A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treat...A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treatment of graphene oxide and MnO_(2)@polypyrrole coaxial nanotubes.The stable composite hydrogel with a hierarchical network was composed of one-dimensional MnO_(2)@polypyrrole coaxial nanotube and two-dimensional graphene nanosheet and characterized by scanning electron microscope,Fourier transform infrared spectroscopy,X-ray diffraction,Brunauer-Emmett-Teller surface,and X-ray photoelectron spectroscopy measurements.The composite hydrogel can be used as an efficient adsorbent for Cr(Ⅵ)removal due to the synergistic interaction between graphene and MnO_(2)@polypyrrole and the hierarchical structure of the hydrogel.Moreover,the composite hydrogel is easily separated because of its stable monolith,and it is reusable(76.8%of removal ability remaining after five adsorption-desorption cycles).The simple fabrication and cost-effective separation process together with the excellent absorption performance endow the composite hydrogel with great potential for practical wastewater treatment.展开更多
For a highly efficient recycling of a wastewater containing a high concentration of MgCl_(2),Al(Ⅲ)and P507 were scheduled to be removed in advance.In this study,the in-situ removal of Al(Ⅲ)and P507 from a high conce...For a highly efficient recycling of a wastewater containing a high concentration of MgCl_(2),Al(Ⅲ)and P507 were scheduled to be removed in advance.In this study,the in-situ removal of Al(Ⅲ)and P507 from a high concentration MgCl_(2)solution at different pH values and Al/P molar ratios was investigated.The results showed that P507 formed organic complexes of Al_(x)(OH)_y^(Z+)-P507 at pH of 2.0-4.0.At pH of 4.0-5.0,Al(Ⅲ)precipitated and transferred into Al(OH)_(3)with a flocculent amorphous morphology.Active sites on the Al(OH)_(3)surface enhanced the removal efficiency of P507.At pH of 6.0-6.5,Al(Ⅲ)and Mg(Ⅱ)formed layered crystalline Al(OH)_(3)and MgAl_(2)(OH)_(8with)small pore channels and fewer active sites,resulting in a reduced removal efficiency of P507.When the Al/P molar ratio exceeded 13 and the pH was between 4.0 and 5.0,the removal rates of both Al(Ⅲ)and P507 were higher than98%,while the concentration loss of Mg(Ⅱ)was only 0.2%-0.9%.展开更多
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co...This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.展开更多
Removal of SO2 and NOx by pulsed corona combined with in situ alkali absorption was experimentally investigated.In the reactor,a plate-wire-plate combination is devised for generating pulsed corona and then alkaline a...Removal of SO2 and NOx by pulsed corona combined with in situ alkali absorption was experimentally investigated.In the reactor,a plate-wire-plate combination is devised for generating pulsed corona and then alkaline absorbent slurries were introduced into the reactor by a continuous band conveying system to capture the gaseous reaction products.It was found that both SO2 and NO could be removed by corona combined with in situ alkali absorption.The removal of SO2 increased to 75%with the corona discharge,compared with 60%removal only with Ca(OH)2 absorption.About 40%removal of NO was reached by pulsed corona combined with in situ Ca(OH)2 absorption.It was found that SO2 and NO in the gas stream are oxidized to SO3 and NO2 by pulsed corona respectively,and then absorbed by the alkali in the reactor.The removals of SO2 as well as NO were higher with Ca(OH)2 as the absorbent,compared with using CaCO3 or ZnO.展开更多
In order to investigate the feasibility of sequential removal NO and SO2 using non-thermal plasma and adsorbent simultaneously, the removal of NO and SO2 from dry gas stream （NO/SO2/N2/O2） with very little O2 using ...In order to investigate the feasibility of sequential removal NO and SO2 using non-thermal plasma and adsorbent simultaneously, the removal of NO and SO2 from dry gas stream （NO/SO2/N2/O2） with very little O2 using non-thermal plasma was investigated using a coaxial dielectric barrier discharge. Comparative experiments were carried out in the dry gas stream with and without Ar respectively at O2 concentration of 0.1%. The results showed that NO could be removed remarkably and it would be enhanced in the presence of Ar in the dry gas stream. It seems that SO2 could not be removed unless there is Ar in the dry gas stream. The mechanism of removal of NO and SO2 in the dry gas stream was discussed.展开更多
