期刊文献+
共找到1,269篇文章
< 1 2 64 >
每页显示 20 50 100
Optimizing Bucket Elevator Performance through a Blend of Discrete Element Method, Response Surface Methodology, and Firefly Algorithm Approaches
1
作者 Pirapat Arunyanart Nithitorn Kongkaew Supattarachai Sudsawat 《Computers, Materials & Continua》 SCIE EI 2024年第8期3379-3403,共25页
This research introduces a novel approach to enhancing bucket elevator design and operation through the integration of discrete element method(DEM)simulation,design of experiments(DOE),and metaheuristic optimization a... This research introduces a novel approach to enhancing bucket elevator design and operation through the integration of discrete element method(DEM)simulation,design of experiments(DOE),and metaheuristic optimization algorithms.Specifically,the study employs the firefly algorithm(FA),a metaheuristic optimization technique,to optimize bucket elevator parameters for maximizing transport mass and mass flow rate discharge of granular materials under specified working conditions.The experimental methodology involves several key steps:screening experiments to identify significant factors affecting bucket elevator operation,central composite design(CCD)experiments to further explore these factors,and response surface methodology(RSM)to create predictive models for transport mass and mass flow rate discharge.The FA algorithm is then applied to optimize these models,and the results are validated through simulation and empirical experiments.The study validates the optimized parameters through simulation and empirical experiments,comparing results with DEM simulation.The outcomes demonstrate the effectiveness of the FA algorithm in identifying optimal bucket parameters,showcasing less than 10%and 15%deviation for transport mass and mass flow rate discharge,respectively,between predicted and actual values.Overall,this research provides insights into the critical factors influencing bucket elevator operation and offers a systematic methodology for optimizing bucket parameters,contributing to more efficient material handling in various industrial applications. 展开更多
关键词 Discrete element method(DEM) design of experiments(DOE) firefly algorithm(FA) response surface methodology(rsm)
下载PDF
Optimization of Preparation of Oregano Oil Microspheres by Box-Behnken Response Surface Methodology
2
作者 Fei HAN Mengyao TU +5 位作者 Hui YANG Hekun DUAN Fuhao HU Xinli LIANG Yang GUAN Wei XU 《Medicinal Plant》 2024年第4期40-45,共6页
[Objectives]To optimize the formulation and preparation of oregano oil microspheres by Box-Behnken response surface methodology.[Methods]Chitosan was used as the carrier material to prepare oregano oil microspheres by... [Objectives]To optimize the formulation and preparation of oregano oil microspheres by Box-Behnken response surface methodology.[Methods]Chitosan was used as the carrier material to prepare oregano oil microspheres by emulsion crosslinking method.The encapsulation efficiency,drug loading and ID 50 were used as the evaluation indicators,and the comprehensive score(OD)obtained by"coefficient of variation-AHP comprehensive weighting method"was used as the final evaluation indicator.The formulation design and preparation process were optimized by single factor experiment and Box-Behnken response surface methodology,and the optimal process parameters were determined.[Results]The optimal formulation and preparation process parameters of oregano oil microspheres were as follows:the ratio of oregano oil to chitosan was 2∶1,the emulsifying speed of double emulsion was 200 r/min,the amount of emulsifier in the colostrum was 4%,and the volume of curing agent was 1.0 mL.The average encapsulation efficiency was 45.33%±1.32%,the average drug loading was 30.59%±2.45%,and the median diameter(ID 50)was 52.596μm±0.023%.[Conclusions]The encapsulation efficiency,drug loading and ID 50 of oregano oil chitosan microspheres prepared by emulsion crosslinking method met the requirements.The drug-loaded microsphere not only can be used as a preparation finished product for direct application,but also be used as a product intermediate to lay a foundation for the research and development of subsequent dosage forms. 展开更多
关键词 Oregano oil CHITOSAN MICROSPHERES PREPARATION response surface methodology(rsm)
下载PDF
