Enhancement of terahertz coupling efficiency by improved antenna design in GaN/AlGaN high electron mobility transistor detectors

An optimized micro-gated terahertz detector with novel triple resonant antenna is presented.The novel resonant antenna operates at room temperature and shows more than a 700% increase in photocurrent response compared to the conventional bowtie antenna.In finite-difference-time-domain simulations,we found the performance of the self-mixing GaN/AlGaN high electron mobility transistor detector is mainly dependent on the parameters L gs（the gap between the gate and the source/drain antenna） and L w（the gap between the source and drain antenna）.With the improved triple resonant antenna,an optimized micrometer-sized AlGaN/GaN high electron mobility transistor detector can achieve a high responsivity of 9.45×102 V/W at a frequency of 903 GHz at room temperature.

A Novel Kind of Wideband Low-Profile Dielectric Resonator Antenna Suitable for Beam-scanning Applications

In this paper, a low-profile wideband dielectric resonator antenna(DRA) with a very compact planar size is investigated. The antenna consists of a high permittivity dielectric sheet on the top, a low permittivity substrate in the middle, and a probe feeding structure at the bottom. By digging an annular slot in the designated area of the square dielectric sheet, the resonant frequency of fundamental TE111 mode can be effectively increased to be close to the high-order TE131 mode. The two modes can be finally merged together, yielding a wide impedance bandwidth of16.6%. Most importantly, the combination of the two modes is done on the premise of a fixed antenna planar size, which can be very compact and suitable for beam-scanning applications. A probe feeding structure is used to excite the DRA, making the antenna simple and practical to be integrated with other RF circuits. For verification, antenna prototypes with singlefeed linear polarization and differential-feed dual polarization were fabricated and measured. Reasonable agreement between the measured and simulated results is observed.

Ultra-Wideband Annular Ring Fed Rectangular Dielectric Resonator Antenna for Millimeter Wave 5G Applications

In this article an ultra-wideband rectangular Dielectric Resonator Antenna is designed for millimeter wave 5G frequency band applications.Indoor 5G communications require antenna system with wide bandwidth and high efficiency to enhance the throughput in the channel.To fulfill such requirements a Dielectric Resonator Antenna(DRA)is designed here which has achieved an ultra-wide bandwidth of 20.15%(22.32–27.56 GHz)which is 5.24 GHz of bandwidth centered at 26 GHz as resonating frequency.This covers the complete band 30(24.3–27.5 GHz)of 5G spectrum.26 and 28 GHz are considered as most popular frequencies in millimeter wave 5G communications.The aperture fed DRA designed here has also achieved an efficiency of 96 percentage with maximum radiation in the broadside direction(Phi=0,Theta=0).The measured gain of the DRA is 6.3 dB.The DRA designed here has dimensions of 0.25λ0×0.22λ0×0.12λ0.under the characteristic’s mode.The DRA is placed over a substrate with dimensions 0.5λ0×0.5λ0×0.02λ0.A cross slot aperture has been made on the ground plane which is placed above to the substrate.Here a full ground plane is used to resonate the antenna and is of similar dimension to the substrate.A microstrip line with two concentric rings makes an annular feed structure is used to excite the DRA and is placed below the substrate.The DRA is excited here in characteristics mode TE1Y1 and is the only mode of excitation.The DRA is linearly polarized,and the characteristic mode of excitation is maintained with 50 Ohm input impedance of the antenna.The DRA also gives here a good difference between the co-pol and cross pol approximately 15 to 20 dB.This antenna is more suitable for 5G indoor applications in millimeter wave frequency band centered at 26 GHz.

A Review of Wideband Circularly Polarized Dielectric Resonator Antennas

This article presents a technical review of circularly polarized(CP) dielectric resonator antennas(DRA) for wideband applications.The primary objective of this review is,to highlight the techniques used by different researchers for generating circular polarization in DRA.First,a general idea of circular polarization and it advantages over linear polarization is presented,and then all the major developments made in the CP DRA are highlighted.The emphasis of the paper is on the wideband circularly polarized dielectric resonator antenna.The current state of the art and all the realizable features of the CP DRA are addressed comprehensively.Finally,some recommendations for future CP DRAs are given and the paper ends with concluding remarks.

