Transparent Ceramic Phosphor

A series of spinel-type Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)(MgAlON:xMn^(2+))phosphors were synthesized by the solid-state reaction route.The transparent ceramic phosphors were fabricated by pressureless sintering followed by hot-isostatic pressing(HIP).The crystal structure,luminescence and mechanical properties of the samples were systematically investigated.The transparent ceramic phosphors with tetrahedrally coordinated Mn^(2+)show strong green emission centered around 515 nm under blue light excitation.As the Mn^(2+)concentration increases,the crystal lattice expands slightly,resulting in a variation of crystal field and a slight red-shift of green emission peak.Six weak absorption peaks in the transmittance spectra originate from the spin-forbidden ^(4)T_(1)(^(4)G)→^(6)A_(1) transition of Mn^(2+).The decay time was found to decrease from 5.66 to 5.16 ms with the Mn^(2+)concentration.The present study contributes to the systematic understanding of crystal structure and properties of MgAlON:xMn^(2+)green-emitting transparent ceramic phosphor which has a potential application in high-power light-emitting diodes.

Pillar effect induced by ultrahigh phosphorous/nitrogen doping enables graphene/MXene film with excellent cycling stability for alkali metal ion storage

Graphene's large theoretical surface area and high conductivity make it an attractive anode material for potassium-ion batteries(PIBs).However,its practical application is hindered by small interlayer distance and long ion transfer distance.Herein,this paper aims to address the issue by introducing MXene through a simple and scalable method for assembling graphene and realizing ultrahigh P doping content.The findings reveal that MXene and P-C bonds have a "pillar effect" on the structure of graphene,and the P-C bond plays a primary role.In addition,N/P co-doping introduces abundant defects,providing more active sites for K^(+) storage and facilitating K^(+) adsorption.As expected,the developed ultrahigh phosphorous/nitrogen co-doped flexible reduced graphene oxide/MXene(NPrGM) electrode exhibits remarkable reversible discharge capacity(554 mA hg^(-1) at 0.05 A g^(-1)),impressive rate capability(178 mA h g^(-1) at 2 A g^(-1)),and robust cyclic stability(0.0005% decay per cycle after 10,000 cycles at 2 A g^(-1)).Furthermore,the assembled activated carbon‖NPrGM potassium-ion hybrid capacitor(PIHC) can deliver an impressive energy density of 131 W h kg^(-1) and stable cycling performance with 98.1% capacitance retention after5000 cycles at 1 A g^(-1).Such a new strategy will effectively promote the practical application of graphene materials in PIBs/PIHCs and open new avenues for the scalable development of flexible films based on two-dimensional materials for potential applications in energy storage,thermal interface,and electromagnetic shielding.

Dancing bubble sonoluminescence in phosphoric acid solution

Sonoluminescence is more distinctly observed in phosphoric and sulfuric acid,which exhibit high viscosity and lower vapor pressures relative to water.Within an 85-wt%phosphoric acid solution saturated with argon(Ar),variations in the light-emitting regimes of bubbles were noted to correspond with increments in the driving acoustic intensity.Specifically,the bubbles were observed to perform a dance-like motion 2 cm below the multi-bubble sonoluminescence(MBSL)cluster,traversing a 25-mm^(2) grid during the camera exposure period.Spectral analysis conducted at the beginning of the experiment showed a gradual attenuation of CN(B^(2)S–X^(2)S)emission concurrent with a strengthening of Ar(4p–4s)atom emission lines.The application of a theoretical temperature model to the spectral data revealed that the internal temperature of the bubbles escalates swiftly upon their implosion.This study is instrumental in advancing the comprehension of the underlying mechanisms of sonoluminescence and in the formulation of a dynamic model for the behavior of the bubbles.