Optimization of Preparation Conditions of Modified Oyster Shell Powder/Ce-N-TiO2 by Response Surface Methodology (RSM)
3
作者 Wei Zhang Qizheng You +3 位作者 Jinkai Shu Aihe Wang Hai Lin Xuchao Yan 《Journal of Environmental Protection》 CAS 2023年第1期16-31,共16页
A new composite photocatalyst of modified oyster shell powder/Ce-N-TiO<sub>2</sub> was prepared by sol-gel method. Based on single factor experiment, Ce doping rate, N doping rate and calcination temperatu... A new composite photocatalyst of modified oyster shell powder/Ce-N-TiO<sub>2</sub> was prepared by sol-gel method. Based on single factor experiment, Ce doping rate, N doping rate and calcination temperature were taken as input variables. Based on the central composite design (BBD) response surface model, two functional relationship models between three independent variables and glyphosate removal rate were established to evaluate the influence degree of independent variables and interaction on catalyst. The significance of the model and regression coefficient was tested by variance analysis. The analysis of the obtained data showed that the degradation performance of the composite photocatalyst was significantly affected by the calcination temperature and the rate of N doping, while the rate of Ce doping had little effect;at the calcination temperature of 505.440°C, the degradation rate of glyphosate reached the maximum of 82.15% under the preparation conditions of 17.057 mol% N doping and 0.165 mol% Ce doping, respectively. 展开更多
关键词 Modified Titanium Dioxide response surface methodology (rsm) PHOTOCATALYSIS GLYPHOSATE
下载PDF
Deformation prediction and analysis of underground mining during stacking of dry gangue in open-pit based on response surface methodology 被引量:6
4
作者 QIU Xian-yang CHEN Jia-yao +3 位作者 SHI Xiu-zhi ZHANG Shu ZHOU Jian CHEN Xin 《Journal of Central South University》 SCIE EI CAS CSCD 2018年第2期406-417,共12页
Deformation prediction and the analysis of underground goaf are important to the safe and efficient recovery of residual ore when shifting from open-pit mining to underground mining.To address the comprehensive proble... Deformation prediction and the analysis of underground goaf are important to the safe and efficient recovery of residual ore when shifting from open-pit mining to underground mining.To address the comprehensive problem of stability in the double mined-out area of the Tong-Lv-Shan(TLS)mine,which employed the dry stacked gangue technology,this paper applies the function fitting theory and a regression analysis method to screen the sensitive interval of four influencing factors based on single-factor experiments and the numerical simulation software FLAC3D.The influencing factors of the TLS mine consist of the column thickness(d),gob area span(D),boundary pillar thickness(h)and height of tailing gangue(H).The fitting degree between the four factors and the displacement of the gob roof(W)is reasonable because the correlation coefficient(R2)is greater than0.9701.After establishing29groups that satisfy the principles of Box-Behnken design(BBD),the dry gangue tailings process was re-simulated for the selected sensitive interval.Using a combination of an analysis of variance(ANOVA),regression equations and a significance analysis,the prediction results of the response surface methodology(RSM)show that the significant degree for the stability of the mined-out area for the factors satisfies the relationship of h>D>d>H.The importance of the four factors cannot be disregarded in a comparison of the prediction results of the engineering test stope in the TLS mine.By comparing the data of monitoring points and function prediction,the proposed method has shown promising results,and the prediction accuracy of RSM model is acceptable.The relative errors of the two test stopes are1.67%and3.85%,respectively,which yield satisfactory reliability and reference values for the mines. 展开更多
关键词 response surface methodology (rsm) Box-Behnken design (BBD) numerical simulation boundary pillar deformation prediction
下载PDF
Effects of main ecological factors on the growth of marine green alga Caulerpa sertularioides using the response surface methodology
5
作者 Bingxin Huang Yue Chu +2 位作者 Rongjuan Wang Yixiao Wang Lanping Ding 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2023年第11期90-97,共8页
