Numerical simulation of four-wave mixing efficiency and its induced relative intensity noise

Four-wave mixing, as well as its induced intensity noise, is harmful to wavelength division multiplexing systems. The efficiency and the relative intensity noise of four-wave mixing are numerically simulated for the two-wave and the three-wave fiber transmissions. It is found that the efficiency decreases with the increase of both the frequency spacing and the fiber length, which can be explained using the quasi-phase-matching condition. Furthermore, the relative intensity noise decreases with the increase of frequency spacing, while it increases with the increase of fiber length, which is due to the considerable power loss of the pump light. This investigation presents a good reference for the practical application of wavelength division multiplexing systems.

Relative intensity noise in high-speed hybrid square-rectangular lasers

Relative intensity noise(RIN) and high-speed modulation characteristics are investigated for an Al Ga In As/In P hybrid square-rectangular laser(HSRL) with square side length, rectangular length, and width of 15,300, and 2 μm, respectively. Single-mode operation with side-mode suppression larger than 40 dB has been realized for the HSRL over wide variation of the injection currents. In addition, the HSRL exhibits a 3 dB modulation bandwidth of 15.5 GHz, and an RIN nearly approaches standard quantum shot-noise limit 2 hv∕P=-164 dB∕Hz at high bias currents due to the strong mode selection of the square microcavity. With the increase of the DC bias current of the Fabry–Perot section, significantly enhanced modulation bandwidth and decreased RIN are observed.Furthermore, intrinsic parameters such as resonance frequency, damping factor, and modified Schawlow–Townes linewidth are extracted from the noise spectra.

Investigation on the intensity noise characteristics of the semiconductor ring laser

Based on the frequency-domain multimode theoretical model, detailed investigations on the noise characteristic of the semiconductor ring laser （SRL） are first performed in this paper. The comprehensive nonlinear terms related to the third order nonlinear susceptibility Z3 are included in this model; the Langevin noise sources for electric field and carrier density fluctuations are also taken into account. As the injection current increases, the SRL may present several operation regimes. Remarkable and unusual low frequency noise enhancement in the form of a broad low frequency tail extending all the way to the relaxation oscillation peak is observed in any of the operation regimes of SRLs. The influences of the backscattering coefficient on the relative intensity noise （RIN） spectrum in typical operation regimes are investigated in detail.

Two-Mode Biomedical Sensor Build-up:Characterization of Optical Amplifier

Intracavity absorption spectroscopy is a strikingly sensitive technique that has been integrated with a two-wavelength setup to develop a sensor for human breath.Various factors are considered in such a scenario,out of which Relative Intensity Noise(RIN)has been exploited as an important parameter to characterize and calibrate the said setup.During the performance of an electrical based assessment arrangement which has been developed in the laboratory as an alternative to the expensive Agilent setup,the optical amplifier plays a pivotal role in its development and operation,along with other components and their significance.Therefore,the investigation and technical analysis of the amplifier in the system has been explored in detail.The algorithm developed for the automatic measurements of the system has been effectively deployed in terms of the laser’s performance.With this in perspective,a frequency dependent calibration has been pursued in depth with this scheme which enhances the sensor’s efficiency in terms of its sensitivity.In this way,our investigation helps us in a better understanding and implementation perspective of the proposed system,as the outcomes of our analysis adds to the precision and accuracy of the entire system.

Cascaded Random Raman Fiber Laser With Low RIN and Wide Wavelength Tunability

Cascaded random Raman fiber lasers(CRRFLs)have been used as a new platform for designing high power and wavelength-agile laser sources.Recently,CRRFL pumped by ytterbium-doped random fiber laser(YRFL)has shown both high power output and low relative intensity noise(RIN).Here,by using a wavelength-and bandwidth-tunable point reflector in YRFL,we experimentally investigate the impacts of YRFL on the spectral and RIN properties of the CRRFL.We verify that the bandwidth of the point reflector in YRFL determines the bandwidth and temporal stability of YRFL.It is found that with an increase in the bandwidth of the point reflector in YRFL from 0.2 nm to 1.4 nm,CRRFL with higher spectral purity and lower RIN can be achieved due to better temporal stability of YRFL pump.By broadening the point reflector’s bandwidth to 1.4 nm,the lasing power,spectral purity,and RIN of the 4th-order random lasing at 1349 nm can reach 3.03 W,96.34%,and–115.19 dB/Hz,respectively.For comparison,the spectral purity and RIN of the 4th-order random lasing with the point reflector’s bandwidth of 0.2 nm are only 91.20%and–107.99 dB/Hz,respectively.Also,we realize a wavelength widely tunable CRRFL pumped by a wavelength-tunable YRFL.This work provides a new platform for the development of ideal distributed Raman amplification pump sources based on CRRFLs with both good temporal stability and wide wavelength tunability,which is of great importance in applications of optical fiber communication and distributed sensing.