Resistive switching behavior and mechanism of HfO_(x) films with large on/off ratio by structure design

Different bilayer structures of HfO_(x)/Ti(TiO_(x)) are designed for hafnium-based memory to investigate the switching characteristics. The chemical states in the films and near the interface are characterized by x-ray photoelectron spectroscopy,and the oxygen vacancies are analyzed. Highly improved on/off ratio(~104) and much uniform switching parameters are observed for bilayer structures compared to single layer HfO_(x) sample, which can be attributed to the modulation of oxygen vacancies at the interface and better control of the growth of filaments. Furthermore, the reliability of the prepared samples is investigated. The carrier conduction behaviors of HfO_(x)-based samples can be attributed to the trapping and de-trapping process of oxygen vacancies and a filamentary model is proposed. In addition, the rupture of filaments during the reset process for the bilayer structures occur at the weak points near the interface by the recovery of oxygen vacancies accompanied by the variation of barrier height. The re-formation of fixed filaments due to the residual filaments as lightning rods results in the better switching performance of the bilayer structure.

Resistive switching properties of SnO_(2)nanowires fabricated by chemical vapor deposition

Resistive switching(RS)devices have great application prospects in the emerging memory field and neuromorphic field,but their stability and unclear RS mechanism limit their relevant applications.In this work,we construct a hydrogenated Au/SnO_(2)nanowire(NW)/Au device with two back-to-back Schottky diodes and investigate the RS characteristics in air and vacuum.We find that the Ion/Io ff ratio increases from 20 to 10^(4)when the read voltage decreases from 3.1 V to^(-1)V under the condition of electric field.Moreover,the rectification ratio can reach as high as 10^4owing to oxygen ion migration modulated by the electric field.The nanodevice also shows non-volatile resistive memory characteristic.The RS mechanism is clarified based on the changes of the Schottky barrier width and height at the interface of Au/SnO_(2)NW/Au device.Our results provide a strategy for designing high-performance memristive devices based on SnO_(2)NWs.

Electric-field control of perpendicular magnetic anisotropy by resistive switching via electrochemical metallization

Electric-field control of perpendicular magnetic anisotropy(PMA) is a feasible way to manipulate perpendicular magnetization,which is of great importance for realizing energy-efficient spintronics.Here,we propose a novel approach to accomplish this task at room temperature by resistive switching(RS) via electrochemical metallization(ECM) in a device with the stack of Si/SiO_(2)/Ta/Pt/Ag/Mn-doped ZnO(MZO)/Pt/Co/Pt/ITO.By applying certain voltages,the device could be set at high-resistance-state(HRS) and low-resistance-state(LRS),accompanied with a larger and a smaller coercivity(H_(C)),respectively,which demonstrates a nonvolatile E-field control of PMA.Based on our previous studies and the present control experiments,the electric modulation of PMA can be briefly explained as follows.At LRS,the Ag conductive filaments form and pass through the entire MZO layer and finally reach the Pt/Co/Pt sandwich,leading to weakening of PMA and reduction of H_(C).In contrast,at HRS,most of the Ag filaments dissolve and leave away from the Pt/Co/Pt sandwich,causing partial recovery of PMA and an increase of H_(C).This work provides a new clue to designing low-power spintronic devices based on PMA films.

Flexible and degradable resistive switching memory fabricated with sodium alginate

Transient electronics has attracted interest as an emerging technology to solve electronic-waste problem,due to its physically vanishing ability in solution.Here in this work,we demonstrate a flexible and degradable transient resistive switching(RS) memory device with simple structure of Cu/sodium alginate(SA)/ITO.The device presents excellent RS characteristics as well as high flexibility,including low operating voltage(<1.5 V) and multilevel RS behavior.No performance degradation occurs after bending the device 50 times.Moreover,our device can be absolutely dissolved in deionized water.The proposed SA-based transient memory device has great potential for the development of green and security memory devices.

