Comparative Analysis of Application of Seismic Wave Reflection Method in Advanced Geological Prediction

Seismic wave reflection method is an advanced geophysical detection method in tunnel geological prediction.It is more sensitive and effective in detecting geological anomalies such as fault fracture zone and karst.In order to verify the prediction efficacy and accuracy of the seismic wave reflection method with different instruments and equipment(tunnel geological prediction[TGP]/tunnel seismic prediction[TSP])and different vibration modes(hammering,explosives),a comparison test was carried out in Jinping Tunnel.The test results showed that the time-consumption of the hammering source was short,which can greatly reduce the impact on the construction site;different vibration sources methods of seismic wave reflection can predict the unfavorable geological sections accurately.

Reflectivity forward modeling and a CSSI method seismic inversion study of igneous intrusive area,coked area,and gas-enriched area located within a coal seam

We applied the reflectivity method and the constrained sparse spike inverse modeling(CSSI) method to the interpretation of coal field lithologic seismic data.After introducing the principles of these two methods we discuss some parameters of a geological model involving possible gas enriched areas or intruded igneous rock.The geological model was constructed and a 60 Hz seismic response profile was obtained looking for igneous rock intrusion and coked areas of the coal seam using the reflectivity method.Starting from synthesized logging data from two wells and a synthesized seismic wavelet we calibrated the model to show accurate strata.Finally,we predicted the lithology within a 10 m igneous rock area,a 3 m coal seam area,and a coked area using the CSSI technique.The results show that the CSSI technique can identify hard to recognize lithologic features that normal profil-ing methods might miss.It can quantitatively analyze and evaluate the intrusive area,the coked area,and the gas-enriched area.

Measurement of inner surface roughness of capillary by an x-ray reflectivity method

The inner surface roughness of a capillary is investigated by the reflectivity of x-rays penetrating through the capillary. The results are consistent with the data from atomic force microscope （AFM）. The roughness measured by this new method can reach the order of angstroms with high quality capillaries.

Effective wave identification and interference analysis of the seismic reflection method in mines

Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.

Experimental analysis of interface contact behavior using a novel image processing method

The spatial and temporal evolution of real contact area of contact interface with loads is a challenge.It is generally believed that there is a positive linear correlation between real contact area and normal load.However,with the development of measuring instruments and methods,some scholars have found that the growth rate of real contact area will slow down with the increase of normal load under certain conditions,such as large-scale interface contact with small roughness surface,which is called the nonlinear phenomenon of real contact area.At present,there is no unified conclusion on the explanation of this phenomenon.We set up an experimental apparatus based on the total reflection principle to verify this phenomenon and analyze its mechanism.An image processing method is proposed,which can be used to quantitative analysis micro contact behaviors on macro contact phenomenon.The weighted superposition method is used to identify micro contact spots,to calculate the real contact area,and the color superimposed image is used to identify micro contact behaviors.Based on this method,the spatiotemporal evolution mechanism of real contact area nonlinear phenomena is quantitatively analyzed.Furthermore,the influence of nonlinear phenomenon of real contact area on the whole loading and unloading process is analyzed experimentally.It is found that the effects of fluid between contact interface,normal load amplitude and initial contact state on contact behavior cannot be ignored in large-scale interface contact with small roughness surface.

Label-Free and Real-Time Monitor of Binding and Dissociation Processes between Protein A and Swine IgG by Oblique-Incidence Reflectivity Difference Method

Life science has a need for detection methods that are label-free and real-time. In this paper, we have selected staphylococcal protein A （SPA） and swine immunoglobulin G （IgG）, and monitor the bindings between SPA and swine IgG with different concentrations, as well as the dissociations of SPA-swine IgG complex in different pH values of phosphate buffer by oblique-incidence reflectivity difference （OIRD） in a label-free and real-time fashion. We obtain the ON and OFF reaction dynamic curves corresponding to the bindings and dissociations of SPA and swine IgG. Through our analysis of the experimental results, we have been able to obtain the damping coefficients and the dissociation time of SPA and swine IgG for different pH values of the phosphate buffer. The results prove that the OIRD technique is a competing method for monitoring the dynamic processes of biomolecule interaction and achieving the quantitative information of reaction kinetics.

