Design of MC9 Test Equipment for Inertial Reference System

Inertial reference system is one of the airborne equipment.According to the requirements of SAE ARP4754A Guidelines for Development of Civil Aircraft and Systems,MC9 equipment qualification test is needed to verify that the inertial reference system can perform reservation function under specified service conditions.That is,the inertial reference system shall pass certain environmental tests specified in DO⁃160G.Some tests are faced with the problem that the test equipment should have the function requirements of isolation protection and load simulation.Therefore,a kind of test equipment which can provide isolation protection and simulate load function in the test is designed.

Adaptive filter for a miniature MEMS based attitude and heading reference system

An extended Kalman filter with adaptive gain was used to build a miniature attitude and heading reference system based on a stochastie model. The adaptive filter has six states with a time variable transition matrix. When the system is in the non-acceleration mode, the accelerometer measurements of the gravity and the compass measurements of the heading have observability and yield good eslimates of the states. When the system is in the high dynamic mode and the bias has converged to an aceurate estimate, the attitude caleulation will be maintained for a long interval of time. The adaptive filter tunes its gain automatically based on the system dynamics sensed by the accelerometers to yield optimal performance,

Biological improvement of saline alkali soil reference system:A review

This work presents a reference system overview to improve the efficiency of biological improvement of saline-alkali soil developed during the last thirty years, ranging from connotation, general methods and species, soil desalination, soil structure, soil organic content, microbial flora, enzyme activity, yield and economic benefits. The reference system presented is divided into three main groups: suitable varieties, suitable cultivation measures, and a comprehensive evaluation system.There has been a lot of research on biological improvement of saline alkali soil, but these studies are very fragmented and lack a comprehensive standard system. Also, there is a lack of practical significance, particularly with regard to optimal species, densities and times of sowing for particular regions. On the other hand, the corresponding cultivation measure is very important. Therefore, a reference system plays an important role to the effect of biological improvement of saline alkali soil.

The Confirmation of Hypothesis of the Absolute Reference System

The purpose of the research in this article is the examination of the agreement of the hypothesis of the absolute reference system with the results of experiments that have been implemented in the past in order to confirm the special theory of relativity. To achieve this goal, we have chosen for discussing a theoretical topic of electromagnetism, that of electromagnetic mass calculation, and some experiments, some of which concern the transverse Doppler effect in a rotated system, two experiments that concern the kinetic energy measurement of accelerated electrons, one of which is the well known Bertozzis experiment, one experiment that concerns the propagation of Coulomb fields and one more experiment that concerns the effect of annihilation. The basic principles of the hypothesis of the absolute reference system, and the electromagnetic theory derived from these principles, are used to explain the experimental results. In these examples, the hypothesis of the absolute reference system is confirmed, since the experimental results agree with the predictions of this hypothesis. Also, in the discussion of calculation of electromagnetic mass is addressed the difficulty of solving this problem, when someone tries to solve this according to the energy-mass relation of the theory of relativity.

Initial alignment for low-cost attitude and heading reference systems

MEMS （micro electro mechanical systems） inertial navigation system ~, Mll＇~3） nas Been WllUly used in robots for its low-cost. The MINS and magnetometers are commonly the component parts of the attitude and heading reference systems （AHRS）, which provide pitch and roll angles relative to the earth gravity vector, and heading angle relative to the north. However, the performance of sen- sors with low cost AHRS is not so good. The gyros are not sensitive enough to observe the earth an- gular velocity, so the traditional technique like alignment algorithm is invalid. The measurements of gyros become useless to determine the initial attitude matrix from navigation frame to body frame. The alignment algorithm is computed by the accelerometers and magnetometers. The process is es- tablished as an optimization problem of finding the maximum eigenvector. Meanwhile the sensitive analysis with respect to the biases of accelerometers is proposed. Then the recursive least squares al- gorithm （RLSA） is introduced. The comparison between the proposed method and RLSA is provid- ed. The results demonstrate its accuracy favorably and verify the feasibility of the proposed algo- rithm.

Astronomical relativistic reference systems with multipolar expansion: the global one

With the rapid development of techniques for astronomical observations, the precision of measurements has been significantly increasing. Theories describing astronomical relativistic reference systems, which are the foundation for processing and interpreting these data now and in the future, may require extensions to satisfy the needs of these trends. Besides building a framework compatible with alternative theories of gravity and the pursuit of higher order post-Newtonian approximation, it will also be necessary to make the first order post-Newtonian multipole moments of celestial bodies be explicitly expressed in the astronomical relativistic reference systems. This will bring some convenience into modeling the observations and experiments and make it easier to distinguish different contributions in measurements. As a first step, the global solar system reference system is expressed as a multipolar expansion and the post-Newtonian mass and spin moments are shown explicitly in the metric which describes the coordinates of the system. The full expression of the global metric is given.

