Reservoir Characterization of the Early Cretaceous Sarmord and Garagu Formations from Atrush-1 and Mangesh-1 Wells, Kurdistan Region, Iraq

Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomitic limestones interbedded with thin to medium layers of yellowish-gray marl (calcareous mudstone). The current study shows that the average shale volume in the Sarmord and Garage formations is between 16% and 20%. In Atrush-1 Well, the average porosity ratio of the Sarmord and Garagu formations is fair to good (15% and 11%, respectively). However, in Mangesh-1 Well, the porosity value is poor;it is around 4% on average. Generally, most of the hydrocarbons that have been observed within the pore spaces are residual oil type in Atrush-1 Well and movable hydrocarbon type in Mangesh-1 Well. In Atrush-1 Well, out of 362 m thickness of both formations, only 180 m is considered to be a pay zone;whereas, the pay zone is just around 8.0 m thick out of 347 m of the total thickness. According to the calculated porosity values, the Garagu and Sarmord formations are not considered as good reservoirs in the studied wells, with the exception of Atrush-1 Well where the Sarmord Formation has fair potential reservoir characteristics.

Quantitative characterization of tight gas sandstone reservoirs using seismic data via an integrated rock-physics-based framework

Seismic characterizing of tight gas sandstone (TGS) reservoirs is essential for identifying promising gas-bearing regions. However, exploring the petrophysical significance of seismic-inverted elastic properties is challenging due to the complex microstructures in TGSs. Meanwhile, interbedded structures of sandstone and mudstone intensify the difficulty in accurately extracting the crucial tight sandstone properties. An integrated rock-physics-based framework is proposed to estimate the reservoir quality of TGSs from seismic data. TGSs with complex pore structures are modeled using the double-porosity model, providing a practical tool to compute rock physics templates for reservoir parameter estimation. The VP/VS ratio is utilized to predict the cumulative thickness of the TGS reservoirs within the target range via the threshold value evaluated from wireline logs for lithology discrimination. This approach also facilitates better capturing the elastic properties of the TGSs for quantitative seismic interpretation. Total porosity is estimated from P-wave impedance using the correlation obtained based on wireline log analysis. After that, the three-dimensional rock-physics templates integrated with the estimated total porosity are constructed to interpret microfracture porosity and gas saturation from velocity ratio and bulk modulus. The integrated framework can optimally estimate the parameters dominating the reservoir quality. The results of the indicator proposed based on the obtained parameters are in good agreement with the gas productions and can be utilized to predict promising TGS reservoirs. Moreover, the results suggest that considering microfracture porosity allows a more accurate prediction of high-quality reservoirs, further validating the applicability of the proposed method in the studied region.

Application of seismic sedimentology in characterization of fluvial-deltaic reservoirs in Xihu sag, East China Sea shelf basin

The fluvial-deltaic reservoirs of the Oligocene Huagang Formation in the Xihu sag of the East China Sea shelf basin reflect rapid lateral change in sedimentary facies and poor morphology of conventional slice attributes,which bring difficulties to the reservoir prediction for subsequent exploration and development of lithologic reservoirs.The traditional seismic sedimentology technology is optimized by applying the characteristic technologies such as frequency-boosting interpretation,inversion-conventional–90°phase shift joint construction of seismic lithologic bodies,nonlinear slices,paleogeomorphology restoration,and multi-attribute fusion,to obtain typical slice attributes,which are conducive to geological form description and sedimentary interpretation.The Huagang Formation developed three types of sedimentary bodies:braided river,meandering river and shallow water delta,and the vertical sedimentary evolution was controlled by the mid-term base-level cycle and paleogeomorphology.In the early–middle stage of the mid-term base-level ascending cycle,braided channel deposits were dominant,and vertical superimposed sand bodies were developed.In the late stage of the ascending half-cycle and the early stage of the descending half-cycle,meandering river deposits were dominant,and isolated sand bodies were developed.In the middle–late stage of the descending half-cycle,shallow-water delta deposits were dominant,and migratory medium–thick sand bodies were developed.Restricted paleogeomorphology controlled the sand body distribution,while non-restricted paleogeomorphology had little effect on the sand body distribution.Based on reservoir characterization,the fault sealing type and reservoir updip pinch-out type structural lithological traps are proposed as the main directions for future exploration and development in the Xihu sag.

