On Differentiation Among Pilot Signals of Multiple Mobile Targets in Retro-Reflective Beamforming for Wireless Power Transmission

An experimental study is conducted on several retro-reflective beamforming schemes for wireless power transmission to multiple wireless power receivers(referred to herein as“targets”).The experimental results demonstrate that,when multiple targets broadcast continuous-wave pilot signals at respective frequencies,a retro-reflective wireless power transmitter is capable of generating multiple wireless power beams aiming at the respective targets as long as the multiple pilot signals are explicitly separated from one another by the wireless power transmitter.However,various practical complications are identified when the pilot signals of multiple targets are not appropriately differentiated from each other by the wireless power transmitter.Specifically,when multiple pilot signals are considered to be carried by the same frequency,the wireless power transmission performance becomes heavily dependent on the interaction among the pilot signals,which is highly undesirable in practice.In conclusion,it is essential for a retro-reflective wireless power transmitter to explicitly discriminate multiple targets’pilot signals among each other.

Planar Retro-Reflector for Grazing Incident Beam of High-Energy X-Ray Photons

The grazing-incidence hard X-ray retro-reflector (GIRR) is a novel optical element, which completely suppresses the conventional mirror beam in the retro-reflection mode, and, at the same time, totally reflects the primary grazing incident X-radiation backwards to its source in strictly anti-parallel direction with minimal scattering. The GIRR is a good alternative to hard X-ray normal-incidence Bragg mirror, and has a high potential for applications in various X-ray optical devices and techniques, such as, hard X-ray optical noise (or background) filters, high-quality hard X-ray waveguides, low-gain hard X-ray free electron laser resonators (XFELRs), X-ray holography, coherent X-ray diffraction imaging, phase-contrast imaging, as well as in hard X-ray optical data storage devices and deep space hard X-ray communications. The proposed optical element consists of single-crystal wafer covered by a thin, non-diffracting layer of low-absorbing material.

Degradation of Retro-Reflectivity of Thermoplastic Pavement Markings: A Review

For an effective thermoplastic pavement marking replacement strategy, the rate at which the marking’s retro-reflectivity deteriorates in service must be well established in order to avoid re-stripping that is too soon or too late. Against this background, this paper undertook a review of models that deal with degradation of thermoplastic pavement markings under different traffic and environmental conditions in order to establish service life and the terminal retro-reflectivity levels that have informed re-striping. Service life in the context of this paper is the time taken for a newly-installed marking to degrade to some minimum retro-reflectivity level below which motorists would find it difficult to navigate on the carriageway under night-time and poor visibility conditions. It was established that the minimum retro-reflectivity requiring re-stripping intervention reported varied, although commonly-adopted values tended to range from 50 mcd/m2/lx to 150 mcd/m2/lx. A number of empirical models, based on site specific conditions, have been developed by researchers using field data, to estimate marking retro-reflectivity at any time since placement. Whereas some of the models used time as the only independent variable, others used a combination of time, traffic level and a few other parameters to estimate retro-reflectivity. Even though degradation of marking retro-reflectivity is a reflection, among other things of material degeneration impacted by environmental and service conditions, almost all the models reviewed failed to consider environmental factors. Additionally, for some of the models, non-inclusion of the initial retro-reflectivity level and their generally low coefficient of determination statistic erode the confidence in their reliability.

Spin transport properties in ferromagnet/superconductor junctions on topological insulator

The spin-dependent Andreev reflection is investigated theoretically by analyzing the electronic transport in a thin-film topological insulator(TI)ferromagnet/superconductor(FM/SC)junction.The tunneling conductance and shot noise are calculated based on the Dirac-Bogoliubov-de Gennes equation and Blonder-Tinkham-Klapwijk theory.It is found that the magnetic gap in ferromagnet can enhance the Andreev retro-reflection but suppress the specular Andreev reflection.The gate potential applied to the electrode on top of superconductor can enhance the two types of reflections.There is a transition between the two types of reflections at which both the tunneling conductance and differential shot noise become zero.These results provide a method to realize and detect experimentally the intra-band specular Andreev reflection in thin film TI-based FM/SC structures.