To study the mechanism of SO2 and Hg removal from flue gas, an experimental packed bed reactor was designed to simulate the dry FGD, where a mixture of lime and fly ash in ratio 1：3 w/w was used as the S02 and Hg sor...To study the mechanism of SO2 and Hg removal from flue gas, an experimental packed bed reactor was designed to simulate the dry FGD, where a mixture of lime and fly ash in ratio 1：3 w/w was used as the S02 and Hg sorbent, and steam at temperature of 100 ℃ was applied for activation of the sorbent, while the activation time set to 20 rain. The experimental factors including the SO2/Hg sorbent characteristics, 50% breakthrough time for SO2/Hg removal, sorbent packed bed depth and reaction temperature were investigated. The experimental results show that after steam activation, the BET specific surface area and specific pore volume increased from 37.8 to 45.5 m^2/g and from 0.42 to 0.51 cm^3/g, respectively. With activation of the sorbent by steam, the 50% breakthrough times of SO2 and Hg removal increased from 34 to 42 rain and from 23 to 45 rain, respectively. When the packed bed depth was increased from 5 to 25 ram. the 50% breakthrough times for Hg and S02 removal increased from 12 to 52 rain and from 6 to 47 rain, respectively. With the increase of the reaction temperature, the 50% breakthrough of SO2/Hg removal decreased accordingly. Steam activation can efficiently improve SO2/Hg removal simultaneously.展开更多
The dielectric barrier corona discharge(DBCD) in a wire-cylinder configuration and the dielectric barrier discharge(DBD) in a coaxial cylinder configuration are studied. The discharge current in DBD has a higher pulse...The dielectric barrier corona discharge(DBCD) in a wire-cylinder configuration and the dielectric barrier discharge(DBD) in a coaxial cylinder configuration are studied. The discharge current in DBD has a higher pulse amplitude than in DBCD. The dissipated power and the gas-gap voltage are calculated by analyzing the measured Lissajous figure. With the increasing applied voltage, the energy utilization factor for SO2 removal increases in DBCD but decreases in DBD because of the difference in their electric field distribution. Experiments of SO2 removal show that in the absence of NH3 the energy utilization factor can reach 31 g/kWh in DBCD and 39 g/kWh in DBD.展开更多
In this study, titanium dioxide supported by multi-walled carbon nano tubes(MWCNTs/TiO_2) and Cr-doped TiO_2 supported by MWCNTs(MWNTs/Cr-TiO_2) were synthesized by the sol-gel method. The prepared samples were charac...In this study, titanium dioxide supported by multi-walled carbon nano tubes(MWCNTs/TiO_2) and Cr-doped TiO_2 supported by MWCNTs(MWNTs/Cr-TiO_2) were synthesized by the sol-gel method. The prepared samples were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, the BrunauerEmmett-Teller analysis, and the Raman spectroscopy. The oxidation and efficiency for removal of SO_2 in a simulated flue gas were investigated experimentally in a fixed-bed reactor. The 15% MWCNTs/Cr-Ti02 sample displayed excellent adsorption properties, and a SO_2 removal rate equating to 30.415 1 mg/g from the simulated flue gas containing 2 300 μg/g of SO_2, 8% of 02, and 5% of H20 was achieved under optimal conditions covering a temperature of 333.15 K, and a space velocity of 1 275 h^(-1). The adsorption process was enhanced because Cr doping modified the pore structure and inhibited the grain growth of TiO_2. In addition, the Freundlich and Langmuir models revealed that SO_2 was mainly adsorbed through chemical adsorption on the sample surfaces, and the thermodynamic model analysis indicated that the adsorption was a spontaneous, exothermic, and entropy-reducing process. The adsorption kinetics of SO_2 can be described by the pseudosecond-order kinetic and the Bangham dynamics models. The possible reaction mechanism involved in desulfurization process was also proposed.展开更多
