The Mechanism of Eliminating Harmonic Resonance with Controllers and Application to the Power Systems

The phenomenon of anti-symmetrical bifurcation of periodic solutionsoccurring near an integral manifold is the intrinsic cause resulting in harmonic resonanceover-voltage in power systems. Due to this discovery, the principle of eliminating resonance byusing anti-bifurcation technique is presented, which makes that the theoretical bases of verymeasure to eliminate resonance are unified firstly from a point of view of basic theory. Ourdiscussion models depend on a class of nonlinear control model. Using the direct Lyapunov method, acomplete theoretical proof is given in accordance with the measure of eliminating resonance byconnecting nonlinear resistor in series to the neutral point of P. T., and the feedback control lawbeing applied. It comprises the action of parameters of resistor to eliminate resonance and theactual process of eliminating resonance, i.e., to go against bifurcation process which forces thebig harmonic solutions to retreat to the integral manifold gradually and disappear eventually, whichby using the nonlinear controllers. This makes it sure that the intrinsic cause of resonance iseliminated thoroughly. The obtained theory results and computing results are better than thepresented results.

Adaptive Control of Helicopter Ground Resonance with Magnetorheological Damper

The methodology for adaptive control of helicopter ground resonance with magnetorheological （MR） damper is presented. The adaptive inverse control method is used to control the output damping force of MR damper and the range of the damping force is given. Through the adaptive inverse control, the damping force of MR damper is fit to a desired damping force. With the background of applying MR damper to control of helicopter ground resonance, a model of loss force and an adaptive arithmetic for stabilization of the coupled rotor/fuselage system are presented. The simulation shows that the controller presented in this paper can stabilize the rotor/fuselage coupling system quickly and control the helicopter ground resonance effectively.

Optimal Delayed Control of Nonlinear Vibration Resonances of Single Degree of Freedom System

The primary resonance of a single-degree-of-freedom(SDOF)system subjected to a harmonic excitation is mitigated by the method of optimal time-delay feedback control.The stable regions of the time delays and feedback gains are obtained from the stable conditions of eigenvalue equation.Attenuation ratio is applied for evaluating the performance of the vibration control by taking aproportion of peak amplitude of primary resonance for the suspension system with or without controllers.Taking the attenuation ratio as the objective function and the stable regions of the time delays and feedback gains as constrains,the optimal feedback gains are determined by using minimum optimal method.Finally,simulation examples are also presented.

Bifurcation control of nonlinear oscillator in primary and secondary resonance

A weakly nonlinear oscillator was modeled by a sort of differential equation, a saddle-node bifurcation was found in case of primary and secondary resonance. To control the jumping phenomena and the unstable region of the nonlinear oscillator, feedback controllers were designed. Bifurcation control equations were obtained by using the multiple scales method. And through the numerical analysis, good controller could be obtained by changing the feedback control gain. Then a feasible way of further research of saddle-node bifurcation was provided. Finally, an example shows that the feedback control method applied to the hanging bridge system of gas turbine is doable.

Wave propagation control in periodic track structure through local resonance mechanism

Excessive vibration and noise radiation of the track structure can be caused by the operation of high speed trains.Though the track structure is characterized by obvious periodic properties and band gaps,the bandwidth is narrow and the elastic wave attenuation capability within the band gap is weak.In order to effectively control the vibration and noise of track structure,the local resonance mechanism is introduced to broaden the band gap and realize wave propagation control.The locally resonant units are attached periodically on the rail,forming a new locally resonant phononic crystal structure.Then the tuning of the elastic wave band gaps of track structure is discussed,and the formation mechanism of the band gap is explicated.The research results show that a new wide and adjustable locally resonant band gap is formed after the resonant units are introduced.The phenomenon of coupling and transition can be observed between the new locally resonant band gap and the original band gap of the periodic track structure with the band gap width reaching the maximum at the coupling position.The broader band gap can be applied for vibration and noise reduction in high speed railway track structure.

New botanical drug, HL tablet, reduces hepatic fat as measured by magnetic resonance spectroscopy in patients with nonalcoholic fatty liver disease: A placebo-controlled, randomized, phase Ⅱ trial