Influence of Poly（methyl metacrylate） Addition on Resistive Switching Performance of P3HT/P（VDF-TrFE） Blend Films

Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usually deposited from solution, during which phase separation oc- curred, resulting in discrete semiconducting phase whose electrical property was modulated by surrounding ferroelectric phase. However, phase separation resulted in rough surface and thus large leakage current. To further improve electrical properties of such blend films, poly（methyl metacrylate） （PMMA） was introduced as additive into P3HT/P（VDF-TrFE） semiconducting/ferroelectric blend films in this work. It indicated that small amount of PMMA addition could effectively enhance the electrical stability to both large electrical stress and electrical fatigue and further improve retention performance. Overmuch PMMA addition tended to result in the loss of resistive switching property. A model on the configuration of three components was also put forward to well understand our experimental observations.

Resistive Switching Memory of TiO2 Nanowire Networks Grown on Ti Foil by a Single Hydrothermal Method

The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.

Modeling of conducting bridge evolution in bipolar vanadium oxide-based resistive switching memory

We investigate the resistive switching characteristics of a Cu/VOx/W structure. The VOx film is deposited by radio- frequency magnetron sputtering on the Cu electrode as a dielectric layer. The prepared VOx sample structure shows reproducible bipolar resistive switching characteristics with ultra-low switching voltage and good cycling endurance. A modified physical model is proposed to elucidate the typical switching behavior of the vanadium oxide-based resistive switching memory with a sudden resistance transition, and the self-saturation of reset current as a function of compliance current is observed in the test, which is attributed to the conducting mechanism is discussed in detail. growth pattern of the conducting filaments. Additionally, the related

Observation of Resistive Switching Memory by Reducing Device Size in a New Cr/CrO_x/TiO_x/TiN Structure

The resistive switching memory characteristics of 100 randomly measured devices were observed by reducing device size in a Cr/Cr Ox/Ti Ox/Ti N structure for the first time.Transmission electron microscope image confirmed a viahole size of 0.4 lm.A 3-nm-thick amorphous Ti Oxwith 4-nm-thick polycrystalline Cr Oxlayer was observed.A small 0.4-lm device shows reversible resistive switching at a current compliance of 300 l A as compared to other larger size devices(1–8 lm)owing to reduction of leakage current through the Ti Oxlayer.Good device-to-device uniformity with a yield of[85%has been clarified by weibull distribution owing to higher slope/shape factor.The switching mechanism is based on oxygen vacancy migration from the Cr Oxlayer and filament formation/rupture in the Ti Oxlayer.Long read pulse endurance of[105cycles,good data retention of 6 h,and a program/erase speed of 1 ls pulse width have been obtained.

Coexistence of unipolar and bipolar modes in Ag/ZnO/Pt resistive switching memory with oxygen-vacancy and metal-Ag filaments

In this study, the unipolar resistive switching （URS） and bipolar resistive switching （BRS） are demonstrated to be coexistent in the Ag/ZnO/Pt memory device, and both modes are observed to strongly depend on the polarity of forming voltage. The mechanisms of the URS and BRS behaviors could be attributed to the electric-field-induced migration of oxygen vacancies （Vo） and metal-Ag conducting filaments （CFs） respectively, which are confirmed by investigating the temperature dependences of low resistance states in both modes. Furthermore, we compare the resistive switching （RS） characteristics （e.g., forming and switching voltages, reset current and resistance states） between these two modes based on Vo- and Ag-CFs. The BRS mode shows better switching uniformity and lower power than the URS mode. Both of these modes exhibit good RS performances, including good retention, reliable cycling and high-speed switching. The result indicates that the coexistence of URS and BRS behaviors in a single device has great potential applications in future nonvolatile multi-level memory.

