The Regional and Industrial Effects of FDI on Chinese Manufacturing Sector

This paper investigates the regional and industrial effects of FDI on Chinese manufacturing sector since China entered WTO. We find that FDI plays a different role in the development of different areas and industries through a comparison with state-controlled industrial enterprises in China. More establishments of smaller foreign funded enterprises and less foreign capital with a high level of management should promote the competition to stimulate manufacturing growth in eastern area, while fewer establishments of foreign funded enterprises with a large capital should make a great stimulus to the western manufacturing development. Both foreign capital and the establishment of foreign industrial enterprises have a great effect on the whole manufacturing sector by industry.

Conclusions on the Implementation of Regulation of the National Significant Seismic Monitoring and Protection Regions from 1996 to 2012 in the Chinese Mainland

The regulation of the National Significant Seismic Monitoring and Protection Regions(NSSMPR for short) is defined by the Law of the Peoples Republic of China on Protecting Against and Mitigating Earthquake Disasters.The first stage of implementation of the regulation of NSSMPR in the Chinese mainland was finished from 1996 to 2005.The second stage is being carried on from 2006 to 2020.With the support of the National Social Science Foundation,this paper follows up and evaluates the implementation of the regulation of NSSMPR from 1996 to 2012 in the Chinese mainland.Based on analysis of earthquake examples and investigation data,we find that the effect of disaster mitigation is good,and on this basis,some suggestions are proposed to improve the regulation of NSSMPR.

The K Method for Estimating Earthquake Activity Parameters and Effect of the Boundary Uncertainty of the Source Region:Discussion on the Seismic Zoning Method

Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.

Individual-tree diameter growth model for Korean pine plantations based on optimized interpolation of meteorological variables

To explore the influence of meteorological variables on the growth of Korean pine(Pinus koraiensis Sieb.et Zucc.) plantations and provide a scientific reference for the production and management of Korean pine,three approaches to interpolate meteorological variables during the growing season(i.e.,May-September) were compared in Heilongjiang Province,China.Optimized meteorological variable interpolation results were then combined with stand and individual tree variables,based on data from 56 sample plots and 2886 sample trees from Korean pine plantations in two regions of the province to develop an individualtree diameter growth model(Model I) and an individualtree diameter growth model with meteorological variables(Model Ⅱ) using a stepwise regression method.Moreover,an individual-tree diameter growth model with regional effects(Model Ⅲ) was developed using dummy variables in the regression,and the significance of introducing these dummy variables was verified with an F-test statistical analysis.The models were validated using an independent data set,and the predictive performance of the three models was assessed via the adjusted coefficient of determination(R_(a)^(2)) and root mean square error(RMSE).The results suggest that the growth increment in tree diameter of Korean pine plantations was significantly correlated with the natural logarithm of initial diameter(ln D),stand basal area(BAS),logarithmic deformation of the stand density index(ln SDI),ratio of basal area of trees larger than the subject tree to their initial diameter at breast height(DBH)(BAL/D),and the maximum growingseason precipitation(Pgmax).The individual-tree diameter growth models of Korean pine plantations developed in this study will provide a good basis for estimating and predicting growth increments of Korean pine forests over larger areas.

Incorporating topographic factors in nonlinear mixed-effects models for aboveground biomass of natural Simao pine in Yunnan,China

A total of 128 Simao pine trees （Pinus kesiya var. langbianensis） from three regions of Pu＇er City, Yunnan Province, People＇s Republic of China, were destructively sampled to obtain tree aboveground biomass （AGB）. Tree variables such as diameter at breast height and total height, and topographical factors such as altitude, aspect of slope, and degree of slope were recorded. We considered the region and site quality classes as the ran- dom-effects, and the topographic variables as the fixed- effects. We fitted a total of eight models as follows： least- squares nonlinear models （BM）, least-squares nonlinear models with the topographic factors （BMT）, nonlinear mixed-effects models with region as single random-effects （NLME-RE）, nonlinear mixed-effects models with site as single random-effects （NLME-SE）, nonlinear mixed-ef- fects models with the two-level nested region and site random-effects （TLNLME）, NLME-RE with the fixed-ef- fects of topographic factors （NLMET-RE）, NLME-SE with the fixed-effects of topographic factors （NLMET-SE）, and TLNLME with the fixed-effects of topographic factors （TLNLMET）. The eight models were compared by modelfitting and prediction statistics. The results showed： model fitting was improved by considering random-effects of region or site, or both. The models with the fixed-effects of topographic factors had better model fitting. According to AIC and BIC, the model fitting was ranked as TLNLME 〉 NLMET-RE 〉 NLME-RE.〉 NLMET-SE 〉 TLNLMET 〉 NLME-SE 〉 BMT 〉 BM. The differences among these models for model prediction were small. The model pre- diction was ranked as TLNLME 〉 NLME-RE 〉 NLME- SE 〉 NLMET-RE 〉 NLMET-SE 〉 TLNLMET 〉 BMT 〉 BM. However, all eight models had relatively high prediction precision （〉90 %）. Thus, the best model should be chosen based on the available data when using the model to predict individual tree AGB.

