Improvement of Metal-Graphene Ohmic Contact Resistance in Bilayer Epitaxial Graphene Devices

We report on an improved metal-graphene ohmic contact in bilayer epitaxial graphene on a SiC substrate with contact resistance below 0.1 Ω.mm. Monolayer and bilayer epitaxial graphenes are prepared on a 4HoSiC substrate in this work. Their contact resistances are measured by a transfer length method. An improved photoresist-free device fabrication method is used and is compared with the conventional device fabrication method. Compared with the monolayer graphene, the contact resistance Rc of bilayer graphene improves from an average of 0.24Ω·mm to 0. 1 Ωmm. Ohmic contact formation mechanism analysis by Landauer＇s approach reveals that the obtained low ohmic contact resistance in bilayer epitaxial graphene is due to their high carrier density high carrier transmission probability, and p-type doping introduced by contact metal Au.

Pyramiding of Pi46 and Pita to improve blast resistance and to evaluate the resistance effect of the two R genes

Utilization of R（resistance） genes to develop resistant cultivars is an effective strategy to combat against rice blast disease. In this study, R genes Pi46 and Pita in a resistant accession H4 were introgressed into an elite restorer line Hang-Hui-179（HH179） using the marker-assisted backcross breeding（MABB） procedure. As a result, three improved lines（e.g., R1791 carrying Pi46 alone, R1792 carrying Pita alone and R1793 carrying both Pi46 and Pita） were developed. The three improved lines had significant genetic similarities with the recurrent parent HH179. Thus, they and HH179 could be recognized as near isogenic lines（NILs）. The resistance spectrum of the three improved lines, which was tested at seedling stage, reached 91.1, 64.7 and 97.1%, respectively. This was markedly broader than that of HH179（23.5%）. Interestingly, R1793 showed resistance to panicle blast but neither R1791 nor R1792 exhibited resistance at two natural blast nurseries. The results implied that the stacking of Pi46 and Pita resulted in enhanced resistance, which was unachievable by either R gene alone. Further comparison indicated that the three improved lines were similar to HH179 in multiple agronomic traits; including plant height, tillers per plant, panicle length, spikelet fertility, and 1 000-grain weight. Thus, the three improved lines with different R genes can be used as new sources of resistance for developing variety. There is a complementary effect between the two R genes Pi46 and Pita.

Effect of Chromium Micro-alloying on the Corrosion Behavior of a Low-carbon Steel Rebar in Simulated Concrete Pore Solutions

A new low-cost corrosion-resistant rebar（HRB400 R） was designed and fabricated by chromium micro-alloying. The effects of Cr on the passivation and corrosion behavior of this rebar in the simulated concrete pore solutions were studied systematically, and its improved corrosion resistance was revealed. In the Cl--free saturated Ca（OH）_2 solution, the HRB400 R rebar presented nearly the same passive film and similar passivation ability compared to the common carbon steel rebar. In the long-term immersion corrosion test in the Cl--contained Ca（OH）_2 solution, the HRB400 R rebar presented improved corrosion resistance and obvious longer passivation-maintaining period. Micro-alloying of Cr element in the rebar matrix enhanced its corrosion resistance against Cl--attack and retarded the corrosion initiation in the matrix. In the alkaline Na Cl salt spraying test, the HRB400 R rebar also presented obviously lower mass-loss rate. The enrichment of Cr element in the rust layer improved its retardant effect to the penetration of aggressive medium, and decreased the corrosion propagation rate of the rebar.

Effects of Doping Trace Sm^(3+) and Gd^(3+) on Luminescent Character of Y_2O_2S∶Eu^(3+)

After trace Sm^3＋ ions and Gd^3＋ ions doping, the emission intensity of red phosphors Y2O2S： Eu^3 ＋ was enhanced and the voltage character （relation between emission intensity and excitation voltage） was improved while the other properties of physics and chemistry were not changed. The origins of enhancement and improvement are discussed. Probably the distortion and the defect of crystals are decreased by the substitution of Gd^3＋ for Y^3＋ instead of Eu^3＋ for Y^3＋ , and thus the Eu^3＋ crystal field is improved, and radiationless process and energy loss resulted from crystal defect are weakened, which leads to increased luminescence intensity and voltage character improvement. The overlapping fluorescent spectra of Y2O2S： Sm^3＋ emission and Y2O2S：Eu^3＋ excitation as well as Eu^3 ＋ excitation spectra transitions spectra lead to energy transfer from Sm^3 ＋ sensitization of Sm^3＋ ions fectively. containing Sm^3＋ excitation the possibility of resonance ions to Eu^3＋ ions, and the to Eu^3＋ ions is achieved effectively.

A new method to identify and improve the purity of hybrid rice with herbicide resistant gene

There is a close relationship between the hy—brid rice production and seed purity.Two-linehybrid rice with higher heterosis is producedthrough the hybridization between a photo-thermo sensitive genetic male sterile(GMS) rice line and a paternal variety.But the fertili-

Postprocessing treatments to improve the laser damage resistance of fused silica optical surfaces and SiO_2 coatings

The combination of deep wet etching and a magneto-rheological finishing （MRF） process is investigated to simultaneously improve laser damage resistance of a fused-silica surface at 355 nm. The subsequently deposited SiO2 coatings are researched to clarify the impact of substrate finishing technology on the coatings. It is revealed that a deep removal proceeding from the single side or double side had a significant impact on the laser-induced damage threshold （LIDT） of the fused silica, especially for the rear surface. After the deep etching, the MRF process that followed does not actually increase the LIDT, but it does ameliorate the surface qualities without additional LIDT degradation. The combination guarantee both the integrity of the surface＇s finish and the laser damage resistance of the fused silica and subsequent SiO2 coatings.

Renal sympathetic denervation reduces left ventricular hypertrophy and improves cardiac function in patients with resistant hypertension

This study investigated the effect of catheter-based renal sympathetic denervation （RD） on left ventricular hypertrophy （LVH） and systolic and diastolic function in patients with resistant hypertension. LVH and diastolic dysfunction are associated with elevated sympathetic activity and increased morbidity and mortality. The effect of RD on LVH and LV function is unclear