Analyzing Bandwidth on the Microwave Absorber by the Interface Reflection Model

Metallic flaky sendust particles are prepared for use as fillers in electromagnetic attenuation composites. We report the interface reflection model to divide the broad bandwidth into electromagnetic loss and quarter-wavelength （λ/4） cancelation. Combining with the face reflection calculation, we identify the electromagnetic loss originated from skin effect, which is used to explain over half of the absorbed energy in high frequency band. Most impor- tantly, the unique electromagnetic loss cannot generate the reflection loss （RL） peak. Using the phase relation of face reflection, we show evidence that the λ/4 cancelation is vital to generate the RL peak. The calculated energy loss agrees well with the experimental data and lays the foundation for further research.

Analysis of restriction factors of widening diffraction bandwidth of multilayer dielectric grating

In order to design a multilayer dielectric grating with wide-bandwidth diffraction spectrum, the restriction factors of both the reflection bandwidth of multilayer dielectric high-reflectivity mirror and the guided-mode resonance phe- nomenon are studied in detail. The reflection characteristics of high-reflectivity mirror in zeroth and -lst transmitted diffraction orders are quantitatively evaluated. It is found that the reflection bandwidth of high-reflectivity mirror in -lst transmitted diffraction order, which determines the final diffraction bandwidth of multilayer dielectric grating, is evidently compressed. Furthermore, it is demonstrated that the reducing of grating period is an effective approach to the elimination of guided mode resonance over a required broad band range both spectrally and angularly. In addition, the expressions for calculating the maximum period ensuring no guided mode resonance in the required bandwidth are derived. Finally, two high-efficiency pulse-compression gratings with broad-band are presented.

Numerical Simulation of Bragg Reflection Based on Linear Waves Propagation over A Series of Rectangular Seabed

A numerical model, Evolution Equation of Mild-Slope Equation （EEMSE） developed by Hsu et al. （2003）, was applied to study the Bragg reflection of water waves over a series of rectangular seabed. Three key parameters of the Bragg reflection including the peak coefficient of primary Bragg reflection, its corresponding relative wavelength, and the bandwidth, have shown to be effective in describing the characteristics of the primary Bragg reflection. The characteristics of the Bragg reflection were investigated under the various conditions comprising number, height, and spacing interval of a series of rectangular seabed. The results reveal that the peak of Bragg reflection increases with the increase of rectangular seabed height and number, the bandwidth and the shift value of the Bragg reflection depend on the increase of the rectangular seabed height as well as the decrease of rectangular seabed number, and the relative rectangular seabed spacing in the rang of 3 and 4 could produce higher Bragg reflection. Finally, a correlative and regressive analysis is performed by use of the calculated data. Based on the results of the analysis, empirical equations were established. Our study results can provide an appropriate choice of a series of rectangular seabed field for a practical design.

Single-layer broadband planar antenna using ultrathin high-efficiency focusing metasurfaces

Phase gradient metasurfaces（PGMS） offer a fascinating ability to control the amplitude and phase of the electromagnetic（EM） waves on a subwavelength scale, resulting in new applications of designing novel microwave devices with improved performances. In this paper, a reflective symmetrical element, consisting of orthogonally I-shaped structures, has been demonstrated with an approximately parallel phase response from 15 GHz to 22 GHz, which results in an interesting wideband property. For practical design, a planar antenna is implemented by a well-optimized focusing metasurface and excited by a self-designed Vivaldi antenna at the focus. Numerical and experimental results coincide well. The planar antenna has a series of merits such as a wide 3-d B gain bandwidth of 15–22 GHz, an average gain enhancement of 16 d B, a comparable aperture efficiency of better than 45% at 18 GHz, and also a simple fabrication process. The proposed reflective metasurface opens up a new avenue to design wideband microwave devices.

High-reflectivity high-contrast grating focusing reflector on silicon-on-insulator wafer

A high-contrast grating（HCG） focusing reflector providing phase front control of reflected light and high reflectivity is proposed and fabricated.Basic design rules to engineer this category of structures are given in detail.A 1550 nm TM polarized incident light of 11.86 mm in focal length and 0.8320 in reflectivity is obtained in experiment.The wavelength dependence of the fabricated HCGs from 1530 nm to 1580 nm is also tested.The test results show that the focal length is in the range of 11.81-12 mm,which is close to the designed focal length of 15 mm.The reflectivity is almost above 0.56 within a bandwidth of 50 nm.At a distance of 11.86 mm,the light is focused to a round spot with the highest concentration,which is much smaller than the size of the incident beam.The FWHM of the reflected light beam decreases to 120 nm,and the intensity increases to 1.18.