Achieving Narrowed Bandgaps and Blue-Light Excitability in Zero-Dimensional Hybrid Metal Halide Phosphors via Introducing Cation-Cation Bonding

Zero-dimensional(0D)hybrid metal halides,which consist of organic cations and isolated inorganic metal halide anions,have emerged as phosphors with efficient broadband emissions.However,these materials generally have too wide bandgaps and thus cannot be excited by blue light,which hinders their applications for efficient white light-emitting diodes(WLEDs).The key to achieving a blue-light-excitable 0D hybrid metal halide phosphor is to reduce the fundamental bandgap by rational chemical design.In this work,we report two designed hybrid copper(I)iodides,(Ph_(3)MeP)_(2)Cu_(4)I_(6)and(Cy_(3)MeP)_(2)Cu_(4)I_(6),as blue-light-excitable yellow phosphors with ultrabroadband emission.In these compounds,the[Cu_(4)I_(6)]^(2-)anion forms an I6 octahedron centered on a cationic Cu_(4)tetrahedron.The strong cation-cation bonding within the unique cationic Cu_(4)tetrahedra enables significantly lowered conduction band minimums and thus narrowed bandgaps,as compared to other reported hybrid copper(I)iodides.The ultrabroadband emission is attributed to the coexistence of free and self-trapped excitons.The WLED using the[Cu_(4)I_(6)]^(2-)anion-based single phosphor shows warm white light emission,with a high luminous efficiency of 65 Im W^(-1)and a high color rendering index of 88.This work provides strategies to design narrow-bandgap 0D hybrid metal halides and presents two first examples of blue-light-excitable 0D hybrid metal halide phosphors for efficient WLEDs.

Fabrication of YAG:Ce^(3+) and YAG:Ce^(3+),Sc^(3+) Phosphors by Spark Plasma Sintering Technique

In this study,a single-doped phosphors yttrium aluminum garnet(Y_(3)Al_(5)O_(12),YAG):Ce^(3+),single-doped YAG:Sc^(3+),and double-doped phosphors YAG:Ce^(3+),Sc^(3+) were prepared by spark plasma sintering(SPS)(lower than 1 200℃).The characteristics of synthesized phosphors were determined using scanning electron microscopy(SEM),X-ray diffraction(XRD),and fluorescence spectroscopy.During SPS,the lattice structure of YAG was maintained by the added Ce^(3+) and Sc^(3+).The emission wavelength of YAG:Ce^(3+) prepared from SPS(425-700 nm) was wider compared to that of YAG:Ce^(3+) prepared from high-temperature solid-state reaction(HSSR)(500-700 nm).The incorporation of low-dose Sc^(3+) in YAG:Ce^(3+) moved the emission peak towards the short wavelength.

Durable hierarchical phosphorus‐doped biphase MoS_(2)electrocatalysts with enhanced H^(*)adsorption

Phase engineering is an efficient strategy for enhancing the kinetics of electrocatalytic reactions.Herein,phase engineering was employed to prepare high‐performance phosphorous‐doped biphase(1T/2H)MoS_(2)(P‐BMS)nanoflakes for hydrogen evolution reaction(HER).The doping of MoS_(2)with P atoms modifies its electronic structure and optimizes its electrocatalytic reaction kinetics,which significantly enhances its electrical conductivity and structural stability,which are verified by various characterization tools,including X‐ray photoelectron spectroscopy,high‐resolution transmission electron microscopy,X‐ray absorption near‐edge spectroscopy,and extended X‐ray absorption fine structure.Moreover,the hierarchically formed flakes of P‐BMS provide numerous catalytic surface‐active sites,which remarkably enhance its HER activity.The optimized P‐BMS electrocatalysts exhibit low overpotentials(60 and 72 mV at 10 mA cm^(−2))in H_(2)SO_(4)(0.5 M)and KOH(1.0 M),respectively.The mechanism of improving the HER activity of the material was systematically studied using density functional theory calculations and various electrochemical characterization techniques.This study has shown that phase engineering is a promising strategy for enhancing the H*adsorption of metal sulfides.