A novel receiver-transmitter metasurface for a high-aperture-efficiency Fabry-Perot resonator antenna

This paper presents a novel coupled receiver-transmitter metasurface(MS)which is used to realize a high-aperture-efficiency Fabry-Perot resonator antenna.The unit cell of the MS adopts a slot-coupling procedure to realize energy transmission from the receiver patch to the radiator patch.This approach makes it easier to independently control the transmission magnitude and phase.Based on this characteristic,the transmission coefficients of different unit cells on the MS can be optimized by a genetic algorithm.Then,nearly uniform electric amplitude and phase distribution across the aperture field of the antenna are achieved.Therefore,the gain and aperture efficiency of the antenna are improved.A prototype of the optimized antenna is fabricated and measured to validate the design.The measured gain of the fabricated antenna reaches 17.3 dBi with an aperture efficiency of 94.5%.A higher aperture efficiency is obtained with the proposed antenna which has a low profile and simple structure.

Gain Enhancement of Dielectric Resonator Antenna Using Electromagnetic Bandgap Structure

High gain antennas are highly desirable for long-range wireless communication systems.In this paper,a compact,low profile,and high gain dielectric resonator antenna is proposed,fabricated,experimentally tested,and verified.The proposed antenna system has a cylindrical dielectric resonator antenna with a height of 9 mm and a radius of 6.35 mm as a radiating element.The proposed dielectric resonator antenna is sourced with a slot while the slot is excited with a rectangular microstrip transmission line.The microstrip transmission line is designed for a 50impedance to provide maximum power to the slot.As a result,the proposed antenna operates at 5.15 GHz with a 10-dB absolute bandwidth of 430 MHz(4.98–5.41 GHz).It is important to mention that the gain of the dielectric resonator antenna is enhanced by the introduction of an electromagnetic bandgap(EBG)structure.In fact,EBG units are placed below the antenna,which enhances the realized peak gain from 5.32 dBi to 8.36 dBi at 5.15 GHz.More specifically,a gain enhancement of 3.04 dB is observed with the introduction of the EBG array.This antenna has several good features such as high gain,compact size,large bandwidth,and lower losses which make it a suitable choice for long-range wireless communication systems.

Compact Interlaced Dual Circularly Polarized Sequentially Rotated Dielectric-Resonator Antenna Array

In this study,a compact 2×2 interlaced sequentially rotated dual-polarized dielectric-resonator antenna array is proposed for 5.8 GHz applications.The array is composed of a novel unit elements that are made of rectangular dielectric resonator(RDR)coupled to an eye slot for generating the orthogonal modes,TEδx 21 and TE1yδ1 to acquire circular polarization(CP)radiation.For the purpose of miniaturization and achieving dual polarized resonance,the array is fed by two interlaced ports and each port excites two radiating elements.The first port feeds horizontal elements to obtain left hand circular polarization(LHCP).The second port feeds vertical elements to obtain right hand circular polarization(RHCP).A quarter-wave length transformer is employed to reduce the attenuation and consequently increase the array gain performance.The 35×35 mm2(0.676λ0×0.676λ0)gains were 8.4 and 8.2 dBi for port 1 and port 2,respectively,with port isolations of−33.51 dB.The design achieves a voltage standing-wave ratio(VSWR)<−10 dB and an axial ratio(AR)<−3 dB bandwidth of 2.48%(5.766 to 5.911 GHz)for LHCP at port 1 and a VSWR<−10 dB and AR<−3 dB bandwidth of 2.28%(5.788 to 5.922 GHz)for RHCP at port 2.The findings of the proposed design validate its use for ISM band applications.

Wideband Polarization Reconfigurable Dielectric Resonator Antenna

A wideband polarization reconfigurable dielectric resonator antenna excited by quasilumped quadrature coupler（ QLQC） is proposed. By adjusting the value of varactor diode on the QLQC feed network,both the wideband LP and CP dielectric resonator antennas（ DRA） modes can be achieved. By selecting a different feed port,left-and right-handed CP conversion can be realized.It is found that the 10 dB impedance bandwidth of the LP and CP modes are 10. 1% and 44. 9%,respectively.For the CP mode,a very wide 3 dB axial ratio bandwidth of 37. 7% can be obtained which is much larger than that of the microstrip patch counterpart（ 3. 8%）. It is worth mentioning that the wideband CP DRA has a stable broadside radiation pattern across the whole operating band where the boresight gain is larger than 3 dBi.

