Reservoir characteristics and formation model of Upper Carboniferous bauxite series in eastern Ordos Basin,NW China

Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore characteristics of the Upper Carboniferous bauxite series in eastern Ordos Basin were analyzed to reveal the formation and evolution process of the bauxite reservoirs.A petrological nomenclature and classification scheme for bauxitic rocks based on three units(aluminum hydroxides,iron minerals and clay minerals)is proposed.It is found that bauxitic mudstone is in the form of dense massive and clastic structures,while the(clayey)bauxite is of dense massive,pisolite,oolite,porous soil and clastic structures.Both bauxitic mudstone and bauxite reservoirs develop dissolution pores,intercrystalline pores,and microfractures as the dominant gas storage space,with the porosity less than 10% and mesopores in dominance.The bauxite series in the North China Craton can be divided into five sections,i.e.,ferrilite(Shanxi-style iron ore,section A),bauxitic mudstone(section B),bauxite(section C),bauxite mudstone(debris-containing,section D)and dark mudstone-coal section(section E).The burrow/funnel filling,lenticular,layered/massive bauxite deposits occur separately in the karst platforms,gentle slopes and low-lying areas.The karst platforms and gentle slopes are conducive to surface water leaching,with strong karstification,well-developed pores,large reservoir thickness and good physical properties,but poor strata continuity.The low-lying areas have poor physical properties but relatively continuous and stable reservoirs.The gas enrichment in bauxites is jointly controlled by source rock,reservoir rock and fractures.This recognition provides geological basis for the exploration and development of natural gas in the Upper Carboniferous in the study area and similar bauxite systems.

Geological conditions and reservoir characteristics of various shales in major shalehosted regions of China

China is home to shales of three facies:Marine shale,continental shale,and marine-continental transitional shale.Different types of shale gas are associated with significantly different formation conditions and major controlling factors.This study compared the geological characteristics of various shales and analyzed the influences of different parameters on the formation and accumulation of shale gas.In general,shales in China’s several regions exhibit high total organic carbon(TOC)contents,which lays a sound material basis for shale gas generation.Marine strata generally show high degrees of thermal evolution.In contrast,continental shales manifest low degrees of thermal evolution,necessitating focusing on areas with relatively high degrees of thermal evolution in the process of shale gas surveys for these shales.The shales of the Wufeng and Silurian formations constitute the most favorable shale gas reservoirs since they exhibit the highest porosity among the three types of shales.These shales are followed by those in the Niutitang and Longtan formations.In contrast,the shales of the Doushantuo,Yanchang,and Qingshankou formations manifest low porosities.Furthermore,the shales of the Wufeng and Longmaxi formations exhibit high brittle mineral contents.Despite a low siliceous mineral content,the shales of the Doushantuo Formation feature a high carbonate mineral content,which can increase the shales’brittleness to some extent.For marine-continental transitional shales,where thin interbeds of tight sandstone with unequal thicknesses are generally found,it is recommended that fracturing combined with drainage of multiple sets of lithologic strata should be employed to enhance their shale gas production.

Baoziwan-Majiashan Area of Jiyuan Oilfield Analysis of Reservoir Characteristics and Main Control Factors in Long 4 5 Section

Based on the sheet, scanning electron microscope and high pressure mercury analysis method, this paper takes Jiyuan oilfield-Ma Jia mountain district 4 5 sandstone reservoir as the research object, from the reservoir petrology, pore type and porosity, permeability, the system analyzed the reservoir characteristics and its control factors. The results show that the sandstone in the 4 5 section of Baoziwan-Majiashan area of Jiyuan oilfield is fine in size and high in filling content. The pore types were dominated by intergranular pores and dissolved pores, with a low face rate. The reservoir property is relatively poor, with mean porosity of 11.11% and mean permeability of 1.16 × 10−3 µm2. In the low porous, low otonic background, the development of relatively high pore hypertonic areas. Compaction and cementation should play a destructive role in reservoir properties, and dissolution should play a positive role in reservoir properties. Compaction adjusts the migration of clay minerals and miscellaneous bases in the original sediment in the study area, greatly reducing the porosity and permeability of the reservoir;the development of the cement cement, carbonate cementation and some quartz secondary compounds reduces the storage space;the dissolution effect, especially the secondary dissolution pores of the reservoir, which obviously improves the properties of the reservoir.