Turbidite Dynamics and Hydrocarbon Reservoir Formation in the Tano Basin: A Coastal West African Perspective

This study examines the turbidite dynamics and hydrocarbon reservoir formation in Ghana’s Tano Basin, which is located in coastal West Africa. Through an exploration of geological processes spanning millions of years, we uncover key factors shaping hydrocarbon accumulation, including source rock richness, temperature, pressure, and geological structures. The research offers valuable insights applicable to exploration, management, and sustainable resource exploitation in coastal West Africa. It facilitates the identification of exploration targets with higher hydrocarbon potential, enables the anticipation of reservoir potential within the Tano Basin, and assists in tailoring exploration and management strategies to specific geological conditions of the Tano Basin. Analysis of fluvial channels sheds light on their impact on landscape formation and hydrocarbon exploration. The investigation into turbidite systems unveils intricate interactions involving tectonics, sea-level fluctuations, and sedimentation patterns, influencing the development of reservoirs. An understanding of sediment transport and depositional settings is essential for efficient reservoir management. Geomorphological features, such as channels, submarine canyons, and distinct channel types, are essential in this situation. A detailed examination of turbidite channel structures, encompassing canyons, channel complexes, convex channels, and U-shaped channels, provides valuable insights and aids in identifying exploration targets like basal lag, channel levees, and lobes. These findings underscore the enduring significance of turbidite systems as conduits for sediment transport, contributing to enhanced reservoir management and efficient hydrocarbon production. The study also highlights how important it is to examine the configuration of sedimentary layers, stacking patterns, and angular laminated facies to identify turbidites, understand reservoir distribution, and improve well design. The dynamic nature of turbidite systems, influenced by basin characteristics such as shape and slope, is highlighted. The research provides valuable insights essential for successful hydrocarbon exploration, reservoir management, and sustainable resource exploitation in coastal West Africa.

Pore Structure Characterization of Clay Minerals in the Lower Karamay Formation Conglomerate Reservoir in the Junggar Basin and its Impact on Hydrocarbon Storage and Seepage

The micro-nano pore structure of conglomerate in the Lower Karamay Formation of the Xinjiang Oilfield,Junggar Basin,northern China is characterized to predict its impact on fluid reserves and seepage.Authigenic clay minerals are mainly kaolinite(67%),followed by an illite/smectite mixed layer(18%),illite(10%),and chlorite(5%).For kaolinite,pore throats between 0–200 nm are dominant,accounting for 90%of the total pore throats.For illite/smectite mixed layer,pore throats also between 0–200 nm account for nearly 80%,while pore throats between 200-500 nm only account for 15%.For illite,pore throats below 100 nm account for about 80%,while pore throats in the range of 100–500 nm only account for 20%.For chlorite,most throats are below 200 nm.The pore roundness of illite is the highest,while the pore roundness of chlorite is relatively lower.The lower limits of the dynamic and static pore throat radii are 42.128 nm and 72.42 nm,respectively.The theoretical contribution rates of the illite/smectite mixed layer,kaolinite,illite and chlorite to storage/seepage are 60%/45.86%,52.72%/38.18%,37.07%/28.78%and 32.97%/26.3%,respectively.Therefore,the contribution rates of clay minerals in the study area are as follows:illite/smectite mixed layer,kaolinite,illite and chlorite.