Application of the Common Offset Seismic Reflection Method to Urban Active Fault Surveys

The method and principle of common offset seismic surveys as well as the field data gathering and processing technique were introduced briefly. Through two urban active fault survey examples in Fuzhou and Shenyang, the efficiency and limitation of using the common offset seismic reflection technique to carry out urban active fault surveys were probed. The results show that this technique has the properties of high resolving power, better reconstruction of subsurface structures, and real-time analyzing and interpretation of investigation results on site. This method can be used to quickly locate objects under investigation accurately in the areas with thinner Quaternary overburdens and strong bedrock interface fluctuations.

Estimation of the amount of erosion at unconformities in the last stage of the Eocene Sanduo period in the Subei Basin,China

Strata erosion is a widespread phenomenon in sedimentary basins. The generation, migration, and accumulation of hydrocarbon is influenced by the scale of erosion, so estimating the amount of erosion is essential in the analysis of oil and gas bearing basins. According to the geological features in the Subei Basin and the actual data, using the integrated method, we estimated the level of erosion at the unconformities caused by the Sanduo event. By using the mudstone interval transit time method and the vitrinite reflectance method on data from typical wells, it can be concluded that the Gaoyou, Jinhu, and Hongze depressions suffered strong strata erosion from the late Eocene to Oligocene, and the total strata erosion thickness was 300–1,100 m. Different tectonic units in the same depression have extremely uneven erosion intensity: the low convex regions have the maximum erosion thickness, amounting to 800–1,100 m; the slope regions have an erosion thickness of generally 600–800 m; the erosion thickness of the slope-hollow transition zone is 300–500 m. For the whole basin, we used the strata thickness trend analysis method combined with the interval transit time and vitrinite reflectance methods to estimate the erosion thickness in the Sanduo period. The results show that the most severe erosion of the Sanduo event in the Subei Basin is between 1,000 m to 1,200 m, mainly located in depressions around the Jianhu Uplift; the deep hollow area has the least erosion, generally about 300–600 m, and the erosion in the slope area is about 600–900 m. Compared with the northern part, the southern part has relatively little erosion. It is also proved that the Sanduo movement has heterogeneous intensity, and the western region has greater intensity than the eastern region.

Evaluation of parameters affecting reflection cracking in geogrid-reinforced overlay

The influence of the most important parameters on the service life of reinforced asphalt overlay with geogrid materials in bending mode was examined by employing the Taguchi method and analysis of variance techniques. The objectives of this experiment was to investigate the effects of grid stiffness, tensile strength, coating type, amount of tack coat, overlay thickness, crack width and stiffnesses of asphalt overlay and existing asphalt concrete on propagation of the reflection cracking. Results indicate that the stiffnesses of cracked layer and overlay are the main significant factors that can directly improve the service life of an overlay against the reflection cracking. Generally, glass grid is more effective in reinforced overlay than polyester grid. Effect of crack width of the existing layer is significant when its magnitude increases from 6 to 9 mm.

Dynamics of Knowledge in Software Project Development Environments: An Approach Using Affiliation Networks

This work presents an approach to study the diffusion of knowledge in software development project teams based on the formation of complex social network structures in a public organization that offers information and communication technology services. We collected historical data on the allocation and records of hours worked by people in projects to build an affiliation network. We applied the method of reflections to analyze the data obtained. The constructed model enabled the description of the participation of project team members from the perspective of the creation and diffusion of knowledge in affiliation networks that describe the participation of people in projects, mediated by the knowledge and the capabilities developed for the execution of these projects. A contribution of this work is the construction of indicators related to the process of creation and diffusion of knowledge in the context of the execution of software development and maintenance projects, based on the concepts of diversification and ubiquity applied to the process of knowledge diffusion;an additional contribution is the presentation of an application of the method of reflections in an organizational context applied to the creation and diffusion of knowledge. We found that the application of management models associated with the collaborative method applied to the project development process contributed to the joint growth of diversified and more specialized knowledge alongside the knowledge considered more generic and ubiquitous. Our results show that contrary to previous expectations based on assumptions established at the beginning of the study, we concluded that in six of the seven subnetworks obtained in the period between 2007 and 2013, knowledge based on complex and diversified capabilities showed a growth proportional to the growth of knowledge related to the capabilities necessary to more general and ubiquitous activities.

Construction of AFLT States by Reflection Method and Recursion Formula

The AFLT states|PY1,Y2has reflection symmetry,Sn|PY1,Y2=|PY2,Y2,nb=2P,where S is the screening charge.AFLT state can be constructed using this reflect symmetry.We propose a recursion formula for this construction.The recursion formula is factorized completely.