In this paper, an experimental study on SO2 removal by nanosecond rising edge pulse dielectric barrier discharge （DBD） plasma, generated by multi-needle-to-plane electrodes, is carried out. The mechanism of the effe...In this paper, an experimental study on SO2 removal by nanosecond rising edge pulse dielectric barrier discharge （DBD） plasma, generated by multi-needle-to-plane electrodes, is carried out. The mechanism of the effect of various factors, such as gap size between dielectric barrier and discharge needles, environmental humidity, and inlet speed of gas flow upon the removal efficiency of air purification is analyzed. The studies show that SOs removal efficiency improves with the increase in the gap size between dielectric barrier and discharge needles in the case of a fixed space between two electrodes, and also improves with the increase in the environmental humidity. For a mixed gas with a fixed concentration, there is an optimal inlet speed of gas flow, which leads to the best removal efficiency.展开更多
Dielectric barrier discharge （DBD） for SOs removal from indoor air is investigated. In order to improve the removal efficiency, two novel methods are combined in this paper, namely by applying a pulsed driving volta...Dielectric barrier discharge （DBD） for SOs removal from indoor air is investigated. In order to improve the removal efficiency, two novel methods are combined in this paper, namely by applying a pulsed driving voltage with nanosecond rising time and applying a magnetic field. For SOs removal efficiency, different matches of electric field and magnetic field are discussed. And nanosecond rising edge pulsed power supply and microsecond rising edge pulsed power supply are compared. It can be concluded that a pulsed DBD with nanosecond rising edge should be adopted, and electrical field and magnetic field should be applied in an appropriate match.展开更多
In this study, lime-hydrate （Ca（OH）2） desulfurizer was treated by plasma with strong ionization discharge of a dielectric barrier. The removal of SO2 from simulated flue gas was investigated. The principles of SO2...In this study, lime-hydrate （Ca（OH）2） desulfurizer was treated by plasma with strong ionization discharge of a dielectric barrier. The removal of SO2 from simulated flue gas was investigated. The principles of SO2 removal are discussed. Several factors affecting the efficiency of SO2 removal were studied. They included the ratio of calcium to sulfur （Ca/S）, desulfurizer granularity, residence time of the flue gas, voltage applied to the discharge electrode in the plasma generator, and energy consumption. Experimental results indicate that the increase in Ca/S ratio, the applied voltage and discharge power, the residence time, and the reduction in the desulfurizer granularity all can raise the SO2 removal efficiency. The SO2 removal efficiency was up to 91.3% under the following conditions, namely a primary concentration of SO2 of 2262×10^-6 （v/v） in the emission gas, 21%（v/v） of oxygen, 1.8% （v/v） of water, a Ca/S ratio of 1.48, a residence time of 2.8 s, a 3.4 kV voltage and a 10kHz frequency power applied to the discharge electrodes in the plasma generator, and a flow rate of 100 m^3/h for emission gas.展开更多
Hollow Bi2WO6 microspheres are successfully synthesized by a facile ultrasonic spray pyrolysis（USP） method using NaCl as a salt template.The as-prepared hollow microspheres assembled as nanoplates with dimensions of...Hollow Bi2WO6 microspheres are successfully synthesized by a facile ultrasonic spray pyrolysis（USP） method using NaCl as a salt template.The as-prepared hollow microspheres assembled as nanoplates with dimensions of approximately 41-148 nm and are dispersed with non-uniform pores on the template surface.By swapping the salt template with KC1 or Na2SO4,different morphologies of Bi2WO6 are obtained.The experimental results demonstrate that NaCl plays a key role on the formation of Bi2WO6 with hollow structures.The specific growth mechanism of hollow microspheres was studied in detail.The Bi2WO6 hollow microspheres exhibit an excellent photocatalytic efficiency for NO removal under solar light irradiation,which is 1.73 times higher than for the Bi2WO6 obtained in the absence of any salt template.This enhancement can be ascribed to the simultaneous improvement on the surface area and visible light-harvesting ability from the hollow structures.Electron spin resonance（ESR） results suggest that both radicals of ·OH and ·O2^- are involved in the photocatalytic process over the BWO-NaCl sample.The production of ·O2^- radicals offers better durability for NO removal.展开更多
