Rockfall disasters can result in damages to various structures such as highways and buildings.Ground reinforced embankments(GRE) are one of the barrier types used to prevent rockfall. GRE absorb the impact energy of t...Rockfall disasters can result in damages to various structures such as highways and buildings.Ground reinforced embankments(GRE) are one of the barrier types used to prevent rockfall. GRE absorb the impact energy of the hitting rock blocks by the movement of fine soil particles triggered by the penetration of the rock in the soil. In this process,stresses in the wall are distributed in both the transverse and longitudinal directions. GREs on the valley slopes can be hundreds of meters long, so such structures cause difficulty in transition to valley slope behind the embankments. Especially, access to areas such as agricultural, pasture or forest lands behind the GRE becomes a challenge. The current paper presents the design of passageways in GRE using the finite element method to provide safe corridors at several different parts within the hundreds of meters long structures. A total of 4 different passageway designs for GRE were developed. Each finite element model was subjected to rockfall with different kinetic energies of 500, 1000 and 3000kJ. The obtained results showed that 44% increase in structure volume increased the impact capacity from 500 kJ to 3000kJ.Furthermore, the critical displacement caused by rockfall impact with an energy of 3000 kJ was reduced by 31%. It was determined that the support applied with the reinforced concrete wall did not reach the desired energy absorption value due to its rigid structure, and even collapsed at 3000 kJ.展开更多
The stability and seismic behavior of geosynthetic-reinforced embankments during the earthquake is not well known.In this paper,the damage types of embankments were summarized,and the seismic stability of reinforced e...The stability and seismic behavior of geosynthetic-reinforced embankments during the earthquake is not well known.In this paper,the damage types of embankments were summarized,and the seismic stability of reinforced embankment were analyzed through an earthquake damage investigation in the Wenchuan earthquake region.Then,large-scale shaking table model tests were performed on the geosynthetic-reinforced embankment.The results show that the damage level of the reinforced embankment was almost less than that of the unreinforced embankment.The peak seismic earth pressure was nonlinear along the height of the embankment,the largest peak seismic earth pressure was roughly in the middle of the embankment slope.The peak ground accelerations(PGA)amplification factor first showed an increasing pattern and then a decreasing pattern with the increase of elevation,but there was a final increasing trend along the height of the reinforced embankment.The results can help to establish the proper design of the reinforcement embankments under earthquake conditions.展开更多
In order to investigate the seismic performance of geosynthetic reinforced and pile supported(GRPS) embankment under seismic loads, an input method for three-dimensional oblique incidence of P wave was proposed. This ...In order to investigate the seismic performance of geosynthetic reinforced and pile supported(GRPS) embankment under seismic loads, an input method for three-dimensional oblique incidence of P wave was proposed. This method is based on the explicit finite element method while considering the viscous-spring artificial boundary(VSAB) condition. Using the proposed method, a numerical study was conducted, and the influence of oblique incidence on the seismic response of GRPS embankment under the oblique incident P waves was analyzed. The results indicate that in comparison with vertical incidence, the oblique incidence can significantly increase the displacement, velocity and acceleration of key locations in the GRPS embankment. The existence of geosynthetics can alleviate the impact of seismic load on the response of the embankment to a certain degree. Moreover, the number of reinforcement layers and modulus of geogrid also greatly influence the seismic performance of GRPS embankment.展开更多
文摘Rockfall disasters can result in damages to various structures such as highways and buildings.Ground reinforced embankments(GRE) are one of the barrier types used to prevent rockfall. GRE absorb the impact energy of the hitting rock blocks by the movement of fine soil particles triggered by the penetration of the rock in the soil. In this process,stresses in the wall are distributed in both the transverse and longitudinal directions. GREs on the valley slopes can be hundreds of meters long, so such structures cause difficulty in transition to valley slope behind the embankments. Especially, access to areas such as agricultural, pasture or forest lands behind the GRE becomes a challenge. The current paper presents the design of passageways in GRE using the finite element method to provide safe corridors at several different parts within the hundreds of meters long structures. A total of 4 different passageway designs for GRE were developed. Each finite element model was subjected to rockfall with different kinetic energies of 500, 1000 and 3000kJ. The obtained results showed that 44% increase in structure volume increased the impact capacity from 500 kJ to 3000kJ.Furthermore, the critical displacement caused by rockfall impact with an energy of 3000 kJ was reduced by 31%. It was determined that the support applied with the reinforced concrete wall did not reach the desired energy absorption value due to its rigid structure, and even collapsed at 3000 kJ.
基金supported by the Key Research Project of China(Grant No.2016YFC0802206)the Sichuan Science and Technology Program(Grant No.2019YFG0001,20GJHZ0205)+1 种基金the open research fund of MOE Key Laboratory of High-speed Railway Engineering,Southwest Jiaotong UniversityDoctoral Innovation Fund Program of Southwest University of Science and Technology(Grant No.16zx7123)
文摘The stability and seismic behavior of geosynthetic-reinforced embankments during the earthquake is not well known.In this paper,the damage types of embankments were summarized,and the seismic stability of reinforced embankment were analyzed through an earthquake damage investigation in the Wenchuan earthquake region.Then,large-scale shaking table model tests were performed on the geosynthetic-reinforced embankment.The results show that the damage level of the reinforced embankment was almost less than that of the unreinforced embankment.The peak seismic earth pressure was nonlinear along the height of the embankment,the largest peak seismic earth pressure was roughly in the middle of the embankment slope.The peak ground accelerations(PGA)amplification factor first showed an increasing pattern and then a decreasing pattern with the increase of elevation,but there was a final increasing trend along the height of the reinforced embankment.The results can help to establish the proper design of the reinforcement embankments under earthquake conditions.
基金Projects(41202220,41472278,51478438)supported by the National Natural Science Foundation of ChinaProjects(20120022120003,20134101120009)supported by the Research Fund for the Doctoral Program of Higher Education,China+1 种基金Project(2652012065)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(14A560014)supported by the Key Project of Education Department in Henan Province,China
文摘In order to investigate the seismic performance of geosynthetic reinforced and pile supported(GRPS) embankment under seismic loads, an input method for three-dimensional oblique incidence of P wave was proposed. This method is based on the explicit finite element method while considering the viscous-spring artificial boundary(VSAB) condition. Using the proposed method, a numerical study was conducted, and the influence of oblique incidence on the seismic response of GRPS embankment under the oblique incident P waves was analyzed. The results indicate that in comparison with vertical incidence, the oblique incidence can significantly increase the displacement, velocity and acceleration of key locations in the GRPS embankment. The existence of geosynthetics can alleviate the impact of seismic load on the response of the embankment to a certain degree. Moreover, the number of reinforcement layers and modulus of geogrid also greatly influence the seismic performance of GRPS embankment.