The Reliability Design of a Kind of Multioption Fuze

On the basis of analysing the reliability problems existing in the general design of a kind of multioption fuze. some problems such as the reliability model. the reliability distribution of the electronic part of the fuze are discussed. For a particular multioption fuze, then.according to three different setting ways. the calculating methods of its operating reliability in six different operating states are given.

Reliability analysis of marine risers with narrow and long corrosion defects under combined loads

A marine riser,one of the most important components of offshore oil/gas transportation,needs to be designed to eliminate the risks caused by complex ocean environments,platform displacement and internal corrosion,etc.In this study,a new analytical-numerical assessment approach is proposed in order to quantitatively investigate the reliability of internally corroded risers under combined loads including axial tension and internal pressure.First,an analytical solution of the limit state function of intact risers under combined loads is obtained,which is further modified by the non-dimensional corrosion depth （d/ t） for the risers with a narrow and long corrosion defect.The relationship between d/t and limited internal pressure is obtained by finite element analysis and nonlinear regression.Through an advanced first-order reliability method （HL-RF） algorithm,reliability analysis is performed to obtain the failure probability,the reliability index and the sensitivity.These results are further verified by Monte-Carlo importance sampling.The proposed approach of reliability analysis provides an accurate and effective way to estimate the reliability of marine risers with narrow and long corrosion defects under combined loads.

An Approach to Online Reliability Evaluation and Prediction of Mechanical Transmission Components

New development trends in electronic operating data logging systems enable classification, recording and storage of load spectrums of mechanical transmission components during usage. Based on this fact, the application of online reliability evaluation and reliability prediction procedures are presented. Different methods are considered to calculate reliability, depending on actual load spectrum and a Wohler curve. The prediction of a reliability trend is analyzed by the application of time series models. For this purpose, exponential smoothing model, regression model, and the ARIMA model are considered to evaluate data and predict an decreasing reliability trends during usage.

COUPLING EFFECT BETWEEN RELIABILITY OF BEDDING LAYER AND STABILITY OF DOWNSTREAM CONCRETE SLAB OF OVERFLOW EARTH-ROCK COFFERDAM

The protection of downstream concrete slab is a key issue for the stability of overflow earth-rock cofferdam. The coupling effect between bedding layer and concrete slab was taken into account when the stability of downstream concrete slab was researched. The characteristics of overflow and seepage over the downstream concrete slab were investigated when floodwater passes over the cofferdam. Firstly a limit equation of seepage failure for the bedding layer was derived with the consideration of geometric and mechanical factors, and a reliability model was established and numerically simulated. Then based on the reliability calculation for the bedding layer, the coupling effect between bedding layer and downstream concrete slab was analyzed. Under the most unfavorable pressure condition for the concrete slab, its instability criterion was put forward, which offers a structural design tool of downstream concrete slab for overflow earth-rock cofferdam. Compared with model tests, it shows that the model of reliability calculation of bedding layer and the stability analysis of downstream concrete slab are effective.