Reservoir Characteristics and Main Controlling Factors of the Flow III Section of the K Oilfield in the Weixinan Depression

In order to clarify the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression, a study on the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression has been carried out by utilizing the data of cores, casting thin sections, physical property tests and logging wells. The results show that the lithology of the reservoir in the flow three section of the study area is dominated by coarse sandstone and medium sandstone, followed by conglomerate-bearing sandstone and sand conglomerate. The porosity is mainly distributed in the range of medium-high porosity, and the permeability is mainly medium seepage, and the overall physical properties are good. The three sections of the stream in the study area mainly include four sedimentary microphases, namely, underwater diversion channel, estuarine dam, mat sand and inter-diversion bay. The underwater diversion channel has the best physical properties, characterized by coarse grains and low mud content. The medium and coarse sand content of various lithologic reservoirs is the main factor in the formation of high-quality reservoirs. Rock-forming action is an important factor affecting the physical properties of local reservoirs, comparing the compaction, cementation and dissolution between different sedimentary microphases, the underwater diverging river has the lowest rate of compaction and pore reduction, the highest rate of pore increase by dissolution, and the best physical properties. Therefore, the weakly cemented-strongly dissolved coarse sandstone phase developed in the microphase of the underwater diversion channel in section 3 of the flow in the study area is the most favorable reservoir.

Reservoir characteristics of Datta Formation (Early Jurassic), Marwat-Khisor Ranges, sub-Himalayas, Pakistan

The present work has been accomplished to carry out a detailed study of the characteristics of the Early Jurassic Datta Formation of Trans-Indus Ranges, Pakistan. The discovery of Saib well-1 (Gas and condensate discovery from Jurassic limestone) in the study basin takes an active interest in carrying out extensive exploration activities in the same basin. Jurassic rocks especially Datta Sandstone and Samana Suk Limestone are acting as good reservoirs. The study unit consists of variegated sandstone interbedded with siltstone, carbonaceous clay, and shale and coal stringer. For the current work, two stratigraphic sections (Pezu and Abbo Wanda) have been measured. To examine its sedimentology, depositional environment, diagenetic settings, and reservoir characteristics, a detailed study was conducted and various laboratory techniques have been utilized. About 95 rock samples from the bottom to the top of both sections were collected, and 50 rock samples have been selected for thin section analysis and were examined under a polarizing microscope to show their mineralogical composition, diagenesis, and their reservoir characteristics. XRD (X-ray diffraction), Cathodoluminescence (CL), SEM (Scanning electron microscope) with EDS (Energy-dispersive spectroscope), and Core plug porosity and permeability analysis have been used to interpret its chemical and mineralogical composition and its reservoir characteristics, respectively. Based on field observations and thin section analysis, four depositional facies and six lithofacies have been established. The sedimentary structures, depositional facies, and lithofacies indicate that Datta Formation was deposited in a deltaic environment. Compactions, cementation, fracturing and dissolution can greatly affect the quality of reservoir rock. Based on thin section and SEM analysis, large numbers of primary pores, fracture and secondary pores were observed and connectivity between the pores is good, and at some places, these pores were filled through the authigenic clay minerals like kaolinite, mixed layers illite/smectite and chlorite that influences the reservoir characteristics. Primary pores (thin section) and secondary pores (dissolution pores) and core plug porosity and permeability data (porosity 13.23%-26.89% and permeability 0.12 to 149 mD) shows that Datta Formation has a good reservoir quality.

Research on Pore Structure and Fractal Characteristics of Tight Sandstone Reservoir Based on High-Pressure Mercury Injection Method