Triple-Band Circularly Polarized Dielectric Resonator Antenna (DRA) for Wireless Applications

This paper proposes a new dielectric resonator antenna(DRA)design that can generate circularly polarized(CP)triple-band signals.Atripleband CP DRA antenna fed by a probe feed system is achieved with metal strips structure on side of DRA structure.The design start with conventional rectangular DRA with F shaped metal strips on DRA structure alongside the feed.Then,the F metal strip is enhanced by extending the length of the metal strip to obtain wider impedance bandwidth.Further improvement on the antenna performance is observed by improvised the conventional DRA structure.The method of removing part of DRA bottom resulted to higher antenna gain with triple band CP.The primary features of the proposed DRA include wide impedance matching bandwidth(BW)and broadband circular polarization(CP).The primary features of the proposedDRAinclude wide impedance matching bandwidth(BW)and broadband circular polarization(CP).The CP BW values recorded by the proposed antenna were∼11.27%(3.3–3.65 GHz),12.18%(4.17–4.69 GHz),and 1.74%(6.44–6.55 GHz)for impedance-matching BW values of 35.4%(3.3–4.69 GHz),1.74%(5.36–5.44 GHz),and 1.85%(6.41–6.55 GHz)with peak gains of 6.8 dBic,7.6 dBic,and 8.5 dBic,respectively,in the lower,central,and upper bands.The prototype of the proposed antenna geometry was fabricated and measured.A good agreement was noted between the simulated and the measured results.

Novel circularly-polarized ceramic dielectric resonator antenna excited by a corner-cut square patch

A ceramic dielectric resonator antenna excited by a corner-cut square patch for the circularly-polarized operation is introduced. The effect of patch size and cut size is investigated, showing that the resonant frequency of the antenna can be changed by simply changing the patch size. The reflection, axial ratio, and radiation characteristics of the antenna are found. Measurements were carried out to verify the design. The antenna is compact in structure, which is attractive in the application as the satellite communication terminals.

Substrate Integrated Waveguide Based Monopulse Slot Antenna Arrays for 60 GHz Applications

Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.

Dielectric Resonator Magnetoelectric Dipole Arrays with Low Cross Polarization,Backward Radiation,and Mutual Coupling for MIMO Base Station Applications

Dielectric resonator magnetoelectric dipole(DRMED)arrays with enhanced isolation,reduced cross-polarization,and backward radiation are proposed for base station(BS)applications.The proposed antenna comprises an elevated dielectric resonator antenna(DRA)on a small metal plate above a sizeable common ground plane.The DRA is designed in its T Eδ11 mode,acting like a magnetic dipole.The surface current excited by the differential probes flowing on the small ground plane is equivalent to an electric dipole.Since these two equivalent dipoles are orthogonal,they have the magnetoelectric dipole characteristics with reduced backward radiation.Meanwhile,the small ground planes can be treated as decoupling structures to provide a neutralization path to cancel the original coupling path.A linearly-polarized 4-element prototype array was verified experimentally in previous work.Here,a dual-polarized DRMED antenna is presented to construct a 2-element and 4×4 array for BS applications.To investigate its MIMO performance,sophisticated multi-cell scenario simulations are carried out.By using the proposed dualpolarized DRMED array,the cellular system capacityis improved by 118.6%compared to a conventional DRA array.This significant MIMO system improvement is mainly due to the reduced backward radiation and,therefore,reduced inter-cell interferences.Measurements align well with the simulations.

3D electromagnetic simulation of the coupling characteristics and double-stub Ferrite tuners impedance matching for EAST ICRH four-strap antenna

A program developed with COMSOL software integrates EAST four-strap antenna coupling with the double-stub Ferrite tuners(FT)impedance matching,obtaining physical quantities crucial for predicting the overall performance of the ion cyclotron resonance heating(ICRH)antenna and matching system.These quantities encompass S-matrix,port complex impedance,reflection coefficients,electric field and voltage distribution,and optimal matching settings.In this study,we explore the relationship between S-matrix,reflection coefficients,port complex impedance,and frequency.Then,we analyze the impact of Faraday screens placement position and transparency,the distance from the Faraday screen(FS)to the current straps(CS),the relative distance between ports,and the characteristic impedance of the transmission line on the coupling characteristic impedance of the EAST ICRH system.Finally,we simulate the electric field distribution and voltage distribution of the EAST ICRH system for plasma heating with double-stub FT impedance matching.Using optimized parameters,the coupling power of the ICRH system can be approximately doubled.The results present herein may offer guidance for the design of high-power,long-pulse operation ICRH antenna systems.

