期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Giant reversible barocaloric effects with high thermal cycle stability in epoxybonded(MnCoGe)_(0.96)(CuCoSn)_(0.04) composite
1
作者 Yafei Kuang Kun Tao +7 位作者 Bo Yang Peng Tong Yan Zhang Zhigang Sun Kewei Zhang Dunhui Wang Jifan Hu Liang Zuo 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2024年第11期2528-2534,共7页
Hexagonal MnMX-based(M=Co or Ni,X=Si or Ge)alloys exhibit giant reversible barocaloric effects.However,giant volume expansion would result in the as-cast MnMX ingots fragmenting into powders,and inevitably bring the d... Hexagonal MnMX-based(M=Co or Ni,X=Si or Ge)alloys exhibit giant reversible barocaloric effects.However,giant volume expansion would result in the as-cast MnMX ingots fragmenting into powders,and inevitably bring the deterioration of mechanical properties and formability.Grain fragmentation can bring degradation of structural transformation entropy change during cyclic application and removal of pressure.In this paper,giant reversible barocaloric effects with high thermal cycle stability can be achieved in the epoxy bonded(MnCoGe)0.96(CuCoSn)0.04 composite.Giant reversible isothermal entropy change of 43.0 J·kg^(−1)·K^(−1) and adiabatic temperature change from barocaloric effects(ΔT_(BCE))of 15.6 K can be obtained within a wide temperature span of 30 K at 360 MPa,which is mainly attributed to the integration of the change in the transition temperature driven by pressure of−101 K·GPa^(−1) and suitable thermal hysteresis of 11.1 K.Further,the variation of reversibleΔ_(TBCE) against the applied hydrostatic pressure reaches up to 43 K·GPa^(−1),which is at the highest level among the other reported giant barocaloric compounds.More importantly,after 60 thermal cycles,the composite does not break and the calorimetric curves coincide well,demonstrating good thermal cycle stability. 展开更多
关键词 barocaloric effects cycle stability reversible isothermal entropy change reversible adiabatic temperature change MnCoGe alloys
下载PDF
Aging Effect on Lanthanum Doped Ferroelectric Lead Titanate Ceramics
2
作者 孙大志 金雪琴 +1 位作者 朱杰 朱玉丹 《Journal of Rare Earths》 SCIE EI CAS CSCD 2006年第z2期228-230,共3页
Ferroelectric devices are widely applied in many fields, such as energy conversion and communication. The aging effect in ferroelectric materials plays a central role in the reliability of the related equipments. But ... Ferroelectric devices are widely applied in many fields, such as energy conversion and communication. The aging effect in ferroelectric materials plays a central role in the reliability of the related equipments. But it is very difficult to understand the origin of aging effect in ferroelectrics because these materials possess different defects and exhibit various aging behavior. The reverse transition temperature in lead titanate doped with lanthanum increases during aging at ferroelectric phase was reported. It is well known that lattice defects, such as vacancies and solute atoms, are ubiquitous in crystalline solids. These point defects affect physical properties in ferroelectrics significantly. The abnormal increase of the reverse transition temperature was discussed in terms of diffusion of point defects during aging. Dielectric performance in the material after aging was measured and discussed as well. 展开更多
关键词 aging effect FERROELECTRIC reverse transformation temperature (Pb La)TiO3 rare earths
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部