Synthesis and Luminescence Improvement of CaAlSiN_(3) Phosphors Doped with Eu^(2+) and Mn^(2+) for White LEDs

Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to study the luminescence characteristics,energy gap,and thermal stability in detail.CaAlSiN_(3)∶Eu^(2+) exhibits an extended emission band when stimulated with 450 nm blue light,which is caused by the 4f65d to 4f7 transition of Eu^(2+).Similar⁃ly,CaAlSiN_(3)∶Mn^(2+) displays a wide emission band centered at 628 nm,which results from Mn^(2+)’s transition from 4T1(4G) to 6A1(6S).When the ions of Mn^(2+)were combined into CaAlSiN_(3)∶Eu^(2+),the photoluminescence intensity of Eu^(2+ )was greatly boosted because there was energy transfer and co-emission between Mn^(2+) and Eu^(2+).Beyond that,CaAlSiN_(3)∶Eu^(2+),Mn^(2+) emerges with splendid thermostability and high quantum efficiency,the quenching temperature surpasses 300℃,and the internal quantum efficiency is determined to be around 84.9%.The white LED was pack⁃aged with a combination of CaAlSiN_(3)∶Eu^(2+),Mn^(2+),LuAG∶Ce3+ and a blue chip.At a warm white-light corresponding color temperature(3009 K) with CIE coordinates(0.4223,0.3748),the color rendering index Ra has reached 93.2.CaAlSiN_(3)∶Eu^(2+),Mn^(2+) would have great application potential as a red-emitting phosphor for white LEDs.

Mechanism of phosphorus removal in beneficiation of high phosphorous oolitic hematite by direct reduction roasting with dephosphorization agent

High phosphorous oolitic hematite ore is one of typical intractable iron ores in China, and the conventional beneficiation methods are found to be impracticable to , remove phosphorus from the ore effectively. Better beneficiation index were gotten by direct reduction roasting with dephosphorization agent followed by two stages of grinding and magnetic separation. P content decreases from 0.82% in the raw ore to 0.06% in the magnetic concentrate, and the total iron grade increases from 43.65% to 90.23%, the recovery of iron can reach 87%. Mechanisms of phosphorus removal in the beneficiation of high phosphorous oolitic hematite ore by direct reduction roasting with dephosphorization agent were studied using XRD, SEM and EPMA. The results showed that about 20% of the apatite in the raw ore transferred into phosphorus and volatilized with the gas in the process of reduction roasting, while the rest 80% apatite was not involved in the reaction of generation of phosphorus, and remained as apatite in the roasted products, which was removed to tailings by grinding and magnetic separation. A small amount of phosphorus existed in the magnetic concentrate as apatite. The oolitic texture of raw ore was partly changed during roasting, resulting in the formation of nepheline in the reaction between the dephosphorization agent, SiO2 and Al2O3 in the raw ore, which greatly improved the liberation degree of minerals in the roasted products, and it was beneficial to the subsequent grinding and magnetic separation.

Effect of Phosphorus on the Content of Vitamin E in Different Soybean Cultivars

[Objective] This study aimed to explore the effects of phosphorus on the contents of vitamin E in different cultivars of soybean grains and find the optimum application amount of phosphorus for different genotypes of soybean cultivars,in order to increase the contents of vitamin E in soybean grains and improve the qualities.[Method] Three soybean cultivars were selected as experimental materials,including Heinong 48（high-protein cultivar）,Heinong 37（intermediate cultivar） and Heinong 44（high-oil cultivar）.The soybeans were planted in pots,with 0.033 g/kg soil of N and K2O,four phosphorus treatments were set,respectively applied with 0（P1）,0.033（P2）,0.067（P3） and 0.100（P4） g/kg soil of P2O5,and the total contents of vitamin E in different cultivars of soybean grains were determined by high-performance liquid chromatography method.[Result] The total contents of vitamin E in the same cultivar of soybean grains in P3 treatment were significantly higher than that in the other three treatments,the total contents of vitamin E in Heinong 37,Heinong 44 and Heinong 48 in P3 treatment had increased by 11.96%,16.55% and 14.02%,compared with the control;among the three soybean cultivars in P2 treatment,the content of vitamin E in Heinong 37 was the maximum;among the 12 treatment combinations,the total contents of vitamin E in Heinong 44 in P3 treatment was the maximum.The contents of vitamin E in three soybean cultivars significantly varied among the various cultivars and different phosphorus treatments.[Conclusion] Application of phosphorus could affect the contents of vitamin E in three soybean cultivars,appropriate application amount of phosphorus is advantageous to improve the contents of vitamin E in soybean grains.