AIM To evaluate the efficacy and safety of HL tablet extracted from magnolia officinalis for treating patients with nonalcoholic fatty liver disease(NAFLD).METHODS Seventy-four patients with NAFLD diagnosed by ultrasonography were randomly assigned to 3 groups given high dose(400 mg) HL tablet, low dose(133.4 mg) HL tablet and placebo, respectively, daily for 12 wk. The primary endpoint was post-treatment change of hepatic fat content(HFC) measured by magnetic resonance spectroscopy. Secondary endpoints included changes of serum aspartate aminotransferase, alanine aminotransferase(ALT), cholesterol, triglyceride, free fatty acid, homeostasis model assessment-estimated insulin resistance, and body mass index(BMI).RESULTS The mean HFC of the high dose HL group, but not of the low dose group, declined significantly after 12 wk of treatment(high dose vs placebo, P = 0.033; low dose vs placebo, P = 0.386). The mean changes of HFC from baseline at week 12 were-1.7% ± 3.1% in the high dose group(P = 0.018),-1.21% ± 4.97% in the low dose group(P = 0.254) and 0.61% ± 3.87% in the placebo group(relative changes compared to baseline, high dose were:-12.1% ± 23.5%, low dose:-3.2% ± 32.0%, and placebo: 7.6% ± 44.0%). Serum ALT levels also tended to decrease in the groups receiving HL tablet while other factors were unaffected. There were no moderate or severe treatment-related safety issues during the study.CONCLUSION HL tablet is effective in reducing HFC without any negative lipid profiles, BMI changes and adverse effects.

Control of stochastic resonance in bistable systems by using periodic signals

According to the characteristic structure of double wells in bistable systems, this paper analyses stochastic fluctuations in the single potential well and probability transitions between the two potential wells and proposes a method of controlling stochastic resonance by using a periodic signal. Results of theoretical analysis and numerical simulation show that the phenomenon of stochastic resonance happens when the time scales of the periodic signal and the noise-induced probability transitions between the two potential wells achieve stochastic synchronization. By adding a bistable system with a controllable periodic signal, fluctuations in the single potential well can be effectively controlled, thus affecting the probability transitions between the two potential wells. In this way, an effective control can be achieved which allows one to either enhance or realize stochastic resonance.

A review of nuclear magnetic resonance(NMR) technology applied in the characterization of polymer gels for petroleum reservoir conformance control

Polymer gel systems have been widely applied to control excessive water and improve oil recovery(IOR)in petroleum reservoirs.They are usually divided into two main types,in-situ cross-linked polymer gels,and pre-formed polymer gels.In recent years,nuclear magnetic resonance(NMR) technology has been gradually applied to the research of polymer gel systems due to its unique analysis advantages.This paper is intent to review these works systematically.For in-situ cross-linked polymer gel systems,NMR can be used to characterize the chemical structure changes of the polymer,the cross-linker,and the auxiliary agent in the formulation of the polymer gel systems.Moreover,the gelation time and the gel strength of the in-situ cross-linked polymer gel systems can also be measured by NMR.For pre-formed polymer gels,NMR can be employed to detect the chemical structure of the designed products.Last,the NMR method can evaluate the plugging,water control,and oil improvement performance of the polymer gels in porous media without using dopants.This review can help readers build a more systematic understanding of the application of NMR technology in polymer gel systems for IOR and help re searchers to more deeply study the performance of polymer gel systems.

Oil Production Optimization by Means of a Combined“Plugging,Profile Control,and Flooding”Treatment:Analysis of Results Obtained Using Computer Tomography and Nuclear Magnetic Resonance

Due to long-term water injection,often oilfields enter the so-called medium and high water cut stage,and it is difficult to achieve good oil recovery and water reduction through standard methods(single profile control and flooding measures).Therefore,in this study,a novel method based on“plugging,profile control,and flooding”being implemented at the same time is proposed.To assess the performances of this approach,physical simulations,computer tomography,and nuclear magnetic resonance are used.The results show that the combination of a gel plugging agent,a polymer microsphere flooding agent,and a high-efficiency oil displacement agent leads to better results in terms of oil recovery with respect to the situation in which these approaches are used separately(the oil recovery is increased by 15.37%).Computer tomography scan results show that with the combined approach,a larger sweep volume and higher oil washing efficiency are obtained.The remaining oil in the cluster form can be recovered in the middle and low permeability layer,increasing the proportion of the columnar and blind end states of the oil.The nuclear magnetic resonance test results show that the combined“plugging,profile control,and flooding”treatment can also be used to control more effectively the dominant channels of the high permeability layer and further expand the recovery degree of the remaining oil in the pores of different sizes in the middle and low permeability layers.However,for the low permeability layer(permeability difference of 20),the benefits in terms of oil recovery are limited.

Voltage control of ferromagnetic resonance and spin waves

The voltage control of magnetism has attracted intensive attention owing to the abundant physical phenomena associated with magnetoelectric coupling. More importantly, the techniques to electrically manipulate spin dynamics, such as magnetic anisotropy and ferromagnetic resonance, are of great significance because of their potential applications in high-density memory devices, microwave signal processors, and magnetic sensors. Recently, voltage control of spin waves has also been demonstrated in several multiferroic heterostructures. This development provides new platforms for energyefficient, tunable magnonic devices. In this review, we focus on the most recent advances in voltage control of ferromagnetic resonance and spin waves in magnetoelectric materials and discuss the physical mechanisms and prospects for practical device applications.