Caulerpa sertularioides is an invasive potential blooming green alga in China but it remains poorly studied.We studied the effects of ecological factors on its growth.Optimum conditions of ecological factors,i.e.,irra... Caulerpa sertularioides is an invasive potential blooming green alga in China but it remains poorly studied.We studied the effects of ecological factors on its growth.Optimum conditions of ecological factors,i.e.,irradiance,temperature,and salinity,for the growth of its fragments were determined in the response surface methodology(RSM).The specific growth rates(SGR)of the fragments were determined in single-factor experiment.The results show that the SGR of C.sertularioides peaked under the conditions of irradiance 37.5μmol/(m~2·s),temperature25℃,and salinity 30.Meanwhile,using the Box-Behnken design,the conditions were further optimized and verified to be:irradiance 39.03μmol/(m~2·s),temperature 25.29℃,and salinity 30.06,under which the SGR reached 4.66%.The results provide new theoretical data and solutions for the cultivation,invasion prediction,and monitoring of Caulerpa species in China and the world.The RSM method may have great potential applications in the environmental adaptation characteristics of new macroalgal cultivars,intensive orientation cultured germplasm,and environmental hazard analysis of cultivated species in the field. 展开更多
关键词 Caulerpa sertularioides FRAGMENT response surface methodology(rsm) ecological factor
下载PDF
Optimization for Microbial Degumming of Ramie with Bacillus subtilis DZ_(5) in Submerged Fermentation by Orthogonal Array Design and Response Surface Methodology
6
作者 刘芬 陈杨栋 +2 位作者 朱鹏 曹张军 张兴群 《Journal of Donghua University(English Edition)》 CAS 2023年第5期475-481,共7页
As a kind of natural fiber,ramie fiber has distinctive advantages in textile application,but the application is limited due to the traditional degumming mode.Compared with the traditional degumming process,the microbi... As a kind of natural fiber,ramie fiber has distinctive advantages in textile application,but the application is limited due to the traditional degumming mode.Compared with the traditional degumming process,the microbial degumming process has many advantages.To obtain the optimal conditions for degumming ramie with Bacillus subtilis DZ_(5)(BS DZ_(5)),a combined statistical approach of orthogonal array design(OAD)and response surface methodology(RSM)was used.The influences of initial pH of the bacteria medium,culture temperature,shaking speed,degumming time and inoculum size on submerged fermentation degumming were evaluated by using fractional factorial design.The main factors in the analysis were culture temperature,shaking speed and initial pH.The residual gum mass fraction was used as the optimization index,and the optimal conditions for degumming were determined by central composite design and RSM.Thus with only a limited number of experiments,an optimal ramie microbial degumming condition was found as the culture temperature of 40℃,the initial pH in the culture medium of 8.5,the shaking speed of 205 r/min,the degumming time of 96 h and the inoculum size of 5%.After microbial degumming of ramie under the optimal conditions,there was only 10.6%residual gum by mass in the fiber.In addition,the effective degumming of BS DZ_(5)was also confirmed by a scanning electron microscope(SEM). 展开更多
关键词 microbial degumming OPTIMIZATION RAMIE orthogonal array design(OAD) response surface methodology(rsm)
下载PDF
Optimization of Solid-state Fermentation Conditions of Sophora japonica cv.jinhuai by Response Surface Methodology
7
作者 Miao YANG Chaohao GU +5 位作者 Qiling LI Zhiqiang HUANG Hao LIU Yanxi LAI Zongyou CHEN Kaimei ZHU 《Medicinal Plant》 CAS 2023年第5期36-41,共6页
[Objectives]To optimize the solid-state fermentation process of Flos Sophorae Immaturus by Penicillium with Sophora japonica cv.jinhuai as raw material.[Methods]The fermentation conditions were optimized by single fac... [Objectives]To optimize the solid-state fermentation process of Flos Sophorae Immaturus by Penicillium with Sophora japonica cv.jinhuai as raw material.[Methods]The fermentation conditions were optimized by single factor experiment and response surface methodology with quercetin content as the dependent variable.[Results]According to the established model,the optimal fermentation process of Flos Sophorae Immaturus was obtained as follows:temperature 29.97℃,time 6.88 d,rotation speed 180.86 rpm,inoculation amount 3.93 mL,and the expected content of quercetin was 34.8053 mg/g.Based on this,the fermentation parameters were adjusted,and the actual content was 33.67 mg/g,which was close to the predicted value.[Conclusions]The optimization of fermentation process of Flos Sophorae Immaturus by response surface methodology provides a reference for the development and utilization of this medicinal material. 展开更多
