To solve the fundamental problem of insufficient heat available during defrosting while ensuring the efficient and safe system operation for air-source heat pumps (ASHPs). A novel reverse-cycle defrosting (NRCD) metho...To solve the fundamental problem of insufficient heat available during defrosting while ensuring the efficient and safe system operation for air-source heat pumps (ASHPs). A novel reverse-cycle defrosting (NRCD) method based on thermal energy storage to eliminate frost off the outdoor coil surface was developed. Comparative experiments using both the stand reverse cycle defrosting (SRCD) method and the NRCD method were carried out on an experimental ASHP unit with a nominal 2.5 kW heating capacity. The results indicate that during defrosting operation, using the NRCD method improves discharge and suction pressures by 0.24 MPa and 0.19 MPa, respectively, shortens defrosting duration by 60%, and reduces the defrosting energy consumption by 48.1% in the experimental environment, compared with those by the use of SRCD method. Therefore, using the NRCD method can shorten the defrosting duration, improve the indoor thermal comfort, and reduce the defrosting energy consumption in defrosting.展开更多
Ice and frost buildup continuously pose significant challenges to multiple fields.As a promising de-icing/defrosting alternative,designing photothermal coatings that leverage on the abundant sunlight source on the ear...Ice and frost buildup continuously pose significant challenges to multiple fields.As a promising de-icing/defrosting alternative,designing photothermal coatings that leverage on the abundant sunlight source on the earth to facilitate ice/frost melting has attracted tremendous attention recently.However,previous designs suffered from either localized surface heating owing to the limited thermal conductivity or unsatisfied meltwater removal rate due to strong water/substrate interaction.Herein,we developed a facile approach to fabricate surfaces that combine photothermal,heat-conducting,and superhydrophobic properties into one to achieve efficient de-icing and defrosting.Featuring copper nanowire assemblies,such surfaces were fabricated via the simple template-assisted electrodeposition method,allowing us to tune the nanowire assembly geometry by adjusting the template dimensions and electrodeposition time.The highly ordered copper nanowire assemblies facilitated efficient sunlight absorption and lateral heat spreading,resulting in a fast overall temperature rise to enable the thawing of ice and frost.Further promoted by the excellent water repellency of the surface,the thawed ice and frost could be spontaneously and promptly removed.In this way,the all-in-one design enabled highly enhanced de-icing and defrosting performance compared to other nanostructured surfaces merely with superhydrophobicity,photothermal effect,or the combination of both.In particular,the defrosting efficiency could approach∼100%,which was the highest compared to previous studies.Overall,our approach demonstrates a promising path toward designing highly effective artificial deicing/defrosting surfaces.展开更多
基金Project(50606007) supported by the National Natural Science Foundation of China
文摘To solve the fundamental problem of insufficient heat available during defrosting while ensuring the efficient and safe system operation for air-source heat pumps (ASHPs). A novel reverse-cycle defrosting (NRCD) method based on thermal energy storage to eliminate frost off the outdoor coil surface was developed. Comparative experiments using both the stand reverse cycle defrosting (SRCD) method and the NRCD method were carried out on an experimental ASHP unit with a nominal 2.5 kW heating capacity. The results indicate that during defrosting operation, using the NRCD method improves discharge and suction pressures by 0.24 MPa and 0.19 MPa, respectively, shortens defrosting duration by 60%, and reduces the defrosting energy consumption by 48.1% in the experimental environment, compared with those by the use of SRCD method. Therefore, using the NRCD method can shorten the defrosting duration, improve the indoor thermal comfort, and reduce the defrosting energy consumption in defrosting.
基金financial support from the National Natural Science Foundation of China (51836002 and 52006025)Fundamental Research Funds for the Central Universities (DUT22LAB601 and DUT22LAB610)
文摘Ice and frost buildup continuously pose significant challenges to multiple fields.As a promising de-icing/defrosting alternative,designing photothermal coatings that leverage on the abundant sunlight source on the earth to facilitate ice/frost melting has attracted tremendous attention recently.However,previous designs suffered from either localized surface heating owing to the limited thermal conductivity or unsatisfied meltwater removal rate due to strong water/substrate interaction.Herein,we developed a facile approach to fabricate surfaces that combine photothermal,heat-conducting,and superhydrophobic properties into one to achieve efficient de-icing and defrosting.Featuring copper nanowire assemblies,such surfaces were fabricated via the simple template-assisted electrodeposition method,allowing us to tune the nanowire assembly geometry by adjusting the template dimensions and electrodeposition time.The highly ordered copper nanowire assemblies facilitated efficient sunlight absorption and lateral heat spreading,resulting in a fast overall temperature rise to enable the thawing of ice and frost.Further promoted by the excellent water repellency of the surface,the thawed ice and frost could be spontaneously and promptly removed.In this way,the all-in-one design enabled highly enhanced de-icing and defrosting performance compared to other nanostructured surfaces merely with superhydrophobicity,photothermal effect,or the combination of both.In particular,the defrosting efficiency could approach∼100%,which was the highest compared to previous studies.Overall,our approach demonstrates a promising path toward designing highly effective artificial deicing/defrosting surfaces.