Pore structure is the key element of tight sandstone reservoir, which restricts the accumulation and flow of oil and gas in the reservoir. At present, reservoir pore structure is the focus and difficulty of unconventional oil and gas exploration and development research. The tight sandstone reservoir in the Chang 4 + 5 member of the Upper Triassic Yanchang Formation is the main reservoir for oil and gas exploration in G area. At present, there is little research on its pore structure and fractal characteristics, which to some extent affects the progress of exploration and development. This paper selects the tight core samples of the Chang 4 + 5 member in the southern edge of the Ordos Basin, and based on the high-pressure mercury intrusion experiment, uses fractal theory to study the pore structure and fractal characteristics of the reservoir in the study area, thus providing theoretical basis for the evaluation and exploration and development of the Chang 4 + 5 tight reservoir in the G area. The research results show that the lithology of the Chang 4 + 5 tight sandstone reservoir in the southern edge of the Ordos Basin is mainly feldspathic sandstone, with the highest feldspar content, followed by quartz, and the clay mineral is mainly chlorite. The reservoir has poor physical properties and strong heterogeneity. There are three main fractal characteristics in Chang 4 + 5 reservoir in G area: the fractal curve of Type I reservoir sample is in two segments, the relatively large pore has certain fractal characteristics, the pore structure is relatively regular, and the heterogeneity is weak;Relatively small pores have no fractal characteristics and pore structure is irregular. The fractal curve of Type II reservoir samples shows a three-segment pattern, and each pore size range has certain fractal characteristics, and it gradually gets better with the increase of pore size. The fractal curve of Type III reservoir samples presents a similar one-segment pattern, and the fractal dimension exceeds the upper limit of 3. It is considered that the full pore size of this type of reservoir does not have fractal characteristics, the pore throat is completely irregular or the surface is rough, and the heterogeneity is very strong.

Reservoir Characteristics and Favorable Area Prediction of Chang-6 Reservoir in Zhouguan Area, Ordos Basin

Based on the analysis of a large number of core samples, logging results, logging interpretation data and dynamic data in the study area, the characteristics of Chang 6 reservoir in Zhouguan area of Baihe area are studied, and the favorable reservoir areas in the study area are predicted. The results show that the lithology of Chang 6 reservoir is mainly light gray and gray fine-grained to very fine-grained feldspar lithic sandstone. The pore types are mainly residual intergranular pores and feldspar dissolved pores, including debris dissolved pores and microfractures. The porosity and permeability values are low, which belongs to low porosity-low permeability and ultra-low permeability reservoirs. According to the reservoir distribution characteristics and related data, the Chang 6 reservoir in the study area is divided into two types, mainly Class II and Class III reservoirs. The comprehensive evaluation predicts that the spatial distribution of the favorable area of Chang 6 reservoir is not uniform, but the distribution area is large, which has broad exploration and development value, and provides the necessary conditions for the distribution study of the favorable oil-bearing zone in this area and the preparation for the next exploration and development.

Experimental Study on Phase Characteristics of CO2 Injection in BZ13-2 Strong Volatile Oil Reservoir in Bohai Sea Buried Hills

BZ13-2 oil field is a deep submerged strongly volatile reservoir in Bohai Sea. This oil reservoir has the characteristics of high gas oil ratio and small difference in formation pressure and saturation point pressure. It usually adopts gas injection development to avoid crude oil degassing and fast decreasing production capacity. However, the phase characteristics and miscibility mechanism of this high-temperature and high-pressure fluid after gas injection are not clear. Therefore, it is necessary to study the feasibility of CO2 injection to improve oil recovery in near critical volatile oil reservoirs through CO2 injection experiments. In the early stage of the depletion experiment, the content of heavy components in the remaining oil increased significantly, so the depletion method is not conducive to the development of such reservoirs. With the increase of CO2 injection, the volumetric expansion coefficient of formation crude oil increases significantly, while the saturation pressure and formation crude oil viscosity remain basically unchanged. The minimum miscible pressure experiment shows that CO2 injection under formation pressure conditions can achieve multiphase miscibility. Based on experimental research results, the BZ13-2 oilfield is suitable for early gas injection development and can significantly improve recovery.

The source and formation characteristics of the Zhujiadun gas reservoirs in the Yancheng Sag, Subei Basin

The Yancheng Sag is a favorable exploration area in the Subei Basin. However, the key geological understanding of the natural gas source and reservoir formation characteristics of the sag is still controversial. Based on a set of organic geochemical experiments conducted on natural gas and associated condensate oil of the first member of the Funing Formation (E1f1) in well YCh5 and well data analysis, the oil-gas resources and reservoir formation model in the Zhujiadun gas reservoir in the Yancheng Sag, Subei Basin, were investigated. The results of this study are as follows. (1) The natural gas in the Zhujiadun gas reservoir is dry gas with high methane content, low heavy hydrocarbon content, and high maturity. The characteristics of carbon and hydrogen isotopes in the natural gas indicate that the natural gas is oil-cracked gas, which mainly originates from the source rocks of the Permian Qixia Formation. (2) The condensate oil from well YCh5 with a high degree of maturity has a high pristane/phytane ratio, low gamma-paraffin abundance, and low tricyclic terpene abundance, indicating a mixture of the Upper Paleozoic condensate oil and Cenozoic crude oil. The saturated and aromatic hydrocarbons have similar δ13C values to the Cenozoic continental crude oil. These features suggest two sources of condensate oil. (3) Oils generated from the source rocks of the Qixia Formation were cracked into highly mature gas after deep burial, which migrated along large faults into the sandstones of the E1f1 and K1t1 members. This type of reservoir was effectively preserved beneath the overlying mudstone cap rocks. Therefore, it can be inferred that a play fairway might occur in the eastern zone of the faults connected to the Paleozoic source rocks in the Yancheng Sag since this zone has similar petroleum geological conditions to well YCh5. Therefore, this zone is a favorable area for further exploration.