关键词 Sophora japonica cv.Jinhuai QUERCETIN PENICILLIUM Fermentation process response surface methodology(rsm)
下载PDF
Optimisation of beef tenderisation treated with bromelain using response surface methodology (RSM) 被引量:6
8
作者 S. Zainal K. Z. Nadzirah +1 位作者 A. Noriham I. Normah 《Agricultural Sciences》 2013年第5期65-72,共8页
The purpose of this study is to determine the optimum condition for the tenderization of beef by bromelain using Response Surface Methodology (RSM). Initially, bromelain powder was produced from pineapple crown of var... The purpose of this study is to determine the optimum condition for the tenderization of beef by bromelain using Response Surface Methodology (RSM). Initially, bromelain powder was produced from pineapple crown of variety N36. Production of the bromelain powder involves several process steps such as extraction, purification, desalting and freeze drying. The cube size beef of round part was treated with bromelain at different pHs of beef, immersion temperatures, bromelain solution concentrations, and immersion times according to the experimental design which was recommended by RSM of MINITAB software version 15. Beef tenderness was then measured by Texture Analyser. The MINITAB software Version 15 was used to optimise the tenderisation of beef by bromelain. The determination coefficient R2 was 99.97% meaning that the experimental data were acceptable. It was found that beef could be optimize tenderised 89.907% at the optimum condition at pH of beef of 5.4, immersion temperature of60℃, bromelain solution concentration of 0.1682% and immersion time of 10 minutes. The verification value of beef ten-derisation at the feasible optimum condition which was determined by experiment was 89.571%. Since the difference between the veri- fication and predicted values was less than 5%, therefore, the optimum condition for the tenderisation of beef predicted by MINITAB software Version 15 could be accepted. 展开更多
关键词 BEEF BROMELAIN Tenderisation response surface methodology (rsm)
下载PDF
Optimization of medium components using response surface methodology (RSM) for mycelium biomass and exopolysaccharide production by <i>Lentinus squarrosulus</i> 被引量:5
9
作者 Rahayu Ahmad Najeeb Kaid Nasser Al-Shorgani +2 位作者 Aidil Abdul Hamid Wan Mohtar Wan Yusoff Fauzi Daud 《Advances in Bioscience and Biotechnology》 2013年第12期1079-1085,共7页
The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Respo... The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Response Surface Methodology (RSM). A central composite design (CCD) was applied and a polynomial regression model with quadratic term was used to analyse the experimental data using analysis of variance (ANOVA). ANOVA analysis showed that the model was very significant (p Lentinus squarrosulus are as follows: sucrose concentration 114.61 g/L, yeast extract 1.62 g/L and initial pH of 5.81;sucrose concentration 115.8 g/L, yeast extract of 3.39 g/L and initial pH of 6.44 respectively. 展开更多
关键词 Lentinus squarrosulus response surface methodology (rsm) EXOPOLYSACCHARIDE SUBMERGED Culture Central Composite Design (CCD)
下载PDF
Optimization of a continuous ultrasound assisted oxidative desulfurization(UAOD) process of diesel using response surface methodology(RSM) considering operating cost 被引量:2
10
作者 Mohammad Dana Mohammad Amin Sobati +1 位作者 Shahrokh Shahhosseini Aminreza Ansari 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2020年第5期1384-1396,共13页