基金Funded by the Open/Innovation Fund of Hubei Three Gorges Laboratory(No.SK212002)。
文摘A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treatment of graphene oxide and MnO_(2)@polypyrrole coaxial nanotubes.The stable composite hydrogel with a hierarchical network was composed of one-dimensional MnO_(2)@polypyrrole coaxial nanotube and two-dimensional graphene nanosheet and characterized by scanning electron microscope,Fourier transform infrared spectroscopy,X-ray diffraction,Brunauer-Emmett-Teller surface,and X-ray photoelectron spectroscopy measurements.The composite hydrogel can be used as an efficient adsorbent for Cr(Ⅵ)removal due to the synergistic interaction between graphene and MnO_(2)@polypyrrole and the hierarchical structure of the hydrogel.Moreover,the composite hydrogel is easily separated because of its stable monolith,and it is reusable(76.8%of removal ability remaining after five adsorption-desorption cycles).The simple fabrication and cost-effective separation process together with the excellent absorption performance endow the composite hydrogel with great potential for practical wastewater treatment.
基金financial supports from the National Key Research and Development Program of China(No.2022YFB3504501)the National Natural Science Foundation of China(Nos.52274355,91962211)the Gansu Province Science and Technology Major Special Project,China(No.22ZD6GD061)。
文摘For a highly efficient recycling of a wastewater containing a high concentration of MgCl_(2),Al(Ⅲ)and P507 were scheduled to be removed in advance.In this study,the in-situ removal of Al(Ⅲ)and P507 from a high concentration MgCl_(2)solution at different pH values and Al/P molar ratios was investigated.The results showed that P507 formed organic complexes of Al_(x)(OH)_y^(Z+)-P507 at pH of 2.0-4.0.At pH of 4.0-5.0,Al(Ⅲ)precipitated and transferred into Al(OH)_(3)with a flocculent amorphous morphology.Active sites on the Al(OH)_(3)surface enhanced the removal efficiency of P507.At pH of 6.0-6.5,Al(Ⅲ)and Mg(Ⅱ)formed layered crystalline Al(OH)_(3)and MgAl_(2)(OH)_(8with)small pore channels and fewer active sites,resulting in a reduced removal efficiency of P507.When the Al/P molar ratio exceeded 13 and the pH was between 4.0 and 5.0,the removal rates of both Al(Ⅲ)and P507 were higher than98%,while the concentration loss of Mg(Ⅱ)was only 0.2%-0.9%.
文摘This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.
基金Supported by the Science and Technology Development Project of Zhejiang Province(2007C13085)Hangzhou City(20070733B28)
文摘Removal of SO2 and NOx by pulsed corona combined with in situ alkali absorption was experimentally investigated.In the reactor,a plate-wire-plate combination is devised for generating pulsed corona and then alkaline absorbent slurries were introduced into the reactor by a continuous band conveying system to capture the gaseous reaction products.It was found that both SO2 and NO could be removed by corona combined with in situ alkali absorption.The removal of SO2 increased to 75%with the corona discharge,compared with 60%removal only with Ca(OH)2 absorption.About 40%removal of NO was reached by pulsed corona combined with in situ Ca(OH)2 absorption.It was found that SO2 and NO in the gas stream are oxidized to SO3 and NO2 by pulsed corona respectively,and then absorbed by the alkali in the reactor.The removals of SO2 as well as NO were higher with Ca(OH)2 as the absorbent,compared with using CaCO3 or ZnO.
基金Project supported by the National Natural Sciences Foundation of China(No.50576037)Natural Science Foundation of Jiangsu Province(No.BK2006198)
文摘In order to investigate the feasibility of sequential removal NO and SO2 using non-thermal plasma and adsorbent simultaneously, the removal of NO and SO2 from dry gas stream （NO/SO2/N2/O2） with very little O2 using non-thermal plasma was investigated using a coaxial dielectric barrier discharge. Comparative experiments were carried out in the dry gas stream with and without Ar respectively at O2 concentration of 0.1%. The results showed that NO could be removed remarkably and it would be enhanced in the presence of Ar in the dry gas stream. It seems that SO2 could not be removed unless there is Ar in the dry gas stream. The mechanism of removal of NO and SO2 in the dry gas stream was discussed.