Refractometric Fiber Optic Sensor for Detecting Salinity of Water

Salinity is an important property of industrial and natural waters. It is defined as the measure of the mass of dissolved salts in a given mass of solution. High salinity has an impact on people and industries reliant on water. High levels of salt can reduce crop yields, limit the choice of crops that can be grown and, at higher concentrations over long periods, can kill trees and make the land unsuitable for agricultural purposes. Salinity increases the “hardness” of water, which can mean more soap and detergents have to be used or water softeners installed and maintained. This can also cause scaling in pipes and heaters. The experimental determination of the salt content by drying and weighing presents some difficulties due to the loss of some components. The only reliable way to determine the true or absolute salinity of natural water is to make a complete chemical analysis. However, the method is time consuming and cannot yield the precision necessity for accurate work. Thus to determine salinity, one normally used method involves the measurement of a physical property such as conductivity, density or refractive index. The paper reports the refractometric fiber optic sensor for detection of salinity of water. The mathematical model is developed for detection of the refractive index of liquid and simulated in MATLAB. The fiber optic sensor probe is developed to measure the refractive index of the solution containing different amount of salt dissolved in water i.e. different molar concentrations. Experiments are carried out using the developed probe for these solutions. Experimental results are showing good agreement with the simulated results.

Interplay between magnetic gap and quasiparticle lifetime in topological insulator ferromagnet/f-wave superconductor junctions

Using the modified Blonder-Tinkham-Klapwijk(BTK)theory,the interplay between the lifetime of quasi particles and the magnetic gap in a topological insulator-based ferromagnet/fwave superconductor(TI-based FM/f-wave SC)tunnel structure is theoretically studied.Two symmetries of f_(1) and f_(2) waves are considered for superconducting pairing states.The results indicate that reducing the finite quasi-particle lifetime will induce a transformation of energy-gap peaks into a zero-bias peak in tunneling conductance spectrum,as well as a transformation of energy-gap dips into a zero-bias dip in shot noise spectrum,ultimately resulting in the smoothing of the zero-bias conductance peak and the zero-bias shot noise dip.An increase in magnetic gap will suppress the tunnel conductance and shot noise when the conventional Andreev retroreflection dominates,but will enhance them when the specular Andreev reflection is dominant.Both specular Andreev reflection and conventional Andreev retro-reflection will be enhanced as the quasi-particle lifetime increases.When Fermi energy equals the magnetic gap,shot noise and tunneling conductance vanish across all energy ranges.These findings not only contribute to a better understanding of specular Andreev reflection in the FM/f-wave SC junction based on TIs but also provide insights for experimentally determining the f-wave pairing symmetry.

Numerical Model for the Characterization of Retro-reflective Materials Behavior in an Urban Street Canyon

In this work, a preliminary numerical model of the behavior of retro-reflective materials used as envelope coatings on street canyon buildings facades has been tested. Retro-reflective materials have a surface finish that allows to reflect the solar radiation back in the same direction of the incident radiation. In the last years this kind of materials has been studied as buildings envelope coating for their potentials in the reduction of the UHI effect. As a matter of fact, the angular dependence of their optical-radiative response would help to mitigate the phenomenon of radiative entrapment due to the urban fabric environment. For this reason, an urban canyon was selected as the most common urban architecture to perform the analysis. A virtual retroreflective material has been simulated considering its response as almost diffusive but in the same direction of the incident radiation. The assessment of the energy advantages of the adoption of a virtual retro-reflective material as envelope coating is investigated by means of a numerical model developed in MATLAB and based on the Gebhart factors theory. The final purpose of the numerical model is the evaluation of the surfaces solar loads by a comparison between perfectly diffusive materials and RR materials used as fa？ades coating.