A continuous-flow ultrasound-assisted oxidative desulfurization(UAOD)of partially hydro-treated diesel has been investigated using hydrogen peroxide-formic acid as simple and easy to apply oxidation system.The effects... A continuous-flow ultrasound-assisted oxidative desulfurization(UAOD)of partially hydro-treated diesel has been investigated using hydrogen peroxide-formic acid as simple and easy to apply oxidation system.The effects of different operating parameters of oxidation stage including residence time(2–24 min),formic acid to sulfur molar ratio(10–150),and oxidant to sulfur molar ratio(5–35)on the sulfur removal have been studied using response surface methodology(RSM)based on Box–Behnken design.Considering the operating costs of the continuous-flow oxidation stage including chemical and electrical energy consumption,the appropriate values of operating parameters were selected as follows:residence time of 16 min,the formic acid to sulfur molar ratio of 54.47,and the oxidant to sulfur molar ratio of 8.24.In these conditions,the sulfur removal and the volume ratio of the hydrocarbon phase to the aqueous phase were 86.90%and 4.34,respectively.By drastic reduction in the chemical consumption in the oxidation stage,the volume ratio of the hydrocarbon phase to the aqueous phase was increased up to 10.Therefore,the formic acid to sulfur molar ratio and the oxidant to sulfur molar ratio were obtained 23.64 and 3.58,respectively,which lead to sulfur removal of 84.38%with considerable improvements on the operating cost of oxidation stage in comparison with the previous works. 展开更多
关键词 Ultrasound-Assisted Oxidative Desulfurization(UAOD) Continuous-flow system Sulfur removal response surface methodology(rsm) Operating cost
下载PDF
Cr(Ⅲ) removal from simulated solution using hydrous magnesium oxide coated fly ash: Optimization by response surface methodology (RSM) 被引量:1
11
作者 Min Xia Chunsong Ye +2 位作者 Kewu Pi Defu Liu Andrea R. Gerson 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2018年第5期1192-1199,共8页
Hydrous magnesium oxide coated fly ash (MFA) has environmental remediation potential by providing a sub- strate for the adsorption of aqueous Cr(Ⅲ). Aqueous Cr(Ⅲ) adsorption onto MFA was examined as a function... Hydrous magnesium oxide coated fly ash (MFA) has environmental remediation potential by providing a sub- strate for the adsorption of aqueous Cr(Ⅲ). Aqueous Cr(Ⅲ) adsorption onto MFA was examined as a function of MFA dosage, pH and initial Cr(Ⅲ) concentration with the Box-Behnken approach used for experimental design and optimization using response surface methodology (RSM). pH and dosage (dosage and concentration) have significant interactive effects on Cr(Ⅲ) adsorption efficiency. Analysis of variance shows that the response surface quadratic model is highly significant and can effectively predict the experimental outcomes. Cr(Ⅲ) removal effi- ciency of 98% was obtained using optimized conditions of MFA dosage, pH and initial Cr(Ⅲ) concentration of 1,5 7 g. L- 1, 4.11 and 126 mg. L- 1, respectively. Cr(Ⅲ) adsorption onto MFA is mainly attributed to the interaction between Or(Ⅲ) and the functional group --OH of the hydrous magnesium oxide, in all probability caused by chemisorptions. The results of this study can conduce to reveal the interactions between Cr(Ⅲ) pollutant and MFA characteristics, posing important implications for the cost-effective alternative adsorption technology in the treatment of heavy metal containing wastewater. 展开更多
关键词 Hydrous magnesium oxide Fly ash Cr(Ⅲ) removal OPTIMIZATION response surface methodology (rsm
下载PDF
One-step process for production of biodiesel from Jatropha curcas L. seeds: Optimization using Response Surface Methodology (RSM) 被引量:1
12
作者 Asnida Yanti Ani Mohd Fauzi Abdullah Mohd Azlan Mohd Ishak Khudzir Ismail 《Journal of Chemistry and Chemical Engineering》 2009年第12期15-22,共8页
Jatropha curcas L. (JCL) seeds were extracted and transesterified in-situ using supercritical methanol extraction in the absence of catalyst at different temperatures (200-280℃) and pressures (8-12 MPa), and at... Jatropha curcas L. (JCL) seeds were extracted and transesterified in-situ using supercritical methanol extraction in the absence of catalyst at different temperatures (200-280℃) and pressures (8-12 MPa), and at a fixed reaction time of 30 min with seeds-to-methanol ratio of 1:40 w/v. Design of experiment approach using five-level-two-factors design of Response Surface Methodology (RSM) was used to observe the effect of two independent variables i.e. temperature and pressure and the percent of biodiesel yield which required 13 runs. For optimization of the variables, Central Composite Rotatable Design (CCRD) was used for regression analysis and analysis of variance (ANOVA). The optimize conditions suggested by RSM were at T = 280℃ and P = 12.04 MPa. The predicted and experimental biodicsel yields were found to be 56.8% and 59.9%, respectively, with relatively small deviation errors of 1.59%. 展开更多