RESERVOIR CHARACTERISTICS OF JURASSIC SHAXIMIAO FORMATION, WESTERN SICHUAN BASIN

研究表明，川西地区沙溪庙组储层主要储集岩为长石砂岩、岩屑长石砂岩，其次为岩屑砂岩、长石岩屑砂岩及岩屑石英砂岩。储集空间分为孔、缝，其中主要储集空间为粒间溶孔，其次为残余粒间孔和粒内溶孔。喉道类型以管状和粒间裂隙为主，属细一微喉型。储层孔隙结构差，具有孔隙小、喉道窄、有效连通孔隙体积小和中一高排驱压力的特征，总体属于低一中孔、低一中渗，局部存在高孔高渗的常规储层，非均质性强。在此基础上通过对储层发育控制因素、储集砂体展布及有利储集区带的研究，为川西沙溪庙组的油气藏勘探开发提供了重要支撑。

Geologic Characteristics of Volcanic Hydrocarbon Reservoirs and Exploration Directions in China

Volcanic rocks are distributed widely in China, which are important exploration targets. By analyzing many discovered volcanic hydrocarbon reservoirs all over the world, the authors summarized the geologic characteristics of the formation of volcanic hydrocarbon reservoirs in China, and gave further exploration directions and advices. （1） There are mainly Carboniferous-Permian, Jurassic-Cretaceous, Paleogene-Neogene volcanic rocks in oil- and gas-bearing basins in China, which are mainly distributed in the Junggar Basin, Songliao Basin, Bohai Bay Basin, etc. There are mainly intermediate rocks and acidic rocks in east China, and intermediate rocks and basic rocks in west China. They primarily develop in intracontinentai rift settings and island arc environments. （2） Porefissure reservoirs are distributed widely in basins, which are volcanic rocks mainly in explosive and effusive facies. （3） Volcanic hydrocarbon reservoirs are chiefly near-source lithostratigraphic hydrocarbon reservoirs, and the oil and gas accumulation is predominantly controlled by lithotypes, faults and structural positions. （4） Deep-seated oil and gas reservoirs in the Songliao Basin and Carboniferous volcanic hydrocarbon reservoirs in the Junggar Basin are potential giant volcanic gas provinces, the volcanic hydrocarbon reservoirs in the Bohai Bay Basin and Santanghu Basin are favorable for oil and gas reserves increase, and volcanic rocks in the Turpan Basin, Sichuan Basin, Tarim Basin have exploration potentiality. （5） The technology series of oil and gas exploration in volcanic rocks have been preliminarily formed.

Reservoir Characteristics of Lacustrine Shale and Marine Shale:Examples from the Songliao Basin,Bohai Bay Basin and Qiannan Depression

Lacustrine shale from the Qingshankou Formatin of Songliao basin and the Shahejie Formation of Bohai Bay basin, and marine shale from the lower Cambrian Jinmenchong Formation of Qiannan depression were analysed by using rock pyrolysis, TOC （total organic carbon）, XRD （X-ray diffraction）, SEM （scanning electron microscope）, FE-SEM （field emission scanning electron microscope）, high pressure mercury intrusion, and low pressure N2 and CO2 gas adsorption experiments, in aim to reveal their reservoir features. The results show that： （1） the width of micro-pores of all the studied samples mainly ranges from 0.45 to 0.7 nm indicated by CO2 isotherms, and the width of meso-pores is less than 10 nm, with type IV adsorption isotherms and type H2 hysteresis loop, indicative of ＂ink-bottle＂-shaped pores. Good correlations exist among pore volume, surface area and averaged pore diameter, and a good positive correlation exists between micro-pore volume and TOC content; however, there is no obvious correlation between meso-pore volume and TOC content; （2） interparticle pores, pores among the edge of mineral grains and organic matter pores were all identified in marine and lacustrine shale, among which the interparticle pores may be influence by dissolution effect. Not all bitumen develops organic matter pore, and only high to over mature bitumen present pores. Now the description methods of micrometer scale pores developed in shale are very lack. Micro- fractures developed in Jiyang depression and dissolution interparticle pores developed in Songliao Basin should be the accumulation sites for shale oil in lacustrine shale, and can be as sweet spots.