ESTIMATION OF DIRECTIONAL SPECTRUM AND REFLECTED COEFFICIENT OF INCIDENT AND REFLECTED WAVE IN PHASE-LOCKED WAVE FIELD

This paper analyses and compares the property of the Modified Bayesian Directional spectrum analysis Method （MBDM） and the Modified Maximum Lkelihood Method （MMLM） that can he used to estimate directional spectrum and reflected coefficient of phase-locked wave field overlapped by multi directional irregular incident and reflected waves. The numerical test verifies the results under different wave conditions, different measurement systems, and different reflection features. The computation speed and stability of the two methods is also compared. The analysis addresses that the MBDM is better than the MMLM for directional spectrum estimating, while the MMLM is better than the MBDM for reflected coefficient estimation and calculating speed and stability.

AN INVERSION METHOD FOR OBTAINING BOTTOM REFLECTION LOSS

A method for the inversion of the transmission losses for the bottom reflection loss is proposed on the basis of the theory of the smooth- averaged sound field. The procedure of the inversion is based on the criterion of the least square error in the transmission losses between calculation and measurement. By using the Gauss - Newton iterative approach, the non - linear least square aloqrithm is equivalent to solving a sequence of lineared least square problems. The physical causes of the instability of the inversion problem are discussed and the stability is improved by means of the Levenberg- Marquardt method. Both numerical simulations with noise and experimental results show that the inversion for the bottom reflection loss of small grazing angle has high precision and the certain perturbation in the measured transmission losses does not lead to serious deviation in the inversion result of the bottom reflection loss.

Analysis of shock wave reflection from fixed and moving boundaries using a stabilized particle method

In the present paper, the efficiency of an enhanced formulation of the stabilized corrective smoothed particle method （CSPM） for simulation of shock wave propagation and reflection from fixed and moving solid boundaries in compressible fluids is investigated. The Lagrangian nature and its accuracy for imposing the boundary conditions are the two main reasons for adoption of CSPM. The governing equations are further modified for imposition of moving solid boundary conditions. In addition to the traditional artificial viscosity, which can remove numerically induced abnormal jumps in the field values, a velocity field smoothing technique is introduced as an efficient method for stabilizing the solution. The method has been implemented for one- and two-dimensional shock wave propagation and reflection from fixed and moving boundaries and the results have been compared with other available solutions. The method has also been adopted for simulation of shock wave propagation and reflection from infinite and finite solid boundaries.

Improve the Statistical Methods for True Reflection of the Trade Balance

Trade deficit has provided international trade protection forces with a grand excuse. e US and EU sides are prone to either imposing anti-dumping on China, or demanding revaluation of the Renminbi (RMB) under the pretext of trade deficit. Many businessmen claimed that they have suffered great losses whenever trade deficit is mentioned.

Method and Reading:Reflections on Confucius and Chinese philosophy

There are some scholars who claim Chinese philosophy isn’t a genuine philosophy,and even if it is,they say,it is either too simple or too hard to understand.You will hear similar opinions not only in Europe but also in China.In this article,I don’t want to examine whether cases like these are only matters of opinion or fact.Instead,

Cloud Parameters Retrieved by the Bispectral Reflectance Algorithm and Associated Applications

Retrieval of cloud parameters is fundamental for descriptions of the cloud process in weather and cloud models, and is also the base for theoretical and applicational investigations on weather modification, aerosol- cloud-precipitation interaction, cloud-radiative climate effects, and so on. However, it is still difficult to ob- rain full information of cloud parameters over a wide area under the current level of science and technology. Luckily, parameters at the top of clouds can be retrieved with the satellite spectrum remote sensing, which is useful in obtaining global cloud properties. In this paper, cloud parameters retrieved by the bispectral reflectance （BSR） method and other methods developed on the basis of the BSR are briefly summarized. Recent advances in studies on the indirect effects of aerosol on cloud parameters are reviewed. The rela- tionships among cloud parameters and precipitation intensity, type, and structure are elaborated on, based upon the pixel-level merged datasets derived from daily measurements of precipitation radar and visible and infrared scanner, together with cloud parameters retrieved by the BSR. It is revealed that cloud particle effective radius and liquid water path near cloud tops are effective to identify the thickness and intensity of convective precipitating clouds. Furthermore, the differences in cloud parameters and precipitation intensity for precipitating and non-precipitating clouds over land and ocean are compared in this paper.