Model analysis and resonance suppression of wide-bandwidth inertial reference system

In the fields of earth observation,deep space detection,laser communication,and directional energyweapon,the target needs to be observed and pointed at accurately.Acquisition,tracking,and pointing(ATP)systems are usually designed to stabilize the line of sight(LOS)within sub-micro radian levels.In the case of an ATP system mounted on a mobile platform,angular disturbances experienced by the mobile platform will seriously affect the LOS.To overcome the problemthat the sampling frequency of detectors is usually limited and achieving several hundreds of hertz is difficult,thewide-bandwidth inertial reference system(WBIRS)and fast steeringmirror are usually integrated into ATP systems to mitigate these angular disturbances.To reduce the structural stress,a flexible support providing two rotational degrees of freedomis usually adopted for the system.However,the occurrence of resonant points within the bandwidthwill be inevitable.Measurements have to be taken to compensate these low-frequency resonant points to realize a wide bandwidth and high precision.In this paper,the lowfrequency resonant points of a systemwere simulated using finite element analysis and tested by a systemidentification method.The results show that the first-order resonance happened at 34.5 Hz with a gain of 28 dB.An improved double-T notch filter was designed and applied in a real-time system to suppress the resonance at 34.5 Hz.The experimental results show that the resonance was significantly suppressed.In particular,the resonance peak was reduced by 79.37%.In addition,the closed-loop system settling time was reduced by 36.2%.

On the Significance of Reference System for Active Damping of Vibration Isolators in Gravitational Wave Detection

Several active damping methods corresponding to various reference systems are discussed.The theoretical analyses show that a quasi-fixed reference system can be used to improve the high-frequency performance of a multi-stage active damping system because its high-frequency performance is equivalent to that of a low-pass electronic filter with a very low cut-off frequency.

ON THE PERFORMANCE OF ANALOG MULTIUSER DETECTION IN ULTRA-WIDEBAND TRANSMITTED-REFERENCE SYSTEM

The detection performance is evaluated for our proposed analog multiuser receiver in Ultra-WideBand (UWB) transmitted-reference system. In the presence of dense multipath and multi-access signals,the performance analysis is difficult due to the complicated waveform of received impulse. We develop an approach to analyze the steady-state Signal-to-Interference-plus-Noise (SINR) of the detector output. The multipath-spread impulse is fitted to an exponentially decaying profile in the analysis. A closed-form expression of steady-state SINR is further deduced for the proposed Least Minimum Square (LMS) detector. The analysis is validated by simulations in Line-Of-Sight (LOS) and Non-Line-Of-Sight (NLOS) channel respectively. Based on the theoretical results,the multipath delay spread is employed to determine the optimal width of the integration window of the detector.

Fuzzy Sliding Mode Observer for Vehicular Attitude Heading Reference System

In low-cost Attitude Heading Reference Systems (AHRS), the measurements made by Micro Electro-Mechanical Systems (MEMS) type sensors are affected by uncertainties, noises and unknown disturbances. In this paper, considering the robustness of sliding mode observers against structured and unstructured uncertainties, and also exogenous inputs, the process of design and implementation of a sliding mode observer (SMO) is proposed based on a linearized model of the AHRS. To decrease the chattering phenomenon is the main difficulty of the SMO. Through smoothing the discontinuity term, the tracking performance of the observer is attenuated. Boundary layer technique, for example, using a saturation term, is the common smoother to remove the chattering drawbacks. However, through poor tracking performance, the high range chattering could not be removed by this method. Therefore, a knowledge-based Mamdani-type fuzzy SMO (FSMO) is proposed to decrease the chattering effects intelligently, which in turn could obtain the high accuracy tracking performance of the SMO. Following proving the stability of the proposed SMOs based on direct Lyapunov’s method, the performance of the proposed observers is compared with that of the extended Kalman filter through simulation and real experiments of an AHRS.

Inner Attitude Integration Algorithm Based on Fault Detection for Strapdown Inertial Attitude and Heading Reference System

This article proposes a new inner attitude integration algorithm to improve attitude accuracy of the strapdown inertial attitude and heading reference system （SIAHRS） , which, by means of a Kalman filter, integrates the calculated attitude from the accelerometers in inertial measuring unit （IMU） , called damping attitudes, with those from the conventional IMU. As vehicle＇ s acceleration could produce damping attitude errors, the horizontal outputs from accelerometers are firstly used to judge the vehicle＇ s motion so as to determine whether the damping attitudes could be reasonably applied. This article also analyzes the limitation of this approach. Furthermore, it suggests a residual chi-square test to judge the validity of damping attitude measurement in real time, and accordingly puts forward proper information fusion strategy. Finally,the effectiveness of the proposed algorithm is proved through the experiments on a real system in dynamic and static states.

COMPARISON AND EVALUATION OF CURRENT REFERENCE GENERATION STRATEGIES FOR ACTIVE POWER FILTERS IN THREE-PHASE FOUR-WIRE SYSTEMS

For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.