基金supported by the National High-Tech R&D Program of China (No. 2008AA06Z318)the Ministry of Environmental Protection of China (Nos. 201009048 and 200909025)
文摘To study the mechanism of SO2 and Hg removal from flue gas, an experimental packed bed reactor was designed to simulate the dry FGD, where a mixture of lime and fly ash in ratio 1：3 w/w was used as the S02 and Hg sorbent, and steam at temperature of 100 ℃ was applied for activation of the sorbent, while the activation time set to 20 rain. The experimental factors including the SO2/Hg sorbent characteristics, 50% breakthrough time for SO2/Hg removal, sorbent packed bed depth and reaction temperature were investigated. The experimental results show that after steam activation, the BET specific surface area and specific pore volume increased from 37.8 to 45.5 m^2/g and from 0.42 to 0.51 cm^3/g, respectively. With activation of the sorbent by steam, the 50% breakthrough times of SO2 and Hg removal increased from 34 to 42 rain and from 23 to 45 rain, respectively. When the packed bed depth was increased from 5 to 25 ram. the 50% breakthrough times for Hg and S02 removal increased from 12 to 52 rain and from 6 to 47 rain, respectively. With the increase of the reaction temperature, the 50% breakthrough of SO2/Hg removal decreased accordingly. Steam activation can efficiently improve SO2/Hg removal simultaneously.
文摘The dielectric barrier corona discharge(DBCD) in a wire-cylinder configuration and the dielectric barrier discharge(DBD) in a coaxial cylinder configuration are studied. The discharge current in DBD has a higher pulse amplitude than in DBCD. The dissipated power and the gas-gap voltage are calculated by analyzing the measured Lissajous figure. With the increasing applied voltage, the energy utilization factor for SO2 removal increases in DBCD but decreases in DBD because of the difference in their electric field distribution. Experiments of SO2 removal show that in the absence of NH3 the energy utilization factor can reach 31 g/kWh in DBCD and 39 g/kWh in DBD.
基金financially supported by the National Natural Science Foundation of China (No. 51706091)the Open Foundation of Key Laboratory of Industrial Ecology and Environmental Engineering, MOE of China (No. KLIEEE-18-04)+1 种基金the Talent Scientific Research Fund of LSHU(No. 2018XJJ-011)the PhD Research Startup Foundation of Liaoning Shihua University (No. 2016XJJ-025)
文摘In this study, titanium dioxide supported by multi-walled carbon nano tubes(MWCNTs/TiO_2) and Cr-doped TiO_2 supported by MWCNTs(MWNTs/Cr-TiO_2) were synthesized by the sol-gel method. The prepared samples were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, the BrunauerEmmett-Teller analysis, and the Raman spectroscopy. The oxidation and efficiency for removal of SO_2 in a simulated flue gas were investigated experimentally in a fixed-bed reactor. The 15% MWCNTs/Cr-Ti02 sample displayed excellent adsorption properties, and a SO_2 removal rate equating to 30.415 1 mg/g from the simulated flue gas containing 2 300 μg/g of SO_2, 8% of 02, and 5% of H20 was achieved under optimal conditions covering a temperature of 333.15 K, and a space velocity of 1 275 h^(-1). The adsorption process was enhanced because Cr doping modified the pore structure and inhibited the grain growth of TiO_2. In addition, the Freundlich and Langmuir models revealed that SO_2 was mainly adsorbed through chemical adsorption on the sample surfaces, and the thermodynamic model analysis indicated that the adsorption was a spontaneous, exothermic, and entropy-reducing process. The adsorption kinetics of SO_2 can be described by the pseudosecond-order kinetic and the Bangham dynamics models. The possible reaction mechanism involved in desulfurization process was also proposed.