Analytical models & type-curve matching techniques for reservoir characterization using wellbore storage dominated flow regime

The applicability of early time data in reservoir characterization is not always considered worthy.Early time data is usually controlled by wellbore storage effect.This effect may last for pseudo-radial flow or even boundary dominated flow.Eliminating this effect is an option for restoring real data.Using the data with this effect is another option that could be used successfully for reservoir characterization.This paper introduces new techniques for restoring disrupted data by wellbore storage at early time production.The proposed techniques are applicable for reservoirs depleted by horizontal wells and hydraulic fractures.Several analytical models describe early time data,controlled by wellbore storage effect,have been generated for both horizontal wells and horizontal wells intersecting multiple hydraulic fractures.The relationships of the peak points(humps)with the pressure,pressure derivative and production time have been mathematically formulated in this study for different wellbore storage coefficients.For horizontal wells,a complete set of type curves has been included for different wellbore lengths,skin factors and wellbore storage coefficients.Another complete set of type curves has been established for fractured formations based on the number of hydraulic fractures,spacing between fractures,and wellbore storage coefficient.The study has shown that early radial flow for short to moderate horizontal wells is the most affected by wellbore storage while for long horizontal wells;early linear flow is the most affected flow regime by wellbore storage effect.The study has also emphasized the applicability of early time data for characterizing the formations even though they could be controlled by wellbore storage effect.As a matter of fact,this paper has found out that wellbore storage dominated flow could have remarkable relationships with the other flow regimes might be developed during the entire production times.These relationships can be used to properly describe the formations and quantify some of their characteristics.

Binary Level Set Methods for Dynamic Reservoir Characterization by Operator Splitting Scheme

In this paper,operator splitting scheme for dynamic reservoir characterization by binary level set method is employed.For this problem,the absolute permeability of the two-phase porous medium flow can be simulated by the constrained augmented Lagrangian optimization method with well data and seismic time-lapse data.By transforming the constrained optimization problem in an unconstrained one,the saddle point problem can be solved by Uzawas algorithms with operator splitting scheme,which is based on the essence of binary level set method.Both the simple and complicated numerical examples demonstrate that the given algorithms are stable and efficient and the absolute permeability can be satisfactorily recovered.

3D geocellular modeling for reservoir characterization of lacustrine turbidite reservoirs:Submember 3 of the third member of the Eocene Shahejie Formation,Dongying depression,Eastern China

3D geocellular modeling is increasingly essential in the petroleum industry;it brings together all petroleum disciplines,and it is commonly used in simulation and production forecast.However,modeling slope and deep-water turbidite reservoirs using conventional modeling methods pose a significant challenge due to the structural complexity and thin-beds associated with these reservoirs.Through the innovative modeling technology of PaleoScan,the reservoirs in Sub member 3 of the third member of the Shahejie Formation are modeled to understand the structural framework.The resulting model is populated with petrophysical properties i.e.,porosity and permeability to predict their lateral and vertical distribution within these sandstone reservoirs.The study suggests that the reservoir in the highstand system tract(HST)is characterized by the clinoforms configuration framework.The reservoir is highly faulted mainly in the northern and southeastern parts of the depression.The sedimentary layers are deposited across the slope and downlapping,thinning,and terminating toward to the west.The two isochore surface maps reveal sediment thickness variation and depositional trends within each individual depositional layer.The zones or areas that corresponds to low values on the thickness maps suggest minor uplifts associated with intensive faulting in the Eocene period.These topographical highs played a fundamental role in distributing the sediments delivered to the basin from distant sources.The maps reveal that sediments that filled the basin appear to come from different source points,primarily delivered from the north,southeast,and northeast of the basin with varying depositional trends.The modeled porosity and permeability indicate that the delta fed turbidite reservoirs are characterized by medium to high porosity values of 10e20%and low to medium permeability values of 30-410mD,respectively.The porosity values increase to the southeast and toward the basinwards(west)while permeability varies within the individual sedimentary layers.The distribution of porosity and permeability is not uniform vertically.This suggests the presence of mixed none-reservoir layers with locally and periodically deposited sandstone reservoirs within the stratigraphic during rapid delta progradation.The HST is characterized by six different delta progradation cycles;each phase produced locally deposited lacustrine turbidite sandstones in the basin,which are essential reservoirs in this Formation.The innovative PaleoScan interpretation technology has successfully created a high-resolution 3D reservoir model of this complex geology-such innovative technology is vital to similar complex geology globally.

