Changes of China’s Status in the Global System and Its Influencing Factors:A Multiple Contact Networks Perspective

Clarifying China’s position in the global system is an important logical basis for developing national diplomacy.Although much research has been done on China’s development status,most studies have been based on country comparisons or institutional en-vironment.In today’s networked era in which the global economy,trade,personnel,and information are closely connected,studies on China’s global position and its status changes and influencing factors in multiple contact networks are still insufficient.In this study,from the perspective of diverse global contact networks,we constructed economic,cultural,and political influence indices to explore the changes and influencing factors on China’s status in the global system from 2005 to 2018.The results show that during the study period,China’s global influence in the fields of economic ties,cultural exchanges,and political contacts increased significantly,but its influ-ence in the fields of cultural exchanges and political contacts lagged far economic ties.The pattern of China’s economic influence on various economies around the world has shown a transformation from an‘upright pyramid’to an‘inverted pyramid’structure.The proportion of these economies in low-influence zones has decreased from more than 60%in 2005 to less than 20%in 2018.China’s cultural and political influence on various economies around the world has increased significantly;however,for the former,the percentage of high-influence areas is still less than 20%,whereas for the latter the percentage of these economies in medium-and high-influence areas is still less than 50%.Analyses such as a scatter plot matrix show that geographical proximity,economic globalization,close cooperation with developing countries,and a proactive and peaceful foreign policy are important factors in improving China’s status in the diverse global network system.

Optimization design method of contact bounce and breakaway initial velocity for aerospace electromagnetic relay

Aerospace electromagnetic relay is an electric component that has been widely used in aerospace industry.Contact bounce and contact breakaway for initial velocity are the key parameters that have strong influence on reliability and electric life of the relay.Generally,it is difficult to optimize these two parameters simultaneously.In this paper,according to kinetics theory and structural mechanics,a dynamic reaction calculation model of the relay that describes contact bounce and breakaway for initial velocity is proposed.Under the constraints of contact gap and contact force,the optimal combination of debugging parameters is obtained by the application of orthogonal design.It considers the reduction of contact bounce and the augmentation of breakaway for initial velocity as the optimization objectives,and takes the debugging parameters as the optimization variables.All these above ensure the increase of contact breakaway for initial velocity and the decrease of contact bounce simultaneously,and contact arc erosion is also reduced.

深水采油树Spring-Seal密封圈接触模型构建与实验测试

为提高深水采油树在高压、高温、低温等工况下长时间工作的稳定性,对采油树密封圈进行重新设计,提出Spring-Seal密封圈(以下简称S密封圈);基于赫兹接触理论、填料密封接触理论,重新构建S密封圈接触力学模型;建立有限元仿真分析模型,分析不同条件下S密封圈的密封性能,同时验证新建接触模型的合理性;利用实验测试S密封圈的实际密封效果。研究结果表明:S密封圈在高压、高温、低温等工况下能够长时间稳定工作且密封性能良好。研究结果可为S密封圈的接触研究及工程运用提供理论参考。

Influence of the ambient air temperature on the electrical contact reliability of electromagnetic relay

The dynamic contact resistances of HH52P electromagnetic relays are measured under different ambient air tem- perature. Their diagnostic parameters are extracted and determined. It is found that the ambient air temperature obviously influ- ences some parameters. In order to research its influence on the electrical contact reliability of electromagnetic relay, the statistic analysis is applied to study the static contact resistance, the max of the dynamic contact resistance and the bounce time. It is found that the ambient air temperature regularly influences the three parameters. Thoroughly, the phenomenon is studied and analyzed in the point of material science so as to probe into the essential matter of it.