Geochemical characteristics and diagenetic systems of dolomite reservoirs of the Changxing Formation in the eastern Sichuan Basin, China

In order to discuss the relationship between dolomite reservoirs and diagenetic systems of the Changxing Formation, we studied carbon, oxygen and strontium stable isotopes, iron, manganese and strontium trace elements and the Mg/Ca （mol%） ratio, dolomite order degree, and determined that burial dolomitization is the key to controlling the distribution of high quality dolomite reservoir in the Changxing Formation in the eastern Sichuan Basin. The dolomite of the Changxing Formation is divided into four diagenetic systems： （1） penecontemporaneous stage syngenetic brine diagenetic system, （2） early diagenetic stage strata seal brine diagenetic system, （3） middle-late diagenetic stage mixed hot brine diagenetic system and （4） tectonic uplift stage mixed hydrothermal fluid diagenetic system. New understanding of the controlling factors and distribution of dolomite reservoir development is discussed. Reef shoal facies belts controlled regional reservoir distribution and the scale of development. Burial dolomitization of a strata seal brine diagenetic system is the foundation of reservoir development, mainly developing pore reservoir. Burial dolomitization of mixed hot brine diagenetic system expanded the reservoir distribution and improved the reservoir quality, mainly developing pore-vug reservoir. Fracturing and dissolution of a mixed hydrothermal fluid diagenetic system is the key to improving the reservoir quality, mainly developing pore-vug-crack complex reservoirs.

Geological characteristics and accumulation mechanisms of the "continuous" tight gas reservoirs of the Xu2 Member in the middle-south transition region,Sichuan Basin,China

＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source rocks and ＂＇continuous＂ tight gas reservoirs in the Xujiahe Formation of the middle- south transition region, Sichuan Basin. The source rocks of the Xul Member and reservoir rocks of the Xu2 Member are thick （Xul Member： 40 m, Xu2 Member： 120 m） and are distributed continuously in this study area. The results of drilled wells show that the widespread sandstone reservoirs of the Xu2 Member are charged with natural gas. Therefore, the natural gas reservoirs of the Xu2 Member in the middle-south transition region are ＂continuous＂ tight gas reservoirs. The accumulation of ＂continuous＂ tight gas reservoirs is controlled by an adequate driving force of the pressure differences between source rocks and reservoirs, which is demonstrated by a ＂one-dimensional＂ physical simulation experiment. In this simulation, the natural gas of＂continuous＂ tight gas reservoirs moves tbrward with no preferential petroleum migration pathways （PPMP）, and the natural gas saturation of＂continuous＂ tight gas reservoirs is higher than that of conventional reservoirs.

A Model of Hydrothermal Dolomite Reservoir Facies in Precambrian Dolomite, Central Sichuan Basin, SW China and its Geochemical Characteristics

Hydrothermal mineral assemblages and related hydrothermally enhanced fracturing are common in the Precambrian Dengying Formation of Central Sichuan Basin. Petrographic and geochemical analyses of core samples show that the hydrothermal dolomite reservoirs of Dengying Formation consist of four main types of pores in the reservoir facies. These include: 1) hydrothermal dissolution vug(or pore), 2) intercrystalline pore, 3) residual inter-breccia vug(or pore), and 4) enlarged dissolved-fracture. There are three different fabrics dolomite in hydrothermal dolomite reservoirs, namely, saddle dolomite, fine-medium dolomite and micritic dolomite. Micritic dolomite is the original lithology of host rock. Saddle dolomite with curved or irregular crystal faces was directly crystallized from hydrothermal fluids(average temperature 192°C). Fine-medium dolomites are the products of recrystallization of micritic dolomite, resulting in abnormal geochemical characteristics, such as slight depletion of δ^(18)O, significant enrichment of Mn-Fe and ^(87)Sr/^(86)Sr, and positive Eu anomaly. A model for the distribution of various hydrothermal dolomite reservoir facies is proposed here, which incorporates three fundamental geological controls: 1) extensional tectonics and tectono-hydrothermal events(i.e., the Xingkai Taphrogenesis of Late Sinian-Early Cambrian, and Emei Taphrogenesis of Late Permian), 2) hydrothermal fluid storage in clastic rocks with large thickness(e.g., Nanhua System of Chengjiang Formation and part of Doushantuo Formation), and 3) confining bed for hydrothermal fluids(such as, the shale in Qiongzhusi Formation). The supply of hydrothermal fluid is critical. Large basement-rooted faults and associated grid-like fracture system may function as the channels for upward migration of hydrothermal fluid flow. The intersection of the above-mentioned faults(including the conversion fault), especially transtensional sags above negative flower structures on wrench faults can serve as a key target for future hydrocarbon exploration.