Generalized Odd-Even Mode Theory and Mode Synthesis Antenna Design Approach

In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically reviewed.In this context,general-ized odd-even mode theory is advanced to quantitatively and approximately describe the mutual coupling effect between a feed line and an antenna.As is mathematically deduced and demonstrated,the modal parity mismatch between the feed line and the antenna should ultimately dominate the unbalance phenomenon in antenna systems.Thus,an elegant,closed-form formula is derived to ap-proximately calculate the“unbalance degree”of a straight dipole off-center fed by a symmetric twin-wire line.Design approaches for the simplest,linear,1-D multimode resonant antennas are introduced.Moreover,the“falling tone excitation”law gauged based on prototype dipoles is revealed and used to develop a mode synthesis design approach for microstrip patch antennas(MPAs)and 2-D sectorial electric dipole antennas.Design examples with distinctive radiation performance are presented and discussed.Finally,possible development trends of multimode resonant antennas are prospected.

Submillimeter wave communication versus millimeter wave communication

This paper studies the performance of a submillimeter wave antenna operating between frequencies 0.1 THz and 10 THz with a 4-cyano-4-pentylbiphenyl[5CB]substrate.Since the size and shape of the antenna impact its gain/directivity,resonant frequency,bandwidth,and efficiency,the two antenna types considered in this paper are:(a)Rectangular Patch Antenna(RPA),and(b)Cylindrical Dielectric Resonator Antenna(CDRA).Here a submillimeter wave antenna is compared with a millimeter wave(a few GHz to 100 GHz)antenna.These popular mmwave antennas are chosen for the submillimeter wave antenna in order to understand changes in their performance as the result of changes in their geometrical shape.FEldberechnung bei Korpern mit beliebiger Oberflache(FEKO)software is used for the design and calculation of the Three-Dimensional(3D)ElectroMagnetic(EM)patterns.This paper also concentrates on the design and analysis of a massive submillimeter wave Multiple-Input Multiple-Output(MIMO)(8 by 8)RPA and CDRA.

面向三频WiFi应用的分集玻璃天线

本文研究了两种新型极化和模式分集玻璃介质谐振器天线(DRAs),用于三频段(2.4 GHz、5.2 GHz和5.8 GHz)无线保真(WiFi)应用。研究比较了这两种DRAs以及一种新型空间分集玻璃DRA,以确定哪种分集天线最适合WiFi路由器应用。同时,将这三种分集玻璃DRAs与一个商业空间分集单极对进行比较,以评估玻璃DRA在WiFi路由器应用中的性能。在极化分集天线中,采用双端口馈电方案来激发不同的DRA模式,并通过使用阶梯形DRA来调节DRA模式的频率。对于模式分集设计,引入堆叠式DRA来扩展圆锥和正侧向辐射模的带宽。所有三种新型分集天线均得到了实验验证。在实验中,还测量了三种玻璃分集天线和参考空间分集单极子天线的误码率(BER),并对结果进行了比较和讨论。实验结果表明,在三种天线中,极化分集全向DRA具有最稳定的BER。

UltrahighQ Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)microwave dielectric ceramics for temperature-stable millimeter-wave dielectric resonator antennas