An experimental method for quantitative analysis of real contact area based on the total reflection optical principle

The simulation of real contact area between materials is foundationally important for the contact mechanics of mechanical structures. The Greenwood and Williamson(GW) model and the Majumdar(MB) model are the basic models in this field, which are widely accepted and proven to be valid in many experiments and engineering. Although the contact models have evolved considerably in recent years, the verifications of the models are most based on the indirect methods such as electrical conductivity and contact stiffness, because of the lack of effective methods to directly measure the variation of contact surface. In this paper, the total reflection(TR) method is introduced into the verification of contact models.An experiment system based on TR method is constructed to measure the real contact area of two PMMA specimens. The comparison analysis between the results of experiment and models suggests that the experiment result has the same trend with simulation, the MB model has better agreement with the experimental result because this method can take into account the variation of radius and the merging of asperities, while the GW model has a huge deviation because of the dependence on resolution and the lack of considering the variation of radius and asperity's merging process. Taking the interaction of asperities into account could give a better result that is closer to the experiment. Our results and analysis prove that the experimental methods in this paper could be used as a more direct and valid method to quantitatively measure the real contact area and to verify the contact models.

Failure characteristics of Ag-SnO_2 contact material in AC level

The failure characteristics of the contact material Ag-SnO2 were investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）,and X-ray energy dispersive spectroscopy（EDS）.Phase analysis showed that there were Ag,SnO2,and Sn on the contact surfaces at the time of failure under the load condition of 30 A and 220 V（AC）,which means that SnO2 decomposed in service.When the contacts were tested under airproof ambient condition,half-spherical bulges came into being on the contact surfaces,which resulted in early failure and dispersive characteristics.But half-spherical bulges were not found when the contacts were tested under open ambient condition.The temperature change of the contacts during the life testing under airproof ambient condition was different from that under open ambient condition.

Direct contacts of microglia on myelin sheath and Ranvier’s node in the corpus callosum in rats

Over the recent years, it has been found that microglia pseudopodia contact synapses, detect sick ones and prune them, even in adult animals. Myelinated nerves also carry out plasticity in which microglia remove myelin debris by phagocytosis. However, it remains unknown whether microglia explore structures on nerve fibers, such as Ranvier’s node(RN) or myelin sheath, before they become debris. By double or triple staining RNs or myelin sheathes and microglia in healthy rat corpus callosum, this study unveiled direct contacts of microglia pseudopodia with RNs and with para-and inter-nodal myelin sheathes, which was then verified by electron microscopic observations. Our data indicated that microglia also explore unmyelinated nerve fibers. Furthermore, we used the animals with matured white matter;therefore, microglia may be actively involved in plasticity of matured white matter tracts as it does for synapse pruning, instead of only passively phagocytize myelin debris.

Aggregate gradation design of asphalt mixture with stone-to-stone contact based on fuller's model

Based on Fuller＇s model, a gradation design is presented for the load-carrying capacity of an asphalt mixture with stone-to-stone contact. The coarse aggregate gradation, fine aggregate and filler gradation are respectively designed for their different effects on an asphalt mixture with stone-to-stone contact. The equation of coarse aggregate gradation is deduced from the Fuller＇s model. Fine aggregate gradation is calculated by using Fuller＇s equation. The asphalt mixture with the 16 mm maximum size of aggregate is verified. When the coefficient of coarse aggregate gradation is 0.35 and fine aggregate gradation is 0.25, the volume parameters of asphalt mixture meet the technical specifications. Moreover, the high temperature stability and crack resistance at low temperature are all well.

Design of Non-contact On-load Automatic Regulating Voltage Transformer

At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.

Finite Element Analysis of Elastic-Plastic Contact Mechanic Considering the Effect of Contact Geometry and Material Properties

Each surface of roughness has different shape of asperity which is modeled with various shapes of analytical models. In this paper, the differences among various models of shape of asperity investigate using the Finite Element Method (FEM) and various analytical models. The contact stresses in rough surfaces are calculated analytically using various asperity shape models. Finite element analysis is also carried out assuming three types of material properties namely, the linear, the elastic-perfect plastic and the elastic-nonlinear hardening. The analytical results are compared with the results obtained by the finite element method. The results illustrate for using a deterministic approach which the numerical models are suitable. In hertz model, the result of force is very big in interface of causing deformation plastic, while Model Zhao has almost same result with FEM nonlinear property model. It is observed that the results obtained from Zhao’s model are generally in a better agreement with the results obtained from various finite element models especially in elastic-plastic and plastic zones, hence it may be concluded that Zhao’s model can be used for analyzing the rough surfaces in contact mechanics.

