Real-time digital image stabilization based on regional field image gray projection

Digital image stabilization technique plays important roles in video surveillance and object acquisition.Many useful electronic image stabilization algorithms have been studied.A real-time algorithm is proposed based on field image gray projection which enables the regional odd and even field image to be projected into x and y directions and thus to get the regional gray projection curves in x and y directions,respectively.For the odd field image channel,motion parameters can be estimated via iterative minimum absolute difference based on two successive field image regional gray projection curves.Then motion compensations can be obtained after using the Kalman filter method.Finally,the odd field image is adjusted according to the compensations.In the mean time,motion compensation is applied to the even field image channel with the odd field image gray projection curves of the current frame.By minimizing absolute difference between odd and even field image gray projection curves of the current frame,the inter-field motion parameters can be estimated.Therefore,the even field image can be adjusted by combining the inter-field motion parameters and the odd field compensations.Finally,the stabilized image sequence can be obtained by synthesizing the adjusted odd and even field images.Experimental results show that the proposed algorithm can run in real-time and have a good stabilization performance.In addition,image blurring can be improved.

Soil Geochemistry Changes Induced by a Foreign Soil Reconstruction Project in Three Gorges Reservoir Region of China

Fertile topsoil was added onto the surface of barren slope land in Three Gorges Reservoir region of China in an anthropogenic process known as the foreign soil reconstruction project. The main goal of this paper was to reveal the influence of anthropogenic activities on pedogenic processes and soil classifications. Chemical weathering indices and comparative analysis were applied to discuss changes in geochemical compositions and weathering features of purplish soils(Cambisols) before and after the project. Results showed that:(1) The foreign soil reconstruction project slightly altered the major element composition of topsoil and improved the soil structure. Although the distributions of major elements in the original topsoil, original subsoil, foreign topsoil and newly constructed topsoil were all similar to that in upper continental crust, newly constructed topsoil was the most similar soil.(2) The chemical index of alteration was more sensitive than the weathering index of Parker at indicating chemical weathering status of purplish soil. The chemical weathering status of newly constructed topsoil was higher than that of the original topsoil and lower than that of foreign topsoil.(3) Anthropogenic activities may provide a promising new thought for the anthropogenic soil classification system. The scope and subgroups of Anthrosols should be extended and strengthened. Or there may be a need to combine Anthrosols and Technosols orders to create a new soil order. The results may be used for optimizing soil mellowing engineering activities and enriching the soil classification system.

20 Years of the SCO:Development,Experience and Future Direction

The Shanghai Cooperation Organization(SCO)has withstood storms to create a cooperative platform in Central Asia that conforms to the trend of the times,meets regional needs,and serves its member states’interests.SCO’s commitment to innovative thinking,security cooperation and regional coordination has contributed to regional stability and development and to gaining experience for establishing regional and global order.China-Russia cooperation,efforts by the“Shanghai Five,”relations among member states,and external pressure have been the main driving forces supporting a huge increase in trade in the past 20 years.For regional development and stability and a greater role in global governance,the SCO should continue taking the long-term perspective in planning and policy.

Process and cause of urban-rural development transformation in the Bohai Rim Region, China

China＇s reform and opening-up policy has brought the country a great development opportunity. The high-speed growth of the economy not only led China to a period of industrialization, urbanization, informatization and agricultural modernization, but also exacerbated the situation of the urban–rural dual structure. Based on the review of current studies, we first used the analytic hierarchy process（AHP） method to evaluate the urban–rural development and transformation level by population transformation index, land transformation index, industrial transformation index and social transformation index between 1996 and 2012 around the Bohai Rim Region. Then, based on the results of each index, we used the exploratory spatial data analysis（ESDA） method to investigate the spatial autocorrelation of the change in the urban–rural development transformation index during the 16-year period using Global Moran＇s I index and Local Moran＇s I index. Finally, we investigated the mechanism of change of the urban–rural development transformation index at county level, summarizing five main factors：（1） the radiation from the surrounding big cities,（2） the acceleration of the urbanization process,（3） the upgrading of the industrial structure,（4） the publishing and implementation of a macro development strategy and regional policy, and（5） natural factors such as topology.

Effects of the Physical Process Ensemble Technique on Simulation of Summer Precipitation over China

The effects of the physical process ensemble technique on simulation of summer precipitation over China have been studied by using a p-σregional climate model with 9 vertical levels（pσ-RCM9）.The results show that there are obvious differences among simulations of summer precipitation over China from different individual ensemble members.The simulated precipitation over China is sensitive to different cumulus convection,radiative transfer,and land surface process parameterizations.These differences lead to large uncertainties in the simulation results.The standard deviation of the simulated summer precipitation departure percentage over West China is larger than that over East China,signifying that the simulated precipitation over East China has higher reliability and consistency than that over West China.The Talagr and diagram shows that the ensemble system has reasonable dispersion in the simulated summer mean precipitation over East China.The summer ensemble mean precipitation over East China evaluated by various indices is better than most single simulations.The physical process ensemble technique reduces the uncertainties of the model physics in precipitation and improves the simulation results as a whole.Further, adopting the optimized ensemble mean method can obviously improve the performance of the pσ-RCM9 model in simulation of summer precipitation over East China.

Improving the process forming limit considering forming defects in the transitional region in local loading forming of Ti-alloy rib-web components

The isothermal local loading forming technology provides a feasible way to form Ti-alloy large-scale rib-web components in aerospace and aviation fields.However,the local loading process forming limit is restricted by forming defects in the transitional region.In this work,the feasibility of controlling forming defects and improving the process forming limit by adjusting die parameters is explored through finite element（FE） simulation.It is found that the common cavum and folding defects in the transitional region are significantly influenced by the fillet radii of left rib and middle rib,respectively.The cavum and folding defects can be effectively controlled by increasing the fillet radii of left rib and middle rib,respectively.The process forming limits considering forming defects in the transitional region are determined by the stepwise searching method under various die parameters.Moreover,the relationship between the process forming limit and die parameters is developed through the response surface methodology（RSM）.The developed RSM models suggest that increasing the fillet radii of left and middle ribs is effective to improve the process forming limit during local loading forming of rib-web components.The results will provide technical basis for the design of die parameters and the reduction amount,which is of great importance to control forming defects and improve the process forming limit in local loading forming of Ti-alloy large-scale rib-web components.