A Novel Aircraft Air Conditioning System with a Sterilization Unit by Ultra-High-Temperature Air Stream

An aircraft cabin is a narrow,closed-space environment.To keep the air quality in cabin healthy for passengers,especially during an epidemic such as SARS-CoV-2(or 2019-nCoV)in 2020,a novel aircraft air conditioning system,called the ultra-high-temperature instantaneous sterilization air conditioning system(UHTACS),is proposed.Based on the proposed system,a simulation of the UHT-ACS is analysed in various flight states.In the UHT-ACS,the mixing air temperature of return and bleed air can reach temperature up to 148.8°C,which is high enough to kill bacilli and viruses in 2一8 s.The supply air temperature of the UHT-ACS in a mixing cavity is about 12 C in cooling mode both on the ground and in the air.The supply air temperature is about 42 C in heating mode.Compared with the air conditioning systems(ACS)of traditional aircraft the supply air temperatures of the UHT-ACS in the mixing cavity are in good agreement with those of a traditional ACS with 60%fresh air and 40%return air.Furthermore the air temperature at the turbine outlet of the UHT-ACS is higher than that of a traditional ACS which will help to reduce the risk of icing at the outlet.Therefore the UHT-ACS can operate normally in various flight states.

Field experimental study on the cooling effect of mine cooling system acquiring cold source from return air

With the increase of mining depth, more and deeper coal mines are limited by heat disaster. The cooling energy in deep mine cooling system comes from mine water inrush or ground cooling tower, but we cannot adopt the two methods because mine water inrush in many old coal mines in China is limited. What is more, the cooling pipelines cannot be put in narrow pit-shaft. To settle the problem above, according to the characteristics of Zhangxiaolou Coal Mine, this paper adopts the deep mine return air as the cooling energy for deep mine cooling system. In addition, we carried out cite test to extract cold energy from return air. Through monitoring the water quantity, water temperature of cooling system and air temperature, we got the thermodynamic equilibrium parameters during the cooling energy acquisition analysis and the effect of cooling system that the temperature and humidity on working face are respectively reduced to 8-12 ℃ and 8-15% through cooling. This research offers experimental reference for deep mine cooling which lacks cooling energy.

CO emission in the air return corner of the working face in shallow burial mining areas

In shallow burial mining areas, abnormal CO emission and the spontaneous combustion of coal are great threats to safety production at a fully-mechanised working face. In order to prevent the CO concentration in the air return corner from exceeding the critical limit, the paper studied the CO emission regularity and characteristics through theoretical analysis, experimental research and field observation. The results show that the main sources of CO emission were the spontaneous combustion of coal in the goaf and the exhaust emissions coming from underground motorised vehicles. The effect factors of CO emission were also investigated, such as seasonal climate changes, the advancing distance and advancing speed of the working face, the number of underground motorised vehicles and some other factors. In addition to these basic analyses, the influence mechanism of each influence factor was also summarised theoretically. Finally, this study researched the distribution and change law of CO concentration in the fully-mechanised working face in two aspects: controlling the change of monitoring points and time respectively. The research results provide a theoretical basis for preventing the CO concentration from exceeding the critical limit in the air return corner and reducing the possibility of spontaneous combustion of coal. Additionally, the results also provide important theoretical and practical guidelines for protecting miners' health in modern mines featuring high production and high efficiency all over the world.

Numerical analysis of the return flow solar air heater(RF-SAH)with assimilation of V-type artificial roughness

A novel design of Return Flow Solar Air Heater(RFSAH)with different arrangements of baffles especially V-Type Artificial roughness is simulated and numerically analyzed with energy balance equations.To enhance the effectiveness of baffles,numerous studies have been conducted.The performance of the RFSAH is studied in terms of thermal efficiency,thermo-hydraulic efficiency,and optimization of baffle parameters.Maximum Thermal efficiency and thermo-hydraulic efficiency are found in RFSAH with baffle on both sides of the absorber plate and mass flow rate above 0.2kg/s.Sensitivity analysis of the influencing parameters is carried out and reported the best performance of the system on selective geometrical parameters(ψ=0.7,β=20%,e/H=1,p/e=0.8,α=60°).The results obtained from the present model are validated with the published experimental results and have been found in quite reasonable agreement with an average error of 16.45%.Thermal and Thermohydraulic efficiency of RFSAH with a baffle on both sides of the absorber plate is maximum among baffles below,above,and on both sides of the absorber plate.It is observed that the thermal efficiency of RFSAH is greater than SF-SAH.The proposed optimum baffles roughness is suggested to increase the air upholding time period for more efficient output.