Frictional contact problem for elastic-viscoplastic materials with thermal effect

A dynamic contact problem for elastic-viscoplastic materials with thermal effects is investigated. The contact is bilateral, and the friction is modeled with Tresca＇s friction law with heat exchange. A variational formulation of the model is derived, and the existence of a unique weak solution is proved. The proofs are based on the classical result of nonlinear first order evolution inequalities, the equations with monotone operators, and the fixed point arguments. Finally, the continuous dependence of the solution on the friction yield limit is studied.

新型内啮合S型齿轮啮合效率计算与分析

为了准确计算新型内啮合S型齿轮的啮合效率,引入了考虑轮齿表面滑差、润滑油状况及时变载荷等因素的弹流润滑时变摩擦模型;分析啮合齿面润滑机制,通过轮齿接触分析(Tooth ContactAnalysis,TCA)及轮齿承载接触分析,计算了啮合齿面滑动摩擦因数及摩擦损失功率;在此基础上,获得内啮合S型齿轮啮合周期内的瞬时啮合效率和平均啮合效率,并给出了计算实例。研究结果表明,在相同设计参数下,新型内啮合S型齿轮较渐开线齿轮有更高的啮合效率;经螺旋线修形后,新型内啮合S型齿轮的啮合效率有所提高且随修形量的增大而增大。

Understanding the Properties of Silicon Solar Cells Aluminium Contact Layers and Its Effect on Mechanical Stability

As the thickness of silicon solar wafer and solar cells becomes thinner, the cells are subjected to high stress due to the thermal coefficient mismatch induced by metallization process. Handling and bowing problems associated with thinner wafers become increasingly important, as these can lead to cells cracking and thus to high yield losses. The goal of this work to provide experimental understanding of Al rear side microstructure development and mechanical properties as well as correlate the obtained results with fracture behaviour of the cell. It is shown that the aluminium back contact has a complex microstructure, consisting of five main components: 1) the back surface field layer;2) a eutectic layer;3) spherical (3 - 5 μm) hypereutectic Al-Si particles surrounded by a thin aluminium oxide layer (200 nm);4) a bis- muth-silicate glass matrix;and 5) pores (14 vol%). It was concluded that the eutectic layer thickness and waviness depends on Al particle size, amount of Al paste and textured surface roughness of silicon wafers. The Young’s modulus of the Al-Si particles is estimated by nano-indentation and the overall Young’s modulus is estimated on the basis of bowing measurements and found to be ~43 GPa. It was found, that there is a relation between aluminium paste composition, eutectic layer thickness, mechanical strength and bowing of solar cells. Three main parameters were found to affect the mechanical strength of mc-silicon solar cells with an aluminium contact layer, namely the eutectic layer thickness and uniformity, the Al layer thickness (which results from the Al particle size and its distribution), and the amount of porosity and the bismuth glass fraction.

DO YOU NEED ANY DATA ON CHINA'S POPULATION?PLEASE CONTACT:DUS

Data User Service(DUS)offers you any data on China's population and rclated socioec onomic data--total population,age-sex composition,population density,labour force and more--to help you do demographic research,make investments in China and so on.

Numerical and Experimental Study on Droplet Spreading Motion after Impingement Considering Dynamic Contact Angle with CCUP （CIP-Combined Unified Procedure） Method

The contact angle is one of important parameters to simulate droplet spreading and impingement phenomena on the surface. In the most numerical research, it is assumed constant value and it is implemented as boundary condition. However, contact angle is changed according to contact line velocity and time. Hence, for accurate simulation, dynamic contact angle which has various values as time elapsed is adopted. In the present study, the numerical analysis is performed on the droplet spreading phenomena considering dynamic contact angle function which is obtained from single droplet spreading experiment on the flat and bare surface. The CIP （cubic interpolated pseudo-particle） method by Yabe is used for analysis of interface between liquid and gas phases. The numerical results considering contact angle function which newly modeled as time and contact angle are compared with numerical results considering Hoffman＇s function and experimental data for range of Weber number which are 4.427 and 11.334. In contrast of numerical result considering Hoffman＇s function, the numerical result shows good agreement with experimental data as time elapsed in contact angle evolution, deformation of droplet spreading radius and height. Indeed, overall, the results display the increasing maximum spreading radius and the decreasing height as Weber numbers increased.

