Relative intensity noise(RIN) and high-speed modulation characteristics are investigated for an Al Ga In As/In P hybrid square-rectangular laser(HSRL) with square side length, rectangular length, and width of 15,300, ...Relative intensity noise(RIN) and high-speed modulation characteristics are investigated for an Al Ga In As/In P hybrid square-rectangular laser(HSRL) with square side length, rectangular length, and width of 15,300, and 2 μm, respectively. Single-mode operation with side-mode suppression larger than 40 dB has been realized for the HSRL over wide variation of the injection currents. In addition, the HSRL exhibits a 3 dB modulation bandwidth of 15.5 GHz, and an RIN nearly approaches standard quantum shot-noise limit 2 hv∕P=-164 dB∕Hz at high bias currents due to the strong mode selection of the square microcavity. With the increase of the DC bias current of the Fabry–Perot section, significantly enhanced modulation bandwidth and decreased RIN are observed.Furthermore, intrinsic parameters such as resonance frequency, damping factor, and modified Schawlow–Townes linewidth are extracted from the noise spectra.展开更多
Intracavity absorption spectroscopy is a strikingly sensitive technique that has been integrated with a two-wavelength setup to develop a sensor for human breath.Various factors are considered in such a scenario,out o...Intracavity absorption spectroscopy is a strikingly sensitive technique that has been integrated with a two-wavelength setup to develop a sensor for human breath.Various factors are considered in such a scenario,out of which Relative Intensity Noise(RIN)has been exploited as an important parameter to characterize and calibrate the said setup.During the performance of an electrical based assessment arrangement which has been developed in the laboratory as an alternative to the expensive Agilent setup,the optical amplifier plays a pivotal role in its development and operation,along with other components and their significance.Therefore,the investigation and technical analysis of the amplifier in the system has been explored in detail.The algorithm developed for the automatic measurements of the system has been effectively deployed in terms of the laser’s performance.With this in perspective,a frequency dependent calibration has been pursued in depth with this scheme which enhances the sensor’s efficiency in terms of its sensitivity.In this way,our investigation helps us in a better understanding and implementation perspective of the proposed system,as the outcomes of our analysis adds to the precision and accuracy of the entire system.展开更多
Cascaded random Raman fiber lasers(CRRFLs)have been used as a new platform for designing high power and wavelength-agile laser sources.Recently,CRRFL pumped by ytterbium-doped random fiber laser(YRFL)has shown both hi...Cascaded random Raman fiber lasers(CRRFLs)have been used as a new platform for designing high power and wavelength-agile laser sources.Recently,CRRFL pumped by ytterbium-doped random fiber laser(YRFL)has shown both high power output and low relative intensity noise(RIN).Here,by using a wavelength-and bandwidth-tunable point reflector in YRFL,we experimentally investigate the impacts of YRFL on the spectral and RIN properties of the CRRFL.We verify that the bandwidth of the point reflector in YRFL determines the bandwidth and temporal stability of YRFL.It is found that with an increase in the bandwidth of the point reflector in YRFL from 0.2 nm to 1.4 nm,CRRFL with higher spectral purity and lower RIN can be achieved due to better temporal stability of YRFL pump.By broadening the point reflector’s bandwidth to 1.4 nm,the lasing power,spectral purity,and RIN of the 4th-order random lasing at 1349 nm can reach 3.03 W,96.34%,and–115.19 dB/Hz,respectively.For comparison,the spectral purity and RIN of the 4th-order random lasing with the point reflector’s bandwidth of 0.2 nm are only 91.20%and–107.99 dB/Hz,respectively.Also,we realize a wavelength widely tunable CRRFL pumped by a wavelength-tunable YRFL.This work provides a new platform for the development of ideal distributed Raman amplification pump sources based on CRRFLs with both good temporal stability and wide wavelength tunability,which is of great importance in applications of optical fiber communication and distributed sensing.展开更多
基金National Key R&D Program of China(2016YFB0402304)National Natural Science Foundation of China(NSFC)(61235004,61377105,61527823)
文摘Relative intensity noise(RIN) and high-speed modulation characteristics are investigated for an Al Ga In As/In P hybrid square-rectangular laser(HSRL) with square side length, rectangular length, and width of 15,300, and 2 μm, respectively. Single-mode operation with side-mode suppression larger than 40 dB has been realized for the HSRL over wide variation of the injection currents. In addition, the HSRL exhibits a 3 dB modulation bandwidth of 15.5 GHz, and an RIN nearly approaches standard quantum shot-noise limit 2 hv∕P=-164 dB∕Hz at high bias currents due to the strong mode selection of the square microcavity. With the increase of the DC bias current of the Fabry–Perot section, significantly enhanced modulation bandwidth and decreased RIN are observed.Furthermore, intrinsic parameters such as resonance frequency, damping factor, and modified Schawlow–Townes linewidth are extracted from the noise spectra.
基金This work was supported in part by the German Academic Exchange Service(Deutsche Akademische Austausch Dienst(DAAD)),and in part by the University of Kassel.
文摘Intracavity absorption spectroscopy is a strikingly sensitive technique that has been integrated with a two-wavelength setup to develop a sensor for human breath.Various factors are considered in such a scenario,out of which Relative Intensity Noise(RIN)has been exploited as an important parameter to characterize and calibrate the said setup.During the performance of an electrical based assessment arrangement which has been developed in the laboratory as an alternative to the expensive Agilent setup,the optical amplifier plays a pivotal role in its development and operation,along with other components and their significance.Therefore,the investigation and technical analysis of the amplifier in the system has been explored in detail.The algorithm developed for the automatic measurements of the system has been effectively deployed in terms of the laser’s performance.With this in perspective,a frequency dependent calibration has been pursued in depth with this scheme which enhances the sensor’s efficiency in terms of its sensitivity.In this way,our investigation helps us in a better understanding and implementation perspective of the proposed system,as the outcomes of our analysis adds to the precision and accuracy of the entire system.
基金This work is supported by the key projects of National Natural Science Foundation of China(Grant Nos.61635005 and U21A20453)the Zhejiang Lab—UESTC Joint Research Center Project(Grant No.202012KFY00562).
文摘Cascaded random Raman fiber lasers(CRRFLs)have been used as a new platform for designing high power and wavelength-agile laser sources.Recently,CRRFL pumped by ytterbium-doped random fiber laser(YRFL)has shown both high power output and low relative intensity noise(RIN).Here,by using a wavelength-and bandwidth-tunable point reflector in YRFL,we experimentally investigate the impacts of YRFL on the spectral and RIN properties of the CRRFL.We verify that the bandwidth of the point reflector in YRFL determines the bandwidth and temporal stability of YRFL.It is found that with an increase in the bandwidth of the point reflector in YRFL from 0.2 nm to 1.4 nm,CRRFL with higher spectral purity and lower RIN can be achieved due to better temporal stability of YRFL pump.By broadening the point reflector’s bandwidth to 1.4 nm,the lasing power,spectral purity,and RIN of the 4th-order random lasing at 1349 nm can reach 3.03 W,96.34%,and–115.19 dB/Hz,respectively.For comparison,the spectral purity and RIN of the 4th-order random lasing with the point reflector’s bandwidth of 0.2 nm are only 91.20%and–107.99 dB/Hz,respectively.Also,we realize a wavelength widely tunable CRRFL pumped by a wavelength-tunable YRFL.This work provides a new platform for the development of ideal distributed Raman amplification pump sources based on CRRFLs with both good temporal stability and wide wavelength tunability,which is of great importance in applications of optical fiber communication and distributed sensing.