Penetration control by weld pool resonance during gas tungsten arc welding

Presents penetration control by weld pool resonance which occurs when the natural frequency of weld pool is equal to the frequency of sine wave current while the weld pool is excited into oscillation by superimposing sine wave current with definite frequency or regular frequency on DC current, and experiments carried out on detecting resonance signals during both stationary and travelling arc welding with variant frequency pulse current, and concludes with experimental results that penetration control can be realized by weld pool resonance when welding speed is lower than 80mm/min, and this control method is applicable to welding thin (0.5～3.0 mm) plates of carbon steel, low alloy steel, high strength steel and superhigh strength steel, and suitable for alternating polarity welding of stainless steel, titanium alloy steel and aluminum alloy.

A low-noise X-band microwave source with digital automatic frequency control for electron paramagnetic resonance spectroscopy

We report a new design of microwave source for X-band electron paramagnetic resonance spectrometer.The microwave source is equipped with a digital automatic frequency control circuit.The parameters of the digital automatic frequency control circuit can be flexibly configured for different experimental conditions,such as the input powers or the quality factors of the resonator.The configurability makes the microwave source universally compatible and greatly extends its application.To demonstrate the ability of adapting to various experimental conditions,the microwave source is tested by varying the input powers and the quality factors of the resonator.A satisfactory phase noise as low as-135 d Bc/Hz at 100-k Hz offset from the center frequency is achieved,due to the use of a phase-locked dielectric resonator oscillator and a direct digital synthesizer.Continuous-wave electron paramagnetic resonance experiments are conducted to examine the performance of the microwave source.The outstanding performance shows a prospect of wide applications of the microwave source in numerous fields of science.

Angular control of multi-mode resonance frequencies in obliquely deposited CoZr thin films with rotatable stripe domains

We investigate the angular-dependent multi-mode resonance frequencies in CoZr magnetic thin films with a rotatable stripe domain structure.A variable range of multi-mode resonance frequencies from 1.86 GHz to 4.80 GHz is achieved by pre-magnetizing the CoZr films along different azimuth directions,which can be ascribed to the competition between the uniaxial anisotropy caused by the oblique deposition and the rotatable anisotropy induced by the rotatable stripe domain.Furthermore,the regulating range of resonance frequency for the CoZr film can be adjusted by changing the oblique deposition angle.Our results might be beneficial for the applications of magnetic thin films in microwave devices.

Novel Adaptive Neural Controller Design Based on HVDC Transmission System to Damp Low Frequency Oscillations and Sub Synchronous Resonance

This paper presents the effect of the high voltage direct current (HVDC) transmission system based on voltage source converter (VSC) on the sub synchronous resonance (SSR) and low frequency oscillations (LFO) in power system. Also, a novel adaptive neural controller based on neural identifier is proposed for the HVDC which is capable of damping out LFO and sub synchronous oscillations (SSO). For comparison purposes, results of system based damping neural controller are compared with a lead-lag controller based on quantum particle swarm optimization (QPSO). It is shown that implementing adaptive damping controller not only improves the stability of power system but also can overcome drawbacks of conventional compensators with fixed parameters. In order to determine the most effective input of HVDC system to apply supplementary controller signal, analysis based on singular value decomposition is performed. To evaluate the performance of the proposed controller, transient simulations of detailed nonlinear system are considered.

A Hybrid Structure of Dual Stators and a Pneumatic Spring for Resonance Control in an Air Mount

An active device using electromagnetic forces was constructed and examined for the purpose of minimizing the resonance in air mounts of clean rooms. The air mounts are vulnerable to low-frequency resonance due to heavy weight and low stiffness. A hybrid structure of the active device, composed of pneumatic and electromagnetic parts, was developed and tested. The pneumatic parts in the device support heavy weights under the air mounts, and the electromagnetic parts reduce the resonance. The electromagnetic parts are composed of dual stators and an armature, which surround the pneumatic parts. The resonance can decrease when electromagnetic forces are generated in the gaps between the stators and the armature. Four active devices were installed under a 3-ton surface plate for a vibration test apparatus. The vibration was detected by eddy-current sensors. Discrete P Control logic was based on displacement, and embedded in a C6713 DSP. The results from impact tests show that the peak magnitude in the resonance frequency can be reduced to –10 dB.