A robust deep structured prediction model for petroleum reservoir characterization using pressure transient test data

A robust deep learning model consisting of long short-term memory and fully connected neural net-works has been proposed to automatically interpret homogeneous petroleum reservoirs having infinite,no flow,and constant pressure outer boundary conditions.The pressure change data recorded during the well test operation along with its derivative is input into the model to perform the classification for identifying the reservoir model and,further,regression to estimate output parameter.Gaussian noise was added to analytical models while generating the synthetic training data.The hyperparameters were regulated to perform model optimization,resulting in a batch size of 64,Adam optimization algorithm,learning rate of 0.01,and 80:10:10 data split ratio as the best choices of hyperparameters.The perfor-mance accuracy also increased with an increase in the number of samples during training.Suitable classification and regression metrics have been used to evaluate the performance of the models.The paper also demonstrates the prediction performance of the optimized model using simulated and actual oil well pressure drawdown test cases.The proposed model achieved minimum and maximum relative errors of 0.0019 and 0.0308,respectively,in estimating output for the simulated test cases and relative error of 0.0319 for the real test case.

Characterization of favorable lithofacies in tight sandstone reservoirs and its significance for gas exploration and exploitation: A case study of the 2nd Member of Triassic Xujiahe Formation in the Xinchang area, Sichuan Basin

By using core,logging curves,and experiment data,favorable lithofacies types in the 2 nd Member of Triassic Xujiahe Formation in the Xinchang area,Sichuan Basin were classified,standard of the favorable lithofacies was established,planar distribution regularities of the favorable lithofacies were identified,and forming mechanisms of the favorable lithofacies and their control effect on production were examined.(1)The 2 nd Member of Xujiahe Formation has twelve types of lithofacies,among which multiple layer medium-coarse grain sandstone lithofacies,parallel bedding medium-coarse grain sandstone lithofacies,massive bedding medium-coarse grain sandstone lithofacies,inclined bedding medium-coarse grain sandstone lithofacies,and charcoal-bearing medium-coarse grain sandstone lithofacies with better physical properties and higher gas content are favorable lithofacies;they feature low gamma,low neutron porosity,low resistivity,and high acoustic travel time on logging curves.(2)The sedimentary process controls spatial distribution of sand bodies which are the material basis of the favorable lithofacies;post diagenetic fluids would differentially reconstruct the favorable lithofacies;tectonic activities and abnormal formation pressure made strata slide along the weakness plane,giving rise to fractures in different types of rocks,which can enhance the reservoir permeability significantly.(3)The development degree of favorable lithofacies is a major factor affecting stable production of gas well.

Evaluation of Hydrocarbon Potential Using AVO Analysis in the FORMAT Field, Niger Delta Basin, Nigeria

The study involved the evaluation of the hydrocarbon potential of FORMAT Field, coastal swamp depobelt Niger delta, Nigeria to obtain a more efficient reservoir characterization and fluid properties identification. Despite advances in seismic data interpretation using traditional 3D seismic data interpretation, obtaining adequate reservoir characteristics at the finest level had proved very challenging with often disappointing results. A method that integrates the amplitude variation with offfset (AVO) analysis is hereby proposed to better illuminate the reservoir. The Hampson Russell 10.3 was used to integrate and study the available seismic and well data. The reservoir of interest was delineated using the available suite of petrophysical data. This was marked by low gamma ray, high resistivity, and low acoustic impedance between a true subsea vertical depth (TVDss) range of 10,350 - 10,450 ft. The AVO fluid substitution yielded a decrease in the density values of pure gas (2.3 - 1.6 g/cc), pure oil (2.3 - 1.8 g/cc) while the Poisson pure brine increased (2.3 to 2.8 g/cc). Result from FORMAT 26 plots yielded a negative intercept and negative gradient at the top and a positive intercept and positive gradient at the Base which conforms to Class III AVO anomaly. FORMAT 30 plots yielded a negative intercept and positive gradient at the top and a positive intercept and negative gradient at the Base which conforms to class IV AVO anomaly. AVO attribute volume slices decreased in the Poisson ratio (0.96 to - 1.0) indicating that the reservoir contains hydrocarbon. The s-wave reflectivity and the product of the intercept and gradient further clarified that there was a Class 3 gas sand in the reservoir and the possibility of a Class 4 gas sand anomaly in that same reservoir.

