Mechano-chemical sulfidization of zinc oxide by grinding with sulfur and reductive additives

A novel process for sulfidation of ZnO by co-grinding with sulfur and reductive additives （P, Fe, A1, and Mg） was developed. The sulfidation extent of ZnO with the addition of P, Fe, A1 or Mg can reach 85.2%, 81.6%, 96.7% and 92.6% after grinding for 4, 6, 1 and 1 h, respectively. Based on the chemical phase composition analysis and morphological characteristics of sulfidized products by XRD, SEM and TEM, a possible reaction mechanism, mechanically induced self-propagating reaction （MSR）, was proposed to explain the sulfidization reaction. In addition, the floatability of sulfidized products was investigated for the recovery of metal sulfide and ZnS can be concentrated with a high concentration ratio and concentrate grade. By using the sulfidizing process, it is expected that the recovery of zinc from the wastes or purification of heavy-metal-containing hazardous residues is technically feasible.

Improvement of AlN Thermal Conductivity Based on Reductive Compound Additives

AlN ceramics were prepared by plasma activation sintering(PAS)with compound additives yttrium acetylacetonate(Y(acac)_(3))and melamine(C_(3)H_(6)N_(6)).The effects of compound additives on the microstructure,density,and thermal properties of Al N ceramic were studied.Y(acac)3and C_(3)H_(6)N_(6)can form Y_(2)O_(3),residual organic carbon and reducing gas during the heating process,which improves the Al N sintering performance at a temperature of 1700℃and the bulk thermal conductivity.When the content of Y(acac)_(3)is 10 wt%and C_(3)H_(6)N_(6)is 3 wt%,the thermal conductivity of Al N ceramics is 105.6 W/(m·K),which is much higher than that of Al N ceramics with Y_(2)O_(3)under the same sintering conditions.This work provides theoretical reference for the preparation of high-performance Al N ceramic.

Mechanochemical sulfidization of a mixed oxide-sulphide copper ore by co-grinding with sulfur and its effect on the flotation efficiency

Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron,aluminum and magnesium powders was investigated for the first time.Also,the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail.The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.%and it was attributed to the possible existence of S\\O bonding on copper oxides surfaces.In addition,adding magnesium nitrate salt,magnesium powder,iron nitrate salt and aluminum powder as additive associated with 0.5 wt%sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%,0.2 wt%,0.5 wt%and 0.5 wt%,respectively.Also,the effect of grinding time and sulfidization pH with 0.5 wt%sulfur solely was determined and pH s of 7.5 to 8.5 gave the best results.The highest recovery(75.76%)and separation efficiency(63.44%)were achieved at pH of 7.5 and 8.5,respectively.

The Reductive Addition Reaction of Substituted 2-Chloromethyl-1,3,4-oxadiazole to Aldehydes and Ketones Promoted by Samarium Diiodide

1-（β-Hydroxyalkyl）-l,3,4-oxadiazole derivatives were synthesized via reductive addition reactions of 2-chloromethyl-l,3,4-oxadiazole with carbonyl compounds under mild conditions promoted by SmI2.

Microencapsulated paraffin as a tribological additive for advanced polymeric coatings

Numerous tribological applications,wherein the use of liquid lubricants is infeasible,require adequate dry lubrication.Despite the use of polymers as an effective solution for dry sliding tribological applications,their poor wear resistance prevents the utilization in harsh industrial environment.Different methods are typically implemented to tackle the poor wear performance of polymers,however sacrificing some of their mechanical/tribological properties.Herein,we discussed the introduction of a novel additive,namely microencapsulated phase change material(MPCM)into an advanced polymeric coating.Specifically,paraffin was encapsulated into melamine-based resin,and the capsules were dispersed in an aromatic thermosetting co-polyester(ATSP)coating.We found that the MPCM-filled composite exhibited a unique tribological behavior,manifested as“zero wear”,and a super-low coefficient of friction(COF)of 0.05.The developed composite outperformed the state-of-the-art polytetrafluoroethylene(PTFE)-filled coatings,under the experimental conditions examined herein.

Visible Light-Mediated Cobalt and Photoredox Dual-Catalyzed Asymmetric Reductive Coupling for Axially Chiral Secondary Alcohols

Secondary alcohols bearing both axial and central chirality comprise attractive biological activity and exhibit excellent chiral induction in asymmetric reactions.However,only very limited asymmetric catalytic approaches were developed for their synthesis.We herein describe visible light-mediated cobalt-catalyzed asymmetric reductive Grignard-type addition of aryl iodides with axially prochiral biaryl dialdehydes leading to the direct construction of axially chiral secondary alcohols.Preliminary mechanistic studies indicate that efficient kinetic recognition of diastereomers might occur for axially prochiral dialdehydes to improve the stereoselectivity,which might open a new avenue for the challenging cascade construction of multiple chiral elements.This protocol features excellent enantio-and diastereoselectivity,green and mild conditions,simple operation,and broad substrate scope,providing a modular platform for the synthesis of secondary axially chiral alcohols.