Voltage control magnetism and ferromagnetic resonance in an Fe_(19)Ni_(81)/PMN-PT heterostructure by strain

Voltage control magnetism has been widely studied due to its potential applications in the next generation of information technology.PMN-PT,as a single crystal ferroelectric substrate,has been widely used in the study of voltage control magnetism because of its excellent piezoelectric properties.However,most of the research based on PMN-PT only studies the influence of a single tensile(or compressive)stress on the magnetic properties due to the asymmetry of strain.In this work,we show the effect of different strains on the magnetic anisotropy of an Fe_(19)Ni_(81)/(011)PMN-PT heterojunction.More importantly,the(011)cut PMN-PT generates non-volatile strain,which provides an advantage when investigating the voltage manipulation of RF/microwave magnetic devices.As a result,a ferromagnetic resonance field tunability of 70 Oe is induced in our sample by the non-volatile strain.Our results provide new possibilities for novel voltage adjustable RF/microwave magnetic devices and spintronic devices.

Research on Noise Control for Ventilators with Resonance

A study was carried out to control the noise produced by the ventilators at the Luling coalmine, which had caused serious noise pollution to the residents living around the mine for a long time. The main noise source was found to be the dynamic noise at the outlet of the diffuser. The frequency of its peak value was 250 Hz. A special brick with a resonant frequency of 250 Hz was designed to eliminate this noise. The diffusion of a lower frequency noise has been successfully controlled by the installation of a noise-eliminating tower above the diffuser outlet. The detection results show that the noise in the nearby residential area has been lowered to an average 55.3dB(A) in the daytime from 69.8dB(A) and to 48.4dB(A) at night from 65.8dB(A).

Nuclear magnetic resonance for quantum computing： Techniques and recent achievements

Rapid developments in quantum information processing have been made, and remarkable achievements have been obtained in recent years, both in theory and experiments. Coherent control of nuclear spin dynamics is a powerful tool for the experimental implementation of quantum schemes in liquid and solid nuclear magnetic resonance （NMR） system, especially in liquid-state NMR. Compared with other quantum information processing systems, the NMR platform has the advantages such as the long coherence time, the precise manipulation, and well-developed quantum control techniques, which make it possible to accurately control a quantum system with up to 12-qubits. Extensive applications of liquid-state NMR spectroscopy in quantum information processing such as quantum communication, quantum computing, and quantum simulation have been thoroughly studied over half a century. This article introduces the general principles of NMR quantum information processing, and reviews the new-developed techniques. The review will also include the recent achievements of the experimental realization of quantum algorithms for machine learning, quantum simulations for high energy physics, and topological order in NMR. We also discuss the limitation and prospect of liquid-state NMR spectroscopy and the solid-state NMR systems as quantum computing in the article.

Three-dimensional reconstructed magnetic resonance scans:Accuracy in identifying and defining knee meniscal tears

AIM To determine whether three-dimensional(3D) reconstruction from conventional magnetic resonance imaging(MRI) is able to accurately detect a meniscal tear, and define the configuration.METHODS Thirty-three patients' 3T MRI scan data were collected and sagittal uni-planar 3D reconstructions performed from the preoperative MRI. There were 24 meniscal tears in 24 patients, and nine controls. All patients had arthroscopic corroboration of MRI findings. Two independent observers prospectively reported on all 33 reconstructions. Meniscal tear presence or absence was noted, and tear configuration subsequently categorised as either radial, bucket-handle, parrot beak, horizontal or complex.RESULTS Identification of control menisci or meniscal tear presence was excellent(Accuracy: observer 1 = 90.9%; observer 2 = 81.8%). Of the tear configurations, bucket handle tears were accurately identified(Accuracy observer 1 and 2 = 80%). The remaining tear configurations were notaccurately discernable.CONCLUSION Uni-planar 3D reconstruction from 3T MRI knee scan sequences are useful in identifying normal menisci and menisci with bucket-handle tears. Advances in MRI sequencing and reconstruction software are awaited for accurate identification of the remaining meniscal tear configurations.

Adaptive rotor current control for wind-turbine driven DFIG using resonant controllers in a rotor rotating reference frame

This paper proposes an adaptive rotor current controller for doubly-fed induction generator (DFIG), which consists of a proportional (P) controller and two harmonic resonant (R) controllers implemented in the rotor rotating reference frame. The two resonant controllers are tuned at slip frequencies ωslip+ and ωslip-, respectively. As a result, the positive- and negative-sequence components of the rotor current are fully regulated by the PR controller without involving the positive- and negative-sequence decomposition, which in effect improves the fault ride-through (FRT) capability of the DFIG-based wind power generation system during the period of large transient grid voltage unbalance. Correctness of the theoretical analysis and feasibility of the proposed unbalanced control scheme are validated by simulation on a 1.5-MW DFIG wind power generation system.