Performance of Continuous Wavelet Transform over Fourier Transform in Features Resolutions

This study presents a comparative analysis of two image enhancement techniques, Continuous Wavelet Transform (CWT) and Fast Fourier Transform (FFT), in the context of improving the clarity of high-quality 3D seismic data obtained from the Tano Basin in West Africa, Ghana. The research focuses on a comparative analysis of image clarity in seismic attribute analysis to facilitate the identification of reservoir features within the subsurface structures. The findings of the study indicate that CWT has a significant advantage over FFT in terms of image quality and identifying subsurface structures. The results demonstrate the superior performance of CWT in providing a better representation, making it more effective for seismic attribute analysis. The study highlights the importance of choosing the appropriate image enhancement technique based on the specific application needs and the broader context of the study. While CWT provides high-quality images and superior performance in identifying subsurface structures, the selection between these methods should be made judiciously, taking into account the objectives of the study and the characteristics of the signals being analyzed. The research provides valuable insights into the decision-making process for selecting image enhancement techniques in seismic data analysis, helping researchers and practitioners make informed choices that cater to the unique requirements of their studies. Ultimately, this study contributes to the advancement of the field of subsurface imaging and geological feature identification.

A Comprehensive Model for Evaluating Coalbed Methane Reservoirs in China

Coalbed methane reservoir （CBMR） evaluation is important for choosing the prospective target area for coalbed methane exploration and production. This study aims at identifying the characteristic parameters and methods to evaluate CBMR. Based on the geological surveys, laboratory measurements and field works, a four-level analytic hierarchy process （AHP） model for CBMR evaluation is proposed. In this model, different weights are prioritized and assigned on the basis of three main criteria （including reservoir physical property, storage capacity and geological characteristics）, 15 sub-criteria, and 18 technical alternatives; the later of which are discussed in detail. The model was applied to evaluate the CBMR of the Permo-Carboniferous coals in the Qinshui Basin, North China. This GIS-based fuzzy AHP comprehensive model can be used for the evaluation of CBMR of medium-high rank （mean maximum vitrinite reflectance 〉0.5 %） coal districts in China.

Reservoir stress path and induced seismic anisotropy： results from linking coupled fluid-flow/geomechanical simulation with seismic modelling

We present a workflow linking coupled fluid-flow and geomechanical simulation with seismic modelling to predict seismic anisotropy induced by non-hydrostatic stress changes. We generate seismic models from coupled simulations to examine the relationship between reservoir geometry, stress path and seismic anisotropy. The results indicate that geometry influences the evolution of stress,which leads to stress-induced seismic anisotropy. Although stress anisotropy is high for the small reservoir, the effect of stress arching and the ability of the side-burden to support the excess load limit the overall change in effective stress and hence seismic anisotropy. For the extensive reservoir, stress anisotropy and induced seismic anisotropy are high. The extensive and elongate reservoirs experience significant compaction, where the inefficiency of the developed stress arching in the side-burden cannot support the excess load.The elongate reservoir displays significant stress asymmetry,with seismic anisotropy developing predominantly along the long-edge of the reservoir. We show that the link betweenstress path parameters and seismic anisotropy is complex,where the anisotropic symmetry is controlled not only by model geometry but also the nonlinear rock physics model used. Nevertheless, a workflow has been developed to model seismic anisotropy induced by non-hydrostatic stress changes, allowing field observations of anisotropy to be linked with geomechanical models.

