Effects of Film Thickness and Ar/O2 Ratio on Resistive Switching Characteristics of HfOx-Based Resistive-Switching Random Access Memories

Cu/HfOx/n^＋Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching （RS） characteristics of HfOx films, in terms of switch ratio, endurance properties, retention time and multilevel storage. It is revealed that the RS characteristics show strong dependence on technological parameters mainly by altering the defects （oxygen vacancies） in the film. The sample with thickness of 2Onto and Ar/O2 ratio of 12：3 exhibits the best RS behavior with the potential of multilevel storage. The conduction mechanism of all the films is interpreted based on the filamentary model.

Resistive switching properties of SnO_(2)nanowires fabricated by chemical vapor deposition

Resistive switching(RS)devices have great application prospects in the emerging memory field and neuromorphic field,but their stability and unclear RS mechanism limit their relevant applications.In this work,we construct a hydrogenated Au/SnO_(2)nanowire(NW)/Au device with two back-to-back Schottky diodes and investigate the RS characteristics in air and vacuum.We find that the Ion/Io ff ratio increases from 20 to 10^(4)when the read voltage decreases from 3.1 V to^(-1)V under the condition of electric field.Moreover,the rectification ratio can reach as high as 10^4owing to oxygen ion migration modulated by the electric field.The nanodevice also shows non-volatile resistive memory characteristic.The RS mechanism is clarified based on the changes of the Schottky barrier width and height at the interface of Au/SnO_(2)NW/Au device.Our results provide a strategy for designing high-performance memristive devices based on SnO_(2)NWs.

Electro-optical dual modulation on resistive switching behavior in BaTiO3/BiFeO3/TiO2 heterojunction

The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.

Resistive switching characteristic of electrolyte-oxide-semiconductor structures

The resistive switching characteristic of SiO2 thin film in electrolyte-oxide-semiconductor （EOS） struc- tures under certain bias voltage is reported. To analyze the mechanism of the resistive switching characteristic, a batch olEOS structures were fabricated under various conditions and their electrical properties were measured with a set of three-electrode systems. A theoretical model based on the formation and rupture of conductive filaments in the oxide layer is proposed to reveal the mechanism of the resistive switching characteristic, followed by an experimental investigation of Auger electron spectroscopy （AES） and secondary ion mass spectroscopy （SIMS） to verify the proposed theoretical model. It is found that different threshold voltage, reverse leakage current and slope value features of the switching I-V characteristic can be observed in different EOS structures with different elec- trolyte solutions as well as different SiO2 layers made by different fabrication processes or in different thicknesses. With a simple fabrication process and significant resistive switching characteristic, the EOS structures show great potential for chemical/biochemical applications.