Impact coefficient and reliability of mid-span continuous beam bridge under action of extra heavy vehicle with low speed

To analyze the dynamic response and reliability of a continuous beam bridge under the action of an extra heavy vehicle, a vehicle–bridge coupled vibration model was established based on the virtual work principle and vehicle–bridge displacement compatibility equation, which can accurately simulate the dynamic characteristics of the vehicle and bridge. Results show that deck roughness has an important function in the effect of the vehicle on the bridge. When an extra heavy vehicle passes through the continuous beam bridge at a low speed of 5 km/h, the impact coefficient reaches a high value, which should not be disregarded in bridge safety assessments. Considering that no specific law exists between the impact coefficient and vehicle speed, vehicle speed should not be unduly limited and deck roughness repairing should be paid considerable attention. Deck roughness has a significant influence on the reliability index, which decreases as deck roughness increases. For the continuous beam bridge in this work, the reliability index of each control section is greater than the minimum reliability index. No reinforcement measures are required for over-sized transport.

Research on Partial Coefficients for Design of Quarter-circular Caisson Breakwater

The quarter-circular caisson breakwater （QCB） is a new type of breakwater, and it can be applied in deepwater. The stability of QCB under wave force action can be enhanced, and the rubble mound engineering can be less than that of semi-circular breakwaters in deepwater. In order to study the wave force distribution acting on the QCB, to find wave force formula for this type of breakwater, firstly in this paper, the distribution characteristics of the horizontal force, the downward vertical force and the uplift force on the breakwater were gotten based on physical model wave flume experiments and on the analysis of the wave pressure experimental data. Based on a series of physical model tests acted by irregular waves, a kind of calculation method, which was modified by Goda formula, was proposed to carry out the wave force on the QCB. Secondly, the reliability method with correlated variables was adopted to analyze the QCB, considering the high correlation between wave forces or moments. Utilizing the observed wave data in engineering field, the reliability index and failure probability of QCB were obtained. Finally, a factor Q=0.9 is given to modify the zero pressure height above SWL of QCB, and wave force partial coefficient 1.34 to the design expressions of QCB for anti-sliding, as well as 1.67 for anti-overturning, were presented.

Reliability Sensitivity-based Correlation Coefficient Calculation in Structural Reliability Analysis

The correlation coefficients of random variables of mechanical structures are generally chosen with experience or even ignored,which cannot actually reflect the effects of parameter uncertainties on reliability.To discuss the selection problem of the correlation coefficients from the reliability-based sensitivity point of view,the theory principle of the problem is established based on the results of the reliability sensitivity,and the criterion of correlation among random variables is shown.The values of the correlation coefficients are obtained according to the proposed principle and the reliability sensitivity problem is discussed.Numerical studies have shown the following results：（1） If the sensitivity value of correlation coefficient ρ is less than（at what magnitude 0.000 01）,then the correlation could be ignored,which could simplify the procedure without introducing additional error.（2） However,as the difference between ρs,that is the most sensitive to the reliability,and ρR,that is with the smallest reliability,is less than 0.001,ρs is suggested to model the dependency of random variables.This could ensure the robust quality of system without the loss of safety requirement.（3） In the case of ｜Eabs｜ρ0.001 and also ｜Erel｜ρ0.001,ρR should be employed to quantify the correlation among random variables in order to ensure the accuracy of reliability analysis.Application of the proposed approach could provide a practical routine for mechanical design and manufactory to study the reliability and reliability-based sensitivity of basic design variables in mechanical reliability analysis and design.