Fine quantitative characterization of high-H2S gas reservoirs under the influence of liquid sulfur deposition and adsorption

In order to clarify the influence of liquid sulfur deposition and adsorption to high-H2S gas reservoirs,three types of natural cores with typical carbonate pore structures were selected for high-temperature and high-pressure core displacement experiments.Fine quantitative characterization of the cores in three steady states(original,after sulfur injection,and after gas flooding)was carried out using the nuclear magnetic resonance(NMR)transverse relaxation time spectrum and imaging,X-ray computer tomography(CT)of full-diameter cores,basic physical property testing,and field emission scanning electron microscopy imaging.The loss of pore volume caused by sulfur deposition and adsorption mainly comes from the medium and large pores with sizes bigger than 1000μm.Liquid sulfur has a stronger adsorption and deposition ability in smaller pore spaces,and causes greater damage to reservoirs with poor original pore structures.The pore structure of the three types of carbonate reservoirs shows multiple fractal characteristics.The worse the pore structure,the greater the change of internal pore distribution caused by liquid sulfur deposition and adsorption,and the stronger the heterogeneity.Liquid sulfur deposition and adsorption change the pore size distribution,pore connectivity,and heterogeneity of the rock,which further changes the physical properties of the reservoir.After sulfur injection and gas flooding,the permeability of TypeⅠreservoirs with good physical properties decreased by 16%,and that of TypesⅡandⅢreservoirs with poor physical properties decreased by 90%or more,suggesting an extremely high damage.This indicates that the worse the initial physical properties,the greater the damage of liquid sulfur deposition and adsorption.Liquid sulfur is adsorbed and deposited in different types of pore space in the forms of flocculence,cobweb,or retinitis,causing different changes in the pore structure and physical property of the reservoir.

Factor Controlling Reservoir Properties and Flow Unit Determination in the Ilam Formation of Dezfol Embayment at Zagros Fold-Thrust Belt, Southwest of Iran

Dezfol embayment in the Southwest of Iran is located in the Zagros fold-thrust belt, which is one of the world’s largest petroleum provinces. Ilam Formation (Santonian-Companian) is one of the reservoir formations in this area that has been less studied. This paper focused on reservoir properties in this formation using petrography and petrophysics data. According to the petrography studies Ilam Formation composed of limestone as dominant lithology. Detailed petrographic analyses, have led to identification of 10 micro-facies which are represented as a carbonate ramp depositional model. Also petrographic analyses are revealed that cementation, dissolution, compaction and dolomitization are most important digenetic processes. Detailed petrographic analyses and petrophysics data showed that due to mud-supported nature of more facies (inherited low reservoir potential from their depositional settings), diagenetic process plays an important role in increasing of reservoir quality. However cementation and dissolution had negative and positive effects on Ilam reservoir formation, respectively. Finally at the end for better correlation and to create a flow unit, according to the petrography data and using petrophysics log, this reservoir is divided into 5 units (flow unite) by using Geolog software and then they have been correlated across the field.

Shale Gas Characterization of Sembar Formation, Khipro Area, Pakistan

This study pertains to the evaluation of shale gas and rock physics properties of this area with respect to its total organic content of Sember Formation, Khiproarea, Pakistan. We use well logs data for this study. The Khipro area is prominent in the Lower Indus Basin for its hydrocarbon (oil and gas) structural traps. In shale gas evaluation, TOC of Sember Formation is estimated. The analysis has been done with the help of the wire line data of the well Bilal North-01. The presence of shale gas in the study area is analyzed with the help of different techniques. Rock physics and petrophysical analysis have been done in order to get the properties of the area related to the shale gas evaluation.

Model-constrained and data-driven double-supervision acoustic impedance inversion

