CUTTING REGULARITY AND DISCHARGE CHARACTERISTICS BY USING COMPOSITE COOLING LIQUID IN WIRE CUT ELECTRICAL DISCHARGE MACHINE WITH HIGH WIRE TRAVELING SPEED

The analysis of cutting regularity is provided through using and comparing two typical cooling liquids. It is proved that cutting regularity is greatly affected by cooling liquid＇s washing ability. Discharge characteristics and theoretic analysis between two electrodes are also discussed based on discharge waveform. By using composite cooling liquid which has strong washing ability, the efficiency in the first stable cutting phase has reached more than 200 mm^2/min, and the roughness of the surface has reached Ra〈0.8 μm after the fourth cutting with more than 50 mm^2/min average cutting efficiency. It is pointed out that cutting situation of the wire cut electrical discharge machine with high wire traveling speed （HSWEDM） is better than the wire cut electrical discharge machine with low wire traveling speed （LSWEDM） in the condition of improving the cooling liquid washing ability. The machining indices of HSWEDM will be increased remarkably by using the composite cooling liquid.

Adsorption Regularity and Characteristics of sp^3-Hybridized Gas Molecules on Anatase TiO_2(101) Surface

We report the anatase titanium dioxide （101） surface adsorption of sp3-hybridized gas molecules, including NH3, 1-12 0 and CH4, using first-principles plane-wave ultrasoft pseudopotential based on the density functional theory. The results show that it is much easier for a surface with oxygen vacancies to adsorb gas molecules than it is for a surface without oxygen vacancies. The main factor affecting adsorption stability and energy is the polarizability of molecules, and adsorption is induced by surface oxygen vacancies of the negatively charged center. The analyses of state densities and charge population show that charge transfer occurs at the molecule surface upon adsorption and that the number of transferred charge reduces in the order of N, 0 and C. Moreover, the adsorption method is chemical adsorption, and adsorption stability decreases in the order of NH3, tt2 0 and CH4. Analyses of absorption and reflectance spectra reveal that after absorbed CH4 and H2 O, compared with the surface with oxygen vacancy, the optical properties of materials surface, including its absorption coefficients and reflectivity index, have slight changes, however, absorption coefficient and reflectivity would greatly increase after NH3 adsorption. These findings illustrate that anatase titanium dioxide （101） surface is extremely sensitive to NH3.

A study of the strong pulses detected from PSR B0656+14 using the Urumqi 25-m radio telescope at 1540 MHz

We report on the properties of strong pulses from PSR B0656＋14 by analyzing the data obtained using the Urumqi 25-m radio telescope at 1540 MHz from August 2007 to September 2010.In 44 h of observational data,a total of 67 pulses with signal-to-noise ratios above a 5σthreshold were detected.The peak flux densities of these pulses are 58 to 194 times that of the average profile,and their pulse energies are 3 to 68 times that of the average pulse.These pulses are clustered around phases about 5-ahead of the peak of the average profile.Compared with the width of the average profile,they are relatively narrow,with the full widths at half-maximum ranging from 0.28 ° to 1.78 °.The distribution of pulse-energies follows a lognormal distribution.These sporadic strong pulses detected from PSR B0656＋14 have different characteristics from both typical giant pulses and its regular pulses.