关键词 Jatropha curcas L. supercritical methanol In situ transesterification BIODIESEL response surface methodology (rsm
下载PDF
Removal of Fluoride from Water Using Mesoporous MCM-41: An Optimization Approach Using Response Surface Methodology (RSM) 被引量:1
13
作者 Bodhaditya Das Saumen Banerjee +4 位作者 Prasanta K. Raul Rashmi R. Devi Iohbor M. Umlong Anup K. Talukdar Sanjai K. Dwivedi 《Advances in Nanoparticles》 2021年第3期95-114,共20页
Fluoride above 1.5 mg<span><span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#f7f7f7;"="">·</span></span>L... Fluoride above 1.5 mg<span><span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#f7f7f7;"="">·</span></span>L<sup><span style="color:#4f4f4f;">-</span></sup><sup>1</sup> is injurious to health. Removal of fluoride from water using mesoporous MCM-41 as a strong adsorbent material has been attempted. Characterization using transmission electron microscopic study of calcined MCM-41 showed the regular hexagonal array of mesoporous channels with <span style="font-family:;" "="">an </span><span style="font-family:;" "="">average size of 20 nm and the surface area (BET study) of 1306.96 m<sup>2</sup><span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#f7f7f7;"="">·</span>g<sup><span style="color:#4f4f4f;">-</span></sup></span><sup>1</sup>. The average pore size of the particles was found to be 14.21 nm. <span style="font-family:;" "="">A </span><span style="font-family:;" "="">study on the effect of contact time on the removal of fluoride revealed that more than 85% uptake of fluoride onto MCM-41 was achieved at a contact time of 120 min. From </span><span style="font-family:;" "="">the </span><span style="font-family:;" "="">Langmuir adsorption study, the maximum sorption capacity of fluoride was found to be 63.05 mg/g at 301 K. From </span><span style="font-family:;" "="">the </span><span style="font-family:;" "="">thermodynamic study, the +ΔH<span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#ffffff;"="">o</span> value of 2.29 kJ<span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#f7f7f7;"="">·</span>mol<sup><span style="white-space:normal;"><sup></sup></span><span style="white-space:normal;color:#4f4f4f;">-</span></sup></span><sup>1</sup> indicated the endothermic nature of the removal process. Application of Response Surface Model suggested that 77.88% of fluoride removal can be achieved at fluoride concentration of 10 mg<span><span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#f7f7f7;"="">·</span></span>L<sup>-</sup><sup>1</sup>, pH (6.3)<span style="font-family:;" "="">,</span><span style="font-family:;" "=""> and contact time of 120 min.</span> 展开更多
关键词 MCM-41 Mesoporous Silica Adsorption FLUORIDE response surface methodology (rsm)
下载PDF
Optimization of Multigrain Premix for High Protein and Dietary Fibre Biscuits Using Response Surface Methodology (RSM)
14
作者 Kathalsar Ashwath Kumar Gopal Kumar Sharma +1 位作者 Mohammed Ayub Khan Anil Dutt Semwal 《Food and Nutrition Sciences》 2015年第9期747-756,共10页
In order to improve the nutritional quality of biscuits, a multigrain premix (MGP) was developed by using whole barley, sorghum, chickpea, pea and defatted soya flour, each at 20% level. The developed MGP had 26.28% p... In order to improve the nutritional quality of biscuits, a multigrain premix (MGP) was developed by using whole barley, sorghum, chickpea, pea and defatted soya flour, each at 20% level. The developed MGP had 26.28% protein, 10.13% insoluble dietary fiber and 7.38% soluble dietary fiber. The experiment was designed to optimise the MGP and wheat flour concentration for the development of multigrain biscuits with high protein, dietary fibre and to maximize the acceptability by the application of central composite rotatable design (CCRD) of Response Surface Methodology (RSM). The levels of incorporation of MGP and wheat flour were taken as variables whereas protein, soluble, insoluble fibers, biscuit dough hardness, breaking strength and overall acceptability (OAA) as responses. The optimum level of MGP and wheat flour obtained using numerical optimization was found to be 40 g and 60 g respectively. The biscuits prepared using these had 16.61% protein, 2.57% soluble fibre, and 6.67% insoluble fibre which is significantly (p ≤ 0.05) higher than control biscuit. 展开更多