基金the National Science Foundation for Distinguished Young Scholars of China (No.50525722)the Science and Technology research key project of MOE
文摘In this paper, an experimental study on SO2 removal by nanosecond rising edge pulse dielectric barrier discharge （DBD） plasma, generated by multi-needle-to-plane electrodes, is carried out. The mechanism of the effect of various factors, such as gap size between dielectric barrier and discharge needles, environmental humidity, and inlet speed of gas flow upon the removal efficiency of air purification is analyzed. The studies show that SOs removal efficiency improves with the increase in the gap size between dielectric barrier and discharge needles in the case of a fixed space between two electrodes, and also improves with the increase in the environmental humidity. For a mixed gas with a fixed concentration, there is an optimal inlet speed of gas flow, which leads to the best removal efficiency.
基金the Sci.& Tech.research key project of Ministry of Education and National Natural Science Foundation of China (Nos.50477025 and 50537050)
文摘Dielectric barrier discharge （DBD） for SOs removal from indoor air is investigated. In order to improve the removal efficiency, two novel methods are combined in this paper, namely by applying a pulsed driving voltage with nanosecond rising time and applying a magnetic field. For SOs removal efficiency, different matches of electric field and magnetic field are discussed. And nanosecond rising edge pulsed power supply and microsecond rising edge pulsed power supply are compared. It can be concluded that a pulsed DBD with nanosecond rising edge should be adopted, and electrical field and magnetic field should be applied in an appropriate match.
基金National Natural Science Foundation of China(No.50578020)the Project of Jiangsu University High-level Professional Scientific Research Fund(No.05JDG052)Jiangsu Educational Science Key Topics for the"11th Five-Year"Plan(B-b/2006/01/019)
文摘In this study, lime-hydrate （Ca（OH）2） desulfurizer was treated by plasma with strong ionization discharge of a dielectric barrier. The removal of SO2 from simulated flue gas was investigated. The principles of SO2 removal are discussed. Several factors affecting the efficiency of SO2 removal were studied. They included the ratio of calcium to sulfur （Ca/S）, desulfurizer granularity, residence time of the flue gas, voltage applied to the discharge electrode in the plasma generator, and energy consumption. Experimental results indicate that the increase in Ca/S ratio, the applied voltage and discharge power, the residence time, and the reduction in the desulfurizer granularity all can raise the SO2 removal efficiency. The SO2 removal efficiency was up to 91.3% under the following conditions, namely a primary concentration of SO2 of 2262×10^-6 （v/v） in the emission gas, 21%（v/v） of oxygen, 1.8% （v/v） of water, a Ca/S ratio of 1.48, a residence time of 2.8 s, a 3.4 kV voltage and a 10kHz frequency power applied to the discharge electrodes in the plasma generator, and a flow rate of 100 m^3/h for emission gas.
基金supported by the National Natural Science Foundation of China (41503102, 41401567, 41573138)the China Postdoctoral Science Foundation (2015M572568)~~
文摘Hollow Bi2WO6 microspheres are successfully synthesized by a facile ultrasonic spray pyrolysis（USP） method using NaCl as a salt template.The as-prepared hollow microspheres assembled as nanoplates with dimensions of approximately 41-148 nm and are dispersed with non-uniform pores on the template surface.By swapping the salt template with KC1 or Na2SO4,different morphologies of Bi2WO6 are obtained.The experimental results demonstrate that NaCl plays a key role on the formation of Bi2WO6 with hollow structures.The specific growth mechanism of hollow microspheres was studied in detail.The Bi2WO6 hollow microspheres exhibit an excellent photocatalytic efficiency for NO removal under solar light irradiation,which is 1.73 times higher than for the Bi2WO6 obtained in the absence of any salt template.This enhancement can be ascribed to the simultaneous improvement on the surface area and visible light-harvesting ability from the hollow structures.Electron spin resonance（ESR） results suggest that both radicals of ·OH and ·O2^- are involved in the photocatalytic process over the BWO-NaCl sample.The production of ·O2^- radicals offers better durability for NO removal.