Combining CLUE-S and SWAT Models to Forecast Land Use Change and Non-point Source Pollution Impact at a Watershed Scale in Liaoning Province, China

Non-point source(NPS) pollution has become a major source of water pollution. A combination of models would provide the necessary direction and approaches designed to control NPS pollution through land use planning. In this study, NPS pollution load was simulated in urban planning, historic trends and ecological protection land use scenarios based on the Conversion of Land Use and its Effect at Small regional extent(CLUE-S) and Soil and Water Assessment Tool(SWAT) models applied to Hunhe-Taizi River Watershed, Liaoning Province, China. Total nitrogen(TN) and total phosphorus(TP) were chosen as NPS pollution indices. The results of models validation showed that CLUE-S and SWAT models were suitable in the study area. NPS pollution mainly came from dry farmland, paddy, rural and urban areas. The spatial distribution of TN and TP exhibited the same trend in 57 sub-catchments. The TN and TP had the highest NPS pollution load in the western and central plains, which concentrated the urban area and farm land. The NPS pollution load would increase in the urban planning and historic trends scenarios, and would be even higher in the urban planning scenario. However, the NPS pollution load decreased in the ecological protection scenario. The differences observed in the three scenarios indicated that land use had a degree of impact on NPS pollution, which showed that scientific and ecologically sound construction could effectively reduce the NPS pollution load in a watershed. This study provides a scientific method for conducting NPS pollution research at the watershed scale, a scientific basis for non-point source pollution control, and a reference for related policy making.

Analysis of the negative effects of groundwater exploitation on geological environment in Asia

This paper summarizes the negative effects on geological environment caused by groundwater exploitation and its distribution. There are seven main types of the geological environment negative effects, which are generally as follows:(1) Constant decrease of groundwater level is mainly distributed in China(East Asia), India(South Asia), Tajikistan(Central Asia) and Saudi Arabia(West Asia);(2) land subsidence occurs mainly in eastern plains of East Asia and west Siberian Plain of North Asia;(3) seawater intrusion occurs mainly in China, Japan and South Korea in East Asia, Philippines and Indonesia in Southeast Asia, the Indian coastal areas in South Asia;(4) groundwater level decline caused by groundwater exploitation in oil fields;(5) mining collapse is mainly in 50° to 70° north latitude band;(6) the total area of karst collapse in China of East Asia is as much as 197.05 km^2; and(7) ground fracture is mainly distributed in the North China Plain, Fenwei Plain and the Yangtze River Delta. Asia can be divided into 6 zones in terms of the geological environment negative effect caused by groundwater exploitation. According to analysis, with the increasing intensity of human activities, geological environment issues become more and more serious, therefore it is vital to control the human activities within the scope of 5× 10~5 people/km^2 to 9.9× 10~5 people/km^2 for the effective control of the size of the affected area by geological environment problems.

GPU-based discrete element simulation on flow stability of flat-bottomed hopper

In this study, the flow stability of the flat-bottomed hopper was investigated via GPU-based discrete element method(DEM) simulation. With the material height inside the hopper reducing, the fluctuation of the flow rate indicates an unstable discharge. The flow regions of the unstable discharge were compared with that of the stable discharge, a key transformation zone, where the voidage showed the largest difference between unstable and stable discharge, was revealed. To identify the relevance of the key transformation zone and the hopper flow stability, the voidage variation of the key transformation zone with material height reducing was studied.A sharp increase in the voidage in the key transformation zone was considered to be the standard for judging the unstable hopper flow, and the ‘Top–Bottom effect' of the hopper was defined, which indicated the hopper flow was unstable when the hopper only had the top area and the bottom area, because the voidage of particles in the top area and the bottom area were both variables.

Determinants on Rural-Urban Labor Migration in China:Empirical Analysis on the Effect of Rural Cooperate Medical Insurance based on Cross-Sectional and Longitudinal Data

This paper studies factors influencing rural-urban labor migration in China,particularly the implementation of rural cooperative medical insurance(RCMI) in the year 2003.With the support of data analysis from the year 2000,2004 and 2006,clear linear correlations are found between gender,income,health condition and rural-urban labor flow,whereas the impact of education and employment status are more complicated.More importantly,results from regression show that the establishment of RCMI in countryside of China not only inhibits rural residents from seeking employment outside the village,but also pulls back rural people who have already worked in cities.When regional dimension is concerned,the pure composite effect of RCMI on rural labor flow is less significant in coastal areas with better economic performance and medical service.