Seismic impedance inversion is an important technique for structure identification and reservoir prediction.Model-based and data-driven impedance inversion are the commonly used inversion methods.In practice,the geophysical inversion problem is essentially an ill-posedness problem,which means that there are many solutions corresponding to the same seismic data.Therefore,regularization schemes,which can provide stable and unique inversion results to some extent,have been introduced into the objective function as constrain terms.Among them,given a low-frequency initial impedance model is the most commonly used regularization method,which can provide a smooth and stable solution.However,this model-based inversion method relies heavily on the initial model and the inversion result is band limited to the effective frequency bandwidth of seismic data,which cannot effectively improve the seismic vertical resolution and is difficult to be applied to complex structural regions.Therefore,we propose a data-driven approach for high-resolution impedance inversion based on the bidirectional long short-term memory recurrent neural network,which regards seismic data as time-series rather than image-like patches.Compared with the model-based inversion method,the data-driven approach provides higher resolution inversion results,which demonstrates the effectiveness of the data-driven method for recovering the high-frequency components.However,judging from the inversion results for characterization the spatial distribution of thin-layer sands,the accuracy of high-frequency components is difficult to guarantee.Therefore,we add the model constraint to the objective function to overcome the shortages of relying only on the data-driven schemes.First,constructing the supervisor1 based on the bidirectional long short-term memory recurrent neural network,which provides the predicted impedance with higher resolution.Then,convolution constraint as supervisor2 is introduced into the objective function to guarantee the reliability and accuracy of the inversion results,which makes the synthetic seismic data obtained from the inversion result consistent with the input data.Finally,we test the proposed scheme based on the synthetic and field seismic data.Compared to model-based and purely data-driven impedance inversion methods,the proposed approach provides more accurate and reliable inversion results while with higher vertical resolution and better spatial continuity.The inversion results accurately characterize the spatial distribution relationship of thin sands.The model tests demonstrate that the model-constrained and data-driven impedance inversion scheme can effectively improve the thin-layer structure characterization based on the seismic data.Moreover,tests on the oil field data indicate the practicality and adaptability of the proposed method.

Experimental Evaluation of the Mobility Profile of Enhanced Oil Recovery Gases

The mobility profiles of gases used in enhanced oil recovery (EOR) have been thoroughly investigated through the coupling operations of data mining of oilfield data and experimental data analyses. Mobility as an EOR objective function has not been previously applied to characterize potential reservoirs for EOR selection and application, even though it is a robust combinatorial function that benefits from two petrophysical variables, permeability and viscosity. The data mining approach identified mobility as a reliable objective function for reservoir characterisation. The data distribution and clustering results indicate that Gas EOR reservoirs have relatively higher mean mobility than Thermal, Microbial and Chemical EOR reservoirs. The experimental approach investigated EOR gases, CO2, CH4, N2, and Air. A modified Darcy Equation of State for gas flow through porous media was applied to evaluate which gas would competitively attain the oil displacement optimisation criterion for mobility ratio, M ≤ 1. Coupling the data mining with the experimental data results reveals that gas reservoirs can be further categorized by mobility. CH4 (18.16 mD/cp) was observed to have the highest mobility followed by Air (14.60 mD/cp), N2 (13.61 mD/cp), and CO2 (12.96 mD/cp). The gas mobility order significantly corresponds with the mobility distribution of reservoirs that implemented gas EOR processes. It was concluded that CO2 offers relatively lower mobility, therefore, it is the most competitive EOR gas to approach the mobility ratio criterion of unity or less.

Fine Single Channel Identification Controlled by Sedimentary Facies—Taking KLA Oilfield as an Example

The Neogene fluvial reservoir in the Bohai oilfield is one of the leading development horizons for increasing reserves and production in the Bohai oilfield. However, the development of offshore fluvial reservoirs is faced with the problems of thin reservoir thickness, narrow plane width, rapid lateral change, and thin well pattern. Taking the KLA oilfield as an example, this paper discusses the nuanced characterization and configuration of a single channel controlled by sedimentary facies to guide developing offshore river facies’ narrow channel main control oilfield. Firstly, based on a large number of core data, the acceptable sedimentary facies identification is realized, the sedimentary model of the study area is established, the delicate calibration of logging facies and seismic facies is realized under the constraint of the sedimentary model, and a set of technical methods for nuanced reservoir characterization guided by seismic sedimentology is summarized, to realize the boundary identification of composite channel configuration and further realize the nuanced characterization of the single narrow channel. Based on this set of technology, it guides the smooth implementation of horizontal wells in the oilfield. The drilling encounter rate of the reservoir in the horizontal section of the single well exceeds 90%, ensuring the injection production connectivity and increasing the reserve production rate by more than 10%.