Nonvolatile Resistive Switching and Physical Mechanism in LaCrO3 Thin Films

Polycrystalline LaCrO3（LCO） thin films are deposited on Pt/Ti/SiO2/Si substrates by pulsed laser deposition and used as the switching material to construct resistive random access memory devices. The unipolar resistive switching（RS） behavior in the Au/LCO/Pt devices exhibits a high resistance ratio of ~104 between the high resistance state（HRS） and low resistance state（LRS） and exhibits excellent endurance/retention characteristics.The conduction mechanism of the HRS in the high voltage range is dominated by the Schottky emission, while the Ohmic conduction dictates the LRS and the low voltage range of HRS. The RS behavior in the Au/LCO/Pt devices can be understood by the formation and rupture of conducting filaments consisting of oxygen vacancies,which is validated by the temperature dependence of resistance and x-ray photoelectron spectroscopy results.Further analysis shows that the reset current IR and reset power PR in the reset processes exhibit a scaling law with the resistance in LRS（R0）, which indicates that the Joule heating effect plays an essential role in the RS behavior of the Au/LCO/Pt devices.

A Cu/ZnO Nanowire/Cu Resistive Switching Device

A new device has been realized using flip-chip joining two printed circuit boards(PCBs) on which zinc oxide(ZnO) nanowires were synthesized. Energy dispersive X-ray measurement has been conducted for the ZnO nanowires, confirming that Cu elements have been diffused into the nanowires during the chemical growth process. From I-V measurements, this Cu/ZnO nanowire/Cu structure exhibits a resistive tuning behaviour, which varies greatly with the frequency of the applied sinusoidal source.

Investigation of resistive switching behaviours in WO_3-based RRAM devices

In this paper, a WO3-based resistive random access memory device composed of a thin film of WO3 sandwiched between a copper top and a platinum bottom electrodes is fabricated by electron beam evaporation at room temperature. The reproducible resistive switching, low power consumption, multilevel storage possibility, and good data retention characteristics demonstrate that the Cu/WO3/Pt memory device is very promising for future nonvolatile memory applications. The formation and rupture of localised conductive filaments is suggested to be responsible for the observed resistive switching behaviours.

Electro-optical dual modulation on resistive switching behavior in BaTiO3/BiFeO3/TiO2 heterojunction

The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.

Bipolar Resistive Switching Effect in BiFeO_3/Nb:SrTiO_3 Heterostructure by RF Sputtering at Room Temperature

The(001) oriented BiFeO_3 thin film was deposited on the Nb: SrTiO_3 substrate by radio frequency magnetron sputtering technology, and the bipolar resistive switching effect was observed in the BiFeO_3/Nb: SrTiO_3 heterostructure. The results showed that the ratio between the high resistance and low resistance was more than two orders at a reading pulse of-0.5 V and it exhibited excellent retention over 3600 s. The current density-voltage characteristic was dominated by the space-charge-limited conduction. The resistive switching effect of the structure was attributed to the trapping/detrapping of the charge carriers.

Analysis of the resistive switching behaviors of vanadium oxide thin film

We demonstrate the polarization of resistive switching for a Cu/VOx/Cu memory cell.The switching behaviors of Cu/VOx/Cu cell are tested by using a semiconductor device analyzer（Agilent B1500A）,and the relative micro-analysis of I-V characteristics of VOx/Cu is characterized by using a conductive atomic force microscope（CAFM）.The I-V test results indicate that both the forming and the reversible resistive switching between low resistance state（LRS） and high resistance state（HRS） can be observed under either positive or negative sweep.The CAFM images for LRS and HRS directly exhibit evidence for the formation and rupture of filaments based on positive or negative voltage.The Cu/VOx/Cu sandwiched structure exhibits reversible resistive switching behavior and shows potential applications in the next generation of nonvolatile memory.