The System of Reference and Lexical Cohesion in Newspaper-An Example of Analyzing "Beijing and Shanghai in Race to Attract Top Foreign Talents"

Discourse analysis is gaining its prominence in teaching reading. The paper presents an example of analyzing the system of reference and lexical cohesion of a news report. It demonstrates how to involve discourse analysis into the teaching of newspaper reading in order to make students get a clear framework of reference and lexical cohesion in a functional-grammar-conscious manner.

Design of a Kind of Model Reference Adaptive Missile Control System

Aim To present an adaptive missile control system adaped to the external disturbance and the mobility of target movement. Methods Model reference adaptive control (MRAC) was applied and modified in the light of the traits of the anti tank missile. Results Simulation results demonstrated this control system satisfied the requirement of anti tank missile of dive overhead attack. Conclusion It is successful to use MRAC in missile control system design, the quality is better than that designed by classical control theory.

Elements and Experiments of Shenzhen Continuous Operating Reference Stations (SZCORS) System

Real-time kinematic GPS precise positioning has been playing an increasing role in both surveying and navigation. Based on the city’s fibre LAN network, Shenzhen Continuous Operating Reference Stations (SZCORS) system has been established and consists of GPS reference stations, system control center, user’s data center, and real-time datacom network. The SZCORS system provides users the real-time centimeter positioning or post-processing millimeter positioning. This paper makes discussion on the structure of SZCORS system. Some experiments have been made to test the usablity, and then the data has been analyzed.

FIRST INTEGRALS AND INTEGRAL INVARIANTS FOR VARIABLE MASS NONHOLONOMIC SYSTEM IN NONINERTIAL REFERENCE FRAMES

The first integrals and their conditions of existence for variable massnonholonomic system in noninertial relerence frames are obtained,and the canonicalequations and the variation equations of the system are extended. It is proved that using the first integral we can construct the integral invariant of the system.Finally,a series of deductions and an example are given.

INTEGRAL THEORY FOR THE DYNAMICS OF NONLINEAR NONHOLONOMIC SYSTEM IN NONINERTIAL REFERENCE FRAMES

This paper establishes the integral theory for the dynamics of nonlinear nonholonomic system in noninertial reference frame. Firstly, based on the Routh equation of the relative motion of nonlinear nonholonomic system gives the first integral of the system. Secondly, by using cyclic integral or energy integral reduces the order of the equation and obtains generalized Routh equation and Whittaker equation respectively. Thirdly, derives canonical equation and variation equation and by using the first integral constructs integral invariant. And then, establishes the basic integral variants and the integral invariant of Poincare-Cartan type. Finally, we give a series of deductions.

Refining the Reference Values of Diers 4D Formetric System and Introducing a Qualitative Spine Profile Based on Percentile Ranking

Background: In order to detect possible abnormalities of the spine posture of an individual patient, it is mandatory to dispose of adequate reference values based on measurements in a normal, symptom-free population. The Diers formetric?system allows for non-invasive and accurate assessment of the vertebral column based on the registration of external aspect of the back surface using the Moiré principle. Objective: To create a qualitative spine profile based on the percentile ranking of measurements obtained by the Diers formetric system taking into account possible confounding factors. Materials and Methods: Statistical analysis of formetric recordings in 216 symptom-free volunteers. Results: Maximal kyphotic angle, maximal scoliotic angle, sagittal imbalance, flèche cervicale, and pelvic inclination are significantly influenced by gender and by body mass index (BMI). A synoptic chart was created presenting the percentile ranking taking into account gender and BMI. The percentile ranking was summarized in both a table with colour code and depicted in a histogram of the individual’s Qualitative Spine Profile (QSP). Clinical Significance: Percentile ranking and the Quantitative Spine Profile taking into account gender and BMI should permit a more precise and reliable assessment of possible posture deviations related to the patient’s complaints, and may assist the therapist in selecting the best mode of treatment.

Book Announcement of L. Celentano, Robust Tracking Controllers Design with Generic References for Continuous and Discrete Uncertain Linear SISO Systems, LAP LAMBERT Academic Publishing, 2012

In this book new results on controller design techniques for the tracking of generic reference inputs are presented. They allow the design of a controller for an uncertain process, either continuous or discrete-time, without zeros, and with measurable state. The controller guarantees that the control system is Type 1 and has the desired constant gain and poles or that the control system tracks, with a specified maximum error and with a specified maximum time constant, a generic reference with bounded derivative (variation in the discrete-time case), also in the presence of a generic disturbance with bounded derivative (variation). In addition, it is considered the case in which the reference is known a priori. The utility and the efficiency of the proposed methods are illustrated with attractive and significant examples of motion control and temperature control. This book is useful for the design of control systems, especially for manufacturing systems, that are versatile, fast, precise and robust.

Fiber Bragg Grating Sensor Array System Based on Digital Phase Generated Carrier Demodulation and Reference Compensation Method

A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.