关键词 Multigrain BISCUITS BREAKING Strength High PROTEIN and Fiber Multigrain PREMIX response surface methodology (rsm)
下载PDF
Synthesis of Poly(AAm-<i>co</i>-AA) and Investigation of its Swelling Behavior: Using Response Surface Methodology (RSM)
15
作者 Samira Heidari Jafar Saberi Doust Feridun Esmaeilzadeh 《Modeling and Numerical Simulation of Material Science》 2018年第4期65-78,共14页
Unwanted water production together with oil and gas production is a striking problem in oil and gas industries, and many approaches have been examined to overcome this major problem. Preformed particle gels (PPGs) sho... Unwanted water production together with oil and gas production is a striking problem in oil and gas industries, and many approaches have been examined to overcome this major problem. Preformed particle gels (PPGs) showed dramatically good properties for this purpose in mature oil and gas reservoirs. In this study, we carefully synthesized an efficient series of PPGs with using a design of experiments (DOE) software. Acrylamide (AAm)/Acrylic acid (AA) mole ratio, N,N’-methylenebisacrylamide (MBA) mole percentage and swelling time were considered as key parameters to examine PPG swelling behavior. Our results presented a detailed empirical correlation, which could significantly predict the swelling capacity of PPGs in CaCl2 salt solution (200,000 ppm). 展开更多
关键词 response surface methodology (rsm) Optimization Synthesis Water CONFORMANCE
下载PDF
Overview on Application of Response Surface Methodology (RSM) in Treatment of Palm Oil Mill Effluent (POME)
16
作者 Mohd Azwan Ahmad Luqman Chuah Abdullah +1 位作者 Thomas Choong Shean Yax~ Abdul Wahab Mohammad 《Journal of Environmental Science and Engineering(B)》 2015年第3期111-118,共8页
There are many factors affecting the performance of a treatment system especially in the treatment of palm oil mill effluent (POME) as its contains high amounts of suspended solid, low pH, high salt content and high... There are many factors affecting the performance of a treatment system especially in the treatment of palm oil mill effluent (POME) as its contains high amounts of suspended solid, low pH, high salt content and high chemical oxygen demand (COD). However, one factor at a time approach is complicated method in establishing relationship between multiple parameters. Response surface methodology (RSM) is a recommended approach as it is widely used to analyze and study the interactions between multiple parameters and provides optimum output as well as minimizing the defects which result in good treatment system. This paper overviews the recent and current research in the application of RSM in optimizing the treatment development of POME. 展开更多
关键词 Palm oil mill effluent (POME) multiple parameters response surface methodology (rsm).
下载PDF
Response surface method using grey relational analysis for decision making in weapon system selection 被引量:9
17
作者 Peng Wang Peng Meng Baowei Song 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2014年第2期265-272,共8页
A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making (MADM) proble... A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making (MADM) problem. This paper proposes a new mathematical model based on the response surface method (RSM) and the grey relational analysis (GRA). RSM is used to obtain the experimental points and analyze the factors that have a significant impact on the selection results. GRA is used to an- alyze the trend relationship between alternatives and reference series. And then an RSM model is obtained, which can be used to calculate all alternatives and obtain ranking results. A real world application is introduced to illustrate the utilization of the model for the weapon selection problem. The results show that this model can be used to help decision-makers to make a quick comparison of alternatives and select a proper weapon system from multiple alternatives, which is an effective and adaptable method for solving the weapon system selection problem. 展开更多
关键词 weapon system multiple-attribute decision making(MADM) response surface method (rsm grey relational analysis(GRA).