鄂北S井区盒8上亚段砂体叠置类型及其对气藏分布的影响

为明确鄂北S井区盒8上亚段地层砂体叠置类型及其与气藏分布的关系,通过岩心观察、测井解释等方法对研究区盒8上亚段沉积微相类型、砂体的垂向叠置及侧向接触关系进行深入研究,再结合试气资料探讨不同砂体叠置类型的气藏分布特征。结果表明:鄂北S井区盒8上亚段为曲流河三角洲平原亚相,有利砂体对应的沉积微相类型为边滩与河道充填微相;砂体垂向叠置类型可划分为分离式、叠加式、切叠式、替代式,侧向接触关系可划分为间湾接触、堤岸接触、对接式、侧切式、替代式;鄂北S井区盒8上亚段砂体垂向叠置类型主要为侧向切叠式和替代式,增加了砂体在侧向上的连通性;盒8上亚段砂体侧向接触关系主要为侧切式,提升了砂体侧向上的连通程度,气藏储存关系较好;单一、孤立存在的砂体,其连通性较差,整体的含气性也较差。该研究对寻找低渗透背景下产能高、潜力大的砂体分布区具有重要指导意义。

基于S变换的新型波阻抗方向继电器

为提高行波保护的灵敏性与可靠性,提出一种基于S变换的新型波阻抗方向继电器。通过对正方向线路故障后初始行波特征的分析,定义方向继电器的背侧母线波阻抗。依据该阻抗及继电器正方线路波阻抗分别设置正、反方向阻抗圆,构成双阻抗圆的方向判据。利用S变换提取单频率的电压、电流初始行波,并计算出波阻抗,根据该阻抗在正、反方向阻抗圆内的位置判别故障方向。PSCAD/EMTDC仿真结果表明:该继电器能可靠、灵敏、超高速识别正反方向故障,其性能受故障初始角、故障距离、故障电阻等因素的影响小,能适应母线结构的变化。以该继电器构成的超高速方向纵联保护具有良好的工程应用前景。

ANSYS在求解轴承接触问题中的应用

以点接触为例 ,对ANSYS有限元分析计算结果与赫兹解进行比较 ,指出在利用ANSYS求解接触问题时 ,接触体的接触区及附近区域的单元网格边长应不大于接触椭圆的半轴长度 ,且小于接触椭圆短半轴长度的5 0 %时为佳 ,以满足有限元分析结果精度的需要。

继电保护装置与通信设备2 Mbit/s光接口互联技术

目前在电网运行中复用继电保护装置与通信光传输设备间以2 Mbit/s电口互连,存在着连接复杂、光电转换设备缺少统一的接口标准、光电转换设备不能网管监控等问题。因此,提出了适用于保护装置和通信设备的2 Mbit/s光接口方式及其技术标准,并完成了相关测试工作。结果显示,复用继电保护装置与通信光传输设备之间采用统一标准的2 Mbit/s光接口直连通信是可行的,但其可靠性和稳定性尚待进一步验证。

基于S变换的行波相位比较式方向继电器

为了提高行波保护在小初始角故障时的灵敏性与可靠性,降低行波保护的采样频率,提出基于S变换的初始行波相位比较式方向继电器。通过分析故障初始电压、电流行波之间的关系特征,定义了初始行波相位差,该相位差的大小仅由故障网络决定,与故障距离、过渡电阻、故障类型等因素无关。利用S变换提取单频率的电压、电流初始行波在时域中的幅值、相位,并计算初始行波相位差,通过比较该相位差与整定值的大小判断故障方向。PSCAD/EMTDC仿真研究中采样频率为25 kHz。大量仿真结果表明:该算法能可靠、灵敏、超高速识别正反方向故障,其性能受故障初始角、故障类型、故障距离、故障电阻的影响小。