Hydrothermal Preparation and White-Light-Controlled Resistive Switching Behavior of BaWO_4 Nanospheres

In this work, BaWO4 nanospheres were successfully prepared by hydrothermal process. The bipolar resistive switching behavior of Ag/BaWO4/FTO device is observed. Moreover, this resistive switching behavior can be modulated by white light. The device can maintain superior stability in the dark and under white-light illumination. This study is useful for developing the light-controlled nonvolatile memory devices.

Resistive Switching Behavior of Ag/Mg0.2Zn0.8O/ZnMn2O4/p^+-Si Heterostructure Devices for Nonvolatile Memory Applications

The Ag/Mg0.2Zn0.8O/ZnMn2O4/p^＋-Si heterostructure devices were fabricated by sol-gel spin coating technique and the resistive switching behavior,conduction mechanism,endurance characteristic,and retention properties were investigated.A distinct bipolar resistive switching behavior of the devices was observed at room temperature.The resistance ratio R_（HRS）/RLRS of high resistance state and low resistance state is as large as four orders of magnitude with a readout voltage of 2.0 V.The dominant conduction mechanism of the device is trap-controlled space charge limited current（SCLC）.The devices exhibit good durability under 1×10^3cycles and the degradation is invisible for more than 10^6 s.

Resistive switching characteristics of Ti/ZrO_2/Pt RRAM device

In this paper, the bipolar resistive switching characteristic is reported in Ti/ZrO2/Pt resistive switching memory de- vices. The dominant mechanism of resistive switching is the formation and rupture of the conductive filament composed of oxygen vacancies. The conduction mechanisms for low and high resistance states are dominated by the ohmic conduc- tion and the trap-controlled space charge limited current （SCLC） mechanism, respectively. The effect of a set compliance current on the switching parameters is also studied： the low resistance and reset current are linearly dependent on the set compliance current in the log-log scale coordinate; and the set and reset voltage increase slightly with the increase of the set compliance current. A series circuit model is proposed to explain the effect of the set compliance current on the resistive switching behaviors.

Bipolar Resistive Switching in Epitaxial Mn_3O_4 Thin Films on Nb-Doped SrTiO_3 Substrates

Spinel （O01）-orientated Mn304 thin films on Nb-doped SrTi03 （001） substrates are fabricated via the pulsed laser deposition method. X-ray diffraction and high-resolution transmission electron microscopy indicate that the as-prepared epitaxial fihn is well crystaiHzed. In the film plane the orientation relationship between the film and the substrate is [lOOjMn3 04 ｜｜[110] Nb-doped SrTiO3. After an electroforming process, the film shows bipolar nonvolatile resistance switching behavior. The positive voltage bias drives the sample into a low resistance state, while the negative voltage switches it back to a high resistance state. The switching polarity is different from the previous studies. The complex impedance measurement suggests that the resistance switching behavior is of filament type. Due to the performance reproducibility and state stability, Mn3O4 might be a promising candidate for the resistive random access memory devices.

Optically-controlled resistive switching effects of CdS nanowire memtransistor

Since it was proposed,memtransistors have been a leading candidate with powerful capabilities in the field of neural morphological networks.A memtransistor is an emerging structure combining the concepts of a memristor and a field-effect transistor with low-dimensional materials,so that both optical excitation and electrical stimuli can be used to modulate the memristive characteristics,which make it a promising multi-terminal hybrid device for synaptic structures.In this paper,a single CdS nanowire memtransistor has been constructed by the micromechanical exfoliation and alignment lithography methods.It is found that the CdS memtransistor has good non-volatile bipolar memristive characteristics,and the corresponding switching ratio is as high as 10^(6) in the dark.While under illumination,the behavior of the CdS memtransistor is similar to that of a transistor or a memristor depending on the incident wavelengths,and the memristive switching ratio varies in the range of 10 to 10^(5) with the increase of the incident wavelength in the visible light range.In addition,the optical power is also found to affect the memristive characteristics of the device.All of these can be attributed to the modulation of the potential barrier by abundant surface states of nanowires and the illumination influences on the carrier concentrations in nanowires.