Microwave dielectric ceramics should be improved to advance mobile communication technologies further.In this study,we prepared Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)ceramics with nonstoichiometric Sr^(2+)ratios based on our previously reported SrY_(2)O_(4) microwave dielectric ceramic,which has a low dielectric constant and an ultrahigh quality factor(Q value).The ceramic exhibited a 33.6% higher Q-by-frequency(Q×f)value(Q≈12,500)at x=0.02 than SrY_(2)O_(4).All Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)ceramics exhibited pure phase structures,although variations in crystal-plane spacings were observed.The ceramics are mainly composed of Sr-O,Y1-O,and Y_(2)-O octahedra,with the temperature coefficient of the resonant frequency(τ_(f))of the ceramic increasing with Y_(2)-O octahedral distortion.The ceramic comprises uniform grains with a homogeneous elemental distribution,clear grain boundaries,and no obvious cavities at x=0.02.The Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)ceramics exhibited good microwave dielectric properties,with optimal performance observed at x=0.02(dielectric constant(εr)=15.41,Q×f=112,375 GHz,and τ_(f)=-17.44 ppm/℃).The τ_(f) value was reduced to meet the temperaturestability requirements of 5G/6G communication systems by adding CaTiO_(3),with Sr_(1.02)Y_(2)O_(4.02)+2wt% CaTiO_(3) exhibiting ε_(r)=16.14,Q×f=51,004 GHz,andτf=0 ppm/℃.A dielectric resonator antenna prepared using Sr_(1.02)Y_(2)O_(4.02)+2wt%CaTiO_(3) exhibited a central frequency of 26.6 GHz,with a corresponding gain and efficiency of 3.66 dBi and 83.14%,respectively.Consequently,Sr_(1.02)Y_(2)O_(4).02-based dielectric resonator antennas are suitable for use in 5G millimeter-wave band(24.5-27.5 GHz)applications.

Review:Research progress on Fabry-Perot resonator antenna

The Fabry-Perot resonator (FPR) antenna has found wide applications in microwave and millimeter waves and recently attracted considerable interest. In this paper, a summary of planar and cylindrical structures, analytic models and research development is presented, and a comparison between these structures and analytic models is made, showing that such analytic models as the FP cavity mode, electromagnetic band gap (EBG) defect mode, transmission line mode, and leaky-wave mode are consistent when applied to analyze this type of resonator antenna. Some interesting topics under recent research, including dual or multi-band, improvement of gain bandwidth, low profile and beam control, are surveyed.

A Low-Profile Cylindrical Dielectric Resonator Antenna with Bandwidth-Enhancement Under Triple-Mode Resonance

A low-profile cylindrical dielectric resonator antenna(CDRA)with enhanced impedance bandwidth is proposed via sharing a single triple-mode dielectric resonator.Initially,the resonant frequencies of TM01d and TM02d modes of a conventional CDRA are maintained far away from each other under central probe feed.Next,a circular disk with an annular ring is loaded around the conventional CDRA,aiming to excite an additional mode between these dual modes.The electric fields demon-strate that the previous TM_(02δ) mode is transformed into the TM03d mode for the modified CDRA,and an additional TM_(02δ) mode is successfully excited between the TM_(01δ) and TM_(03δ) modes.As a result,the resonant frequencies of these three radiative modes are reallocated in proximity to each other,thus achieving the desired bandwidth enhancement.In addition,considering the small input impedance of the CDRA,a microstrip feeding line is introduced underneath the central probe for good impedance matching.With these arrangements,the resultant antenna can generate an extended bandwidth under simultaneous radiation of TM_(01δ),TM_(02δ),and TM_(03δ) modes.Finally,the proposed CDRA is designed,fabricated,and measured to validate the predicted per-formance.The simulated and measured results show that the impedance bandwidth(|S11|<-10 dB of the antenna is dramatically extended from 8%to about 62%(2.835.36 GHz),while keeping a stable conical radiation pattern.In particular,a low profile property of about 0.15 free space wavelength is achieved as well.

Coupled two aluminum nanorod antennas for near-field enhancement

Aluminum （Al） plasmonic nanoantennas pos- sess many tunabilities in the ultraviolet （UV） region and have a variety of new applications, such as in sensitive UV photodetection and UV photolithography. Using discrete dipole approximation （DDA）, the resonant optical proper- ties and enhanced local field distribution of coupled Al nanorod antennas were investigated. The effects of gap distance on the extinction spectra were analyzed to obtain the surface plasmon modes of these nanostructures across the visible and in the UV spectral range, which can be attributed to the coupling of the surface plasmon modes from each Al nanorod. In addition, the enhanced local field factors plotted as a function of gap distance were simulated under transverse and longitudinal polarizations to achieve maximum near-field enhancement for the optical antennas. When the gap distance was decreased to 5 nm, the maximum value of the enhanced factor was 18.04 at the transverse mode peak of 424 nm. This could be explained by the combination of the interaction between the charges distributed at the opposite ends of two Al nanorods and the interaction between the charges distributed at the lateral sides of each Al nanorod. Results showed that the coupled Al nanorod antennas with enhanced local field show promise for UV plasmonics.