Pore Characteristics of the Fine-Grained Tight Reservoirs in the Yabulai Basin, Northwestern China

This work investigated the pore structure characteristics and reservoir features of the finegrained tight reservoirs in the lower member of the Xinhe Formation(J2x1) in the Xiaohu subsag,Yabulai Basin based on core samples through various techniques. Interbedded silt/fine sandstones and mudstones are developed in the study area. Scanning electron microscopy(SEM) images were used to delineate different types of pores, including primary intergranular pores, secondary intergranular and intragranular pores, organic pores and fractures. The pore types were distinguished by pore size, pore area, location and formation process. The pore radii of the fine-grained rocks range from 1 nm to 1.55μm, mainly concentrated between 5 and 300 nm by low pressure N2adsorption and MICP analyses. The pore structure parameters of pore throat size and pore throat sorting coefficient are both positively correlated with porosity, while pore throat sorting coefficient has a negative correlation with permeability. The pore structures of the studied samples are much related to the mineral type and content and grain size, followed by TOC content. In these rocks with relatively low TOC and low maturity, the rigid minerals protect pores with pressure shadow from collapse, and dissolution-related pores contribute a lot to inorganic porosity. In contrast, these rocks with abundant TOC contain a large number of organic pores. The permeability of the fine-grained tight reservoir is mainly dominated by larger pore throats, while a large number of small pores(mostly <0.1 μm) contribute considerably to porosity. These results have deepened our understanding of the interbedded fine-grained tight reservoirs and can be applicable to fine-grained reservoirs in a similar setting.

Characteristics of Shale Reservoir and Sweet Spot Identification of the Lower Cambrian Niutitang Formation in Northwestern Hunan Province, China

The accumulation and productivity of shale gas are mainly controlled by the characteristics of shale reservoirs;study of these characteristics forms the basis for the shale gas exploitation of the Lower Cambrian Niutitang Formation(Fm),Southern China.In this study,core observation and lithology study were conducted along with X-ray diffraction(XRD)and electronic scanning microscopy(SEM)examinations and liquid nitrogen(N2)adsorption/desorption and CH4 isothermal adsorption experiments for several exploration wells in northwestern Hunan Province,China.The results show that one or two intervals with high-quality source rocks(TOC>2 wt%)were deposited in the deep-shelf facies.The source rocks,which were mainly composed of carbonaceous shales and siliceous shales,had high quartz contents(>40 wt%)and low clay mineral(<30 wt%,mainly illites)and carbonate mineral(<20 wt%)contents.The SEM observations and liquid nitrogen(N2)adsorption/desorption experiments showed that the shale is tight,and nanoscale pores and microscale fractures are well developed.BJH volume(VBJH)of shale ranged from 2.144×10^-3 to 20.07×10^-3 cm^3/g,with an average of 11.752×10^-3 cm3/g.Pores mainly consisted of opened and interconnected mesopores(2–50 nm in diameter)or macropores(>50 nm in diameter).The shale reservoir has strong adsorption capacity for CH4.The Langmuir volume(VL)varied from 1.63 to 7.39 cm^3/g,with an average of 3.95 cm^3/g.The characteristics of shale reservoir are controlled by several factors:(1)A deep muddy continental shelf is the most favorable environment for the development of shale reservoirs,which is controlled by the development of basic materials.(2)The storage capacity of the shale reservoir is positively related to the TOC contents and plastic minerals and negatively related to cement minerals.(3)High maturity or overmaturity leads to the growth of organic pores and microfractures,thereby improving the reservoir storage capacity.It can be deduced that the high percentage of residual gas in Niutitang Fm results from the strong reservoir storage capacity of adsorbed gas.Two layers of sweet spots with strong storage capacity of free gas,and they are characterized by the relatively high TOC contents ranging from 4 wt%to 8 wt%.