Luminescent properties of Lu_2MoO_6:Eu^(3+) red phosphor for solid state lighting

The Eu^3＋ activated Lu2MoO6 phosphors were synthesized by high-temperature solid-state reaction method. The X-ray diffraction （XRD）, excitation spectra, emission spectra and decay lifetime of the phosphors were measured to characterize the structure and luminescent properties. The XRD results show that all the prepared phosphors can be assigned to the monoclinic structure. The experimental results indicate efficient absorption of near ultraviolet light from the Mo^6＋O^2- group followed by intensive emission in the visible spectral range. The optimal content of Eu3＋ is 10% （mole fraction）. The critical distance Rc and energy transfer mechanism were also discussed in detail. This red emitting material may be applied as a promising red phosphor for the near ultraviolet excited white light emitting diodes.

白光LED用Phosphor-in-Glass荧光材料的研究进展

荧光粉/玻璃复合材料(Phosphor-in-Glass,PiG)具有优异的发光性能、导热性和化学稳定性,将有望替代传统白光LED产品中的有机树脂基荧光转换层,同时解决散热、发光效率、品质、眩光、使用寿命等多项技术性难题,具有广阔的市场应用前景。本文从发光性能、透明度、机械强度及批量化生产等方面分析了PiG材料研究过程中出现的关键科学问题,并综述了解决上述问题所采取的针对性措施,包括制备方法(压片烧结法、熔体急冷法、涂膜烧结法)、材料组分设计和荧光粉层结构优化等,从而全面阐述了高性能PiG材料的最新研究现状,最后展望了其未来的研究趋势。

￣(151)Eu-MOSSBAUER SPECTRA AND XPS INVESTIGATION OF BaFBr:Eu PHOSPHOR

Eu Mossbauer spectra of BaFBr:Eu phosphor are reported for the first time.The results show that f(Eu(2+) )<f(Eu(3+)) or <x2>Eu(2+)><x2>Eu(3+),which indicates that the attraction between phonons and Eu(2+) is stronger than that between phonons and Eu(3+),this may cause a faster increase of f(Eu=(2+)vs f(Eu(3+)) when temperature decreases as observed in the experiments.It is also found from Mossbauer investigation that when temperature decreases,the relative content of Eu(2+) decreases, while that of Eu(3+) increases.The temperature dependent Mossbauer spectra provide evidence for electron exchange or hopping between Eu(2+) or Eu(3+) sites in BaFBr lattice. The Mossbauer results are discussed and compared with the results of XPS and Photoluminescence studies.

Adsorption of Cr(Ⅵ) in Water with Phosphoric Acid Modified and Ordinary Walnut Shells

A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr（Ⅵ） was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr（Ⅵ） removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.

Size effects on deformation behavior of C5210 phosphor bronze thin sheet

To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment at different temperatures; and then tensile tests of samples with different thicknesses and grain sizes were conducted at room temperature. The results show that yield strength increases with decreasing thickness from 800 to 50 μm, but work hardening exponent and total elongation decrease, and a modified model was proposed to describe the relation between yield strength and thickness; yield strength decreases as the grain size increases, but work hardening exponent shows an increasing trend, total elongation increases to a peak and then decreases. Fracture morphology of tensile specimens was observed by SEM, which indicates that all tensile specimens are ductile fracture. The dimple intensity increases as the specimen thickness increases but reduces with the specimen grain size increasing.

