Experimental investigation of engineered geopolymer composite for structural strengthening against blast loads

The recent increase in blast/bombing incidents all over the world has pushed the development of effective strengthening approaches to enhance the blast resistance of existing civil infrastructures.Engineered geopolymer composite(EGC)is a promising material featured by eco-friendly,fast-setting and strain-hardening characteristics for emergent strengthening and construction.However,the fiber optimization for preparing EGC and its protective effect on structural elements under blast scenarios are uncertain.In this study,laboratory tests were firstly conducted to evaluate the effects of fiber types on the properties of EGC in terms of workability,dry shrinkage,and mechanical properties in compression,tension and flexure.The experimental results showed that EGC containing PE fiber exhibited suitable workability,acceptable dry shrinkage and superior mechanical properties compared with other types of fibers.After that,a series of field tests were carried out to evaluate the effectiveness of EGC retrofitting layer on the enhancement of blast performance of typical elements.The tests include autoclaved aerated concrete(AAC)masonry walls subjected to vented gas explosion,reinforced AAC panels subjected to TNT explosion and plain concrete slabs subjected to contact explosion.It was found that EGC could effectively enhance the blast resistance of structural elements in different scenarios.For AAC masonry walls and panels,with the existence of EGC,the integrity of specimens could be maintained,and their deflections and damage were significantly reduced.For plain concrete slabs,the EGC overlay could reduce the diameter and depth of the crater and spallation of specimens.

Shear reinforcement effect of reinforced concrete tie-columns on the lateral resistance of confined masonry walls

Tie-columns improve significantly the lateral resistance of masonry bearing walls against persistent, transient and accidental loads. The research work described herein has been carried out to assess the lateral resistance of confined masonry walls, where contribution of the masonry panel is evaluated according to material mechanics and tie-columns effect is estimated by a proposed analytical formulation based on a model reported on previously. This approach takes into account the effect of dowel support on the reaction of its adjacent shear reinforcement： the conditions for the various contributions of transverse reinforcements are better defined following a clear evaluation of the participation ratio of these reinforcements. Lateral resistances of confined masonry walls measured in full-scale tests and gleaned from the literature are compared and checked with resistances calculated using the present approach.

Numerical modeling of high velocity impact applied to reinforced concrete panel

A numerical simulation of a high-velocity impact of reinforced concrete structures is a complex problem for which robust numerical models are required to predict the behavior of the experimental tests.This paper presents the implementation of a numerical model to predict the impact behavior of a reinforced concrete panel penetrated by a rigid ogive-nosed steel projectile.The concrete panel has dimensions of 675 mm675 mm200 mm,and is meshed using 8-node hexahedron solid elements.The behavior of the concrete panel is modeled using a Johnson-Holmquist damage model incorporating both the damage and residual material strength.The steel projectile has a small mass and a length of 152 mm,and is modeled as a rigid element.Damage and pressure contours are applied,and the kinetic and internal energies of the concrete and projectile are evaluated.We also evaluate the velocity at different points of the steel projectile and the concrete panel under an impact velocity of 540 m/s.