Changing characteristics of ultralow permeability reservoirs during waterflooding operations

The characteristics of ultralow permeability reservoirs changed after waterflooding. Thin- section analysis and scanning electron microscopy （SEM） of core samples from inspection wells indicated that calcite and barite were formed in ultralow permeability reservoirs during waterflooding operations. Some asphaltene precipitates on the surface of formation rock would influence the reservoir porosity, permeability, wettability, and electrical properties. In this paper, the changes of physical, electrical, and fluid properties of ultralow permeability reservoirs during waterflooding operations were analyzed. This provides important information to improve waterflooding performance in ultralow permeability reservoirs.

The Major Controlling Factors and Different Oolitic Shoal Reservoir Characteristics of the Triassic Feixianguan Formation,Eastern Longgang Area,NE Sichuan Basin,SW China

Based on comprehensive analyses of occurrence,petrological observation,pore structure and geochemistry,the different reservoir characteristics and reservoir evolutionary pathways between different oolitic shoal reservoir types of the Feixianguan Formation on the west side of the Kaijiang-Liangping Trough have been studied.There exist three stages of high-energy slope break belts in the Feixianguan period,the corresponding three stages of oolitic shoals gradually migrating in the direction of the trough.Three types of oolitic shoal reservoirs,namely,residual-oolitic dolomite,mold-oolitic dolomite and sparry oolitic limestone,were formed during sedimentary-diagenetic evolution,the pore types being intergranular dissolved pore,mold pore(or intragranular dissolved pore)and residual intergranular pore,respectively.The petrology,physical properties and pore structure of the different types of oolitic shoal reservoirs are quite different.Residual-oolitic dolomite reservoirs have the best quality,while sparry oolitic limestone reservoirs have the poorest.Combined with analyses of trace elements,rare earth elements and carbon-oxygen isotopes,it is suggested that the formation of residual-oolitic dolomite reservoirs is jointly controlled by penesaline seawater seepage-reflux dolomitization and hydrothermal dolomitization.Mold-pore oolitic dolomite reservoirs are controlled by penesaline seawater seepage-reflux dolomitization and meteoric water solution.The burial dissolution of organic acid not only further improves the reservoir qualities of previously formed oolitic dolomite reservoirs,but also preserves residual intergranular pores in the sparry oolitic limestone reservoirs.

Characteristics and Controlling Factors of Shale Oil Reservoir Spaces in the Bohai Bay Basin

The Cenozoic continental strata of the Bohai Bay Basin are rich in shale oil resources, and they contain various types of reservoir spaces that are controlled by complex factors. Using field emission scanning electron microscopy(FESEM), automatic mineral identification and characterization system(AMICS), CO2 and N2 gas adsorption, and focused ion beam scanning electron microscopy(FIB-SEM), the types of shale reservoir spaces in the Bohai Bay Basin are summarized, the spatial distribution and connectivity of the various types of pores are described in detail, the microscopic pore structures are characterized, and the key geological mechanisms affecting the formation and evolution of the reservoir spaces are determined. Three conclusions can be drawn in the present study. First, the shale reservoir spaces in the Bohai Bay Basin can be divided into three broad categories, including mineral matrix pores, organic matter pores, and micro fractures. Those spaces can be subdivided into seven categories and fourteen sub-categories based on the distribution and formation mechanisms of the pores. Second, the complex pore-throat structures of the shale reservoir can be divided into two types based on the shape of the adsorption hysteresis loop. The pore structures mainly include wedge-shaped, flat slit-shaped, and ink bottle-shaped pores. The mesopores and micropores are the main contributors to pore volume and specific surface area, respectively. The macropores provide a portion of the pore volume, but they do not significantly contribute to the specific surface area. Third, the factors controlling the development of microscopic pores in the shale are complex. The sedimentary environment determines the composition and structure of the shale and provides the material basis for pore development. Diagenesis controls the types and characteristics of the pores. In addition, the thermal evolution of the organic matter is closely related to inorganic diagenesis and drives the formation and evolution of the pores.