Cemented backfilling performance of yellow phosphorus slag

The experiments on the cemented backfilling perfbrmance of yellow phosphorus slag, including physical-mechanical properties, chemical compositions, optimized proportion, and cementation mechanisms, were carried out to make good use of yellow phosphorus slag as well as tackle with environment problems, safety problems, geological hazards, and high-cost issues during mining in Kaiyang Phosphorus Mine Group, Guizhou. The results show that yellow phosphorus slag can be used as the cement substitute for potential coagulation property. Quicklime, hydrated lime, and other alkaline substances can eliminate the high residual phosphorus to improve the initial strength of backfilling body. The recommended proportions （mass ratio） are 1：1 （yellow phosphorus slag：phosphorous gypsum）, 1：4：10 （Portland cement：yellow phosphorus slag：phosphorous gypsum）, and 1：4：10 （ultra fine powder：yellow phosphorus slag：phosphorous gypsum） with 5wt% of hydrated lime addition, 60wt% of solid materials, no fly ash addition, and good rheological properties. The hydration reaction involves hydration stage, solidifying stage, and strength stage with Ca（OH）2 as the activating agent. The reaction rates of yellow phosphorus slag, Portland cement, and ultrafine powder hydration with the increase of microstructure stability and initial strength.

Luminescence Properties of Green-Emitting Phosphor (Ba_(1-x),Sr_x_2SiO_4∶Eu^(2+) for White LEDS

The （Ba1- x, Srx ） 2 SiO4 ： EU^2＋ green-emitting phosphors were synthesized by conventional solid-state reaction in a CO-reductive atmosphere, and their luminescent properties were investigated. The XRD data show that the Ba/Sr ratio not only affects the lattice parameters, but also influences the emission peak. The excitation spectra indicate that this phosphor can be effectively excited by UV light from 370 to 470 nm. The emission band is due to the 4f^65d^1→4f^7 transition of the Eu^2＋ ion. With an increase in x, the emission band shifts to longer wavelength and the reason was discussed. The emission spectra exhibit a satisfactory green performance under different excitation wavelength（380,398,412,420,460 nm）. （Ba1- x, Srx ） 2 SiO4 ： EU^2＋ is a promising phosphor for green white-lighting-emission diode by ultraviolet chip.

YAG∶Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.

Luminescence and Preparation of LED Phosphor Ca_8Mg(SiO_4)_4Cl_2∶Eu^(2+)

Calcium magnesium chlorosilicate doped by europium, Ca8Mg（SiO4）4Cl2： Eu^2＋, was prepared by the solid state reaction at high temperature. The compound obtained is pure Ca8Mg（SiO4）4Cl2 phase with cubic structure. Its average particle size is 5 μm, and it has good dispersity and morphological form. The excitation spectrum of Ca8Mg（SiO4）4Cl2： Eu^2＋ is a wide band, which covers from 270 to 480 nm. The emission spectrum is also a wide band peaked at 510 nm. The luminescent intensity reaches to the maximum when the concentration of Eu^2 ＋ is 2%. The wavelength of emission and excitation of the phosphor with various Eu^2 ＋ contents keeps constant. This spectrum range matches violet and blue LED chips very well, and its strong luminescence intensity is suitable for a green phosphor of tricolor phosphor of white light LED.

Preparation and characterization of Eu^(3+)-doped CaCO_3 phosphor by microwave synthesis

A Eu^3＋-doped CaCO3 phosphor with red emission was prepared by microwave synthesis. The scanning electron microscopy （SEM） image and laser particle size analysis show that the CaCO3：Eu^3＋ particles are needle-like in the length range of 5.0-10.0 μm. The results of X-ray diffraction （XRD） analysis, Fourier transform infrared spectroscopy （FT-IR）, and Raman spectroscopy indicate that pure aragonite CaCO3：Eu^3＋ is prepared using microwave irradiation and the Eu^3＋ ion as a luminescence center inhabits the site of Ca^2＋. The photoluminescence excitation （PLE） spectrum shows that the strong broad band at around 270 nm and weak sharp lines in 300-550 nm are assigned to the charge transfer band of Eu^3＋-O^2- and intra-configurational 4f-4f transitions of Eu^3＋, respectively. The photoluminescence （PL） spectrum implies that the red luminescence can be attributed to the transitions from the ^5D0 excited level to the ^7FJ （J = 0, 1, 2, 3, 4） levels of Eu^3＋ ions with the mainly electric dipole transition ^5D0 → ^7F2 （614 and 620 nm）, and the Eu^3＋ ions prefer to occupy the low symmetric site in the crystal lattice.