下载PDF
Optimization of Inactivation Conditions of High Hydrostatic Pressure Using Response Surface Methodology 被引量:6
18
作者 GAOYu-long WANGYun-xiang JIANGHan-hu 《Agricultural Sciences in China》 CAS CSCD 2004年第7期528-534,共7页
Response surface methodology (RSM) was employed in the present work and a second orderquadratic equation for high hydrostatic pressure (HHP) inactivation was built. Theadequacy of the model equation for predicting the... Response surface methodology (RSM) was employed in the present work and a second orderquadratic equation for high hydrostatic pressure (HHP) inactivation was built. Theadequacy of the model equation for predicting the optimum response values was verifiedeffectively by the validation data. Effects of temperature, pressure, and pressureholding time on HHP inactivation of Escherichia coli ATCC 8739 were explored. Byanalyzing the response surface plots and their corresponding contour plots as well assolving the quadratic equation, the optimum process parameters for inactivation E. coliof six log cycles were obtained as: temperature 32.2℃, pressure 346.4 MPa, and pressureholding time 12.6min. 展开更多
关键词 High hydrostatic pressure (HHP) inactivation Escherichia coli response surface methodology (rsm) OPTIMIZATION Process parameter
下载PDF
Effect of frequency and pulse-on time of high power impulse magnetron sputtering on deposition rate and morphology of titanium nitride using response surface methodology 被引量:6
19
作者 Saeed GHASEMI Ali Reza FARHADIZADEH Hamid GHOMI 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2019年第12期2577-2590,共14页
Titanium nitride thin films were deposited on silicon by high power impulse magnetron sputtering(HiPIMS)method at different frequencies(162-637 Hz)and pulse-on time(60-322μs).Response surface methodology(RSM)was empl... Titanium nitride thin films were deposited on silicon by high power impulse magnetron sputtering(HiPIMS)method at different frequencies(162-637 Hz)and pulse-on time(60-322μs).Response surface methodology(RSM)was employed to study the simultaneous effect of frequency and pulse-on time on the current waveforms and the crystallographic orientation,microstructure,and in particular,the deposition rate of titanium nitride at constant time and average power equal to 250 W.The crystallographic structure and morphology of deposited films were analyzed using XRD and FESEM,respectively.It is found that the deposition rate of HiPIMS samples is tremendously dependent on pulse-on time and frequency of pulses where the deposition rate changes from 4.5 to 14.5 nm/min.The regression equations and analyses of variance(ANOVA)reveal that the maximum deposition rate(equal to(17±0.8)nm/min)occurs when the frequency is 537 Hz and pulse-on time is 212μs.The experimental measurement of the deposition rate under this condition gives rise to the deposition rate of 16.7 nm/min that is in good agreement with the predicted value. 展开更多
关键词 high powder impulse magnetron sputtering(HiPIMS) titanium nitride response surface methodology(rsm) deposition rate analyses of variance(ANOVA)
下载PDF
Improvement of xylanase production by Aspergillus niger XY-1 using response surface methodology for optimizing the medium composition 被引量:7
20
作者 Yao-xing XU Yan-li LI Shao-chun XU Yong LIU Xin WANG Jiang-wu TANG 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2008年第7期558-566,共9页
Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and t... Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and the central composite design (CCD) was employed to investigate the individual crucial component of the medium that significantly affected the enzyme yield. Results: Firstly, NaNO3, yeast extract, urea, Na2CO3, MgSO4, peptone and (NH4)2SO4 were screened as the significant factors positively affecting the xylanase production by PBD. Secondly, by valuating the nitrogen sources effect, urea was proved to be the most effective and economic nitrogen source for xylanase production and used for further optimization. Finally, the CCD and response surface methodology (RSM) were applied to determine the optimal concentration of each sig-nificant variable, which included urea, Na2CO3 and MgSO4. Subsequently a second-order polynomial was determined by multiple regression analysis. The optimum values of the critical components for maximum xylanase production were obtained as follows: x1 (urea)=0.163 (41.63 g/L), x2 (Na2CO3)=?1.68 (2.64 g/L), x3 (MgSO4)=1.338 (10.68 g/L) and the predicted xylanase value was 14374.6 U/g dry substrate. Using the optimized condition, xylanase production by Aspergillus niger XY-1 after 48 h fermentation reached 14637 U/g dry substrate with wheat bran in the shake flask. Conclusion: By using PBD and CCD, we obtained the optimal composition for xylanase production by Aspergillus niger XY-1 in SSF, and the results of no additional expensive medium and shortened fermentation time for higher xylanase production show the potential for industrial utilization. 展开更多
关键词 XYLANASE Optimization of medium composition Plackett-Burman design (PBD) Central composite design (CCD) response surface methodology (rsm). Aspergillus niger XY- 1
下载PDF
上一页 1 2 64 下一页 到第
使用帮助 返回顶部