Research on the Relationship between Chinese Express Delivery Industry and Economic Development Based on PVAR Model

Based on the panel vector autoregressive model (PVAR) and the panel data of China’s 31 provinces from 2010 to 2019, this paper conducts a quantitative analysis on the dynamic balance relationship between China’s express business volume and economic development status in recent 10 years. The results show that: Firstly, there is a long-term equilibrium relationship between the development level of express industry and the economic development level;Secondly, the relationship between them presents regional heterogeneity (that is, the East, Centre and the West show different characteristics);Finally, in the short term, the development of express delivery industry and economic development can well drive each other, but in the long term, this trend is not obvious, and the economic impact of express delivery industry has a certain lag.

Modeling porous structure of oil-pressboard interface and its effect on electric field distribution

The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.

Assessment of Individual Direct Radiative Effects of Major Aerosol Species in East Asia

To assess individual direct radiative effects of diverse aerosol species on a regional scale, the air quality modeling system RAMS-CMAQ （Regional Atmospheric Modeling System and Community Multiscale Air Quality） coupled with an aerosol optical properties/radiative transfer module was used to simulate the temporal and spatial distributions of their optical and radiative properties over East Asia throughout 2005. Annual and seasonal averaged aerosol direct radiative forcing （ADRF） of all important aerosols and individual components, such as sulfate, nitrate, ammonium, black carbon （BC）, organic carbon （OC）, and dust at top-of-atmosphere （TOA） in clear sky are analyzed. Analysis of the model results shows that the annual average ADRF of all important aerosols was in the range of 0 to -18 W m-z, with the maximum values mainly distributed over the Sichuan Basin. The direct radiative effects of sulfate, nitrate, and ammonium make up most of the total ADRF in East Asia, being concentrated mainly over North and Southeast China. The model domain is also divided into seven regions based on different administrative regions or countries to investigate detailed information about regional ADRF variations over East Asia. The model results show that the ADRFs of sulfate, ammonium, BC, and OC were stronger in summer and weaker in winter over most regions of East Asia, except over Southeast Asia. The seasonal variation in the ADRF of nitrate exhibited the opposite trend. A strong ADRF of dust mainly appeared in spring over Northwest China and Mongolia.

Quantitative measurement of the effects of administrative division adjustments on regional development

Administrative divisions are the important foundation of national governance and social development,and the adjustment of administrative divisions is a critical way to promote regional coordinated development.Under the background of globalization and regionalization,timely adjustment of administrative divisions is a major step to reconstruct the regional development pattern.In the perspective of regional coordinated development,this paper constructs an Administrative Rank Potential Energy(ARPE)model to explore the mechanisms of administrative division adjustment(ADA)under coordinated regional development based on the theory of regional interaction,spatial field energy model and power exponential function.The results show that:(1)The development potential and influence of an administrative region are closely related to the administrative jurisdiction,administrative resources,and the potential of regional coordinated development.(2)The growth rate of ARPE in the study area from 2010 to 2015 was 20.7% compared to the period 2005 to 2010,and the potential for coordinated development increased to 3.05% from 0.21% before the"cancelling"the prefecture-level city of Chaohu.(3)The measurement results of the usefulness of ADA can not only distinguish the complex impacts brought about by social development,but also accord with real social and economic development conditions.The ARPE focuses on the both regional integrated development and individual development,thereby serving as a reference for explaining and evaluating adjustments to administrative divisions at the macro-and micro-scales.

Energy Absorption and Deformation Mechanism of Lotus-type Porous Coppers in Perpendicular Direction

As metallic foams used for energy absorption in the automotive and aerospace industries, recently invented lotus-type porous metals are viewed as potential energy absorbers. Yet, solid conclusion on their eligibility as energy absorbers is still in question, particularly when compression is in the direction perpendicular to the axial orientation of cylindrical pores. In this work, the energy absorption of lotus-type porous coppers in the perpendicular direction is investigated at strain rates from 0.001 s^（-1） to^2400 s^（-1）. The energy absorption capacity and the energy absorption efficiency are calculated to be4–16 k J/kg and 0.32–0.7, respectively, slightly inferior to metal foams and the same porous solid compressed in the parallel direction due to the shortened extent of the plateau stress region. The deformation mechanism is examined experimentally in conjunction with finite element modeling. Both suggest that gradual squeeze and collapse of pores are the mechanisms accommodating the energy absorption. The deformation is generally evenly distributed over pore ligaments and independent of strain rate.