The precursors of La0.7Sr0.3-xCaxCo0.9Fe0.1O3-δ(LSCCF, x=0.05, 0.10, 0.15, 0.20) as the cathode materials for intermediate temperature solid oxide fuel cell (ITSOFC) were prepared by reverse titration co-precipitatio...The precursors of La0.7Sr0.3-xCaxCo0.9Fe0.1O3-δ(LSCCF, x=0.05, 0.10, 0.15, 0.20) as the cathode materials for intermediate temperature solid oxide fuel cell (ITSOFC) were prepared by reverse titration co-precipitation method with metal-nitrates as starting materials and mixed alkali (NaOH and Na2CO3) as a precipitating agent. The formation process of LSCCF from the precursors was monitored by TG-DSC, and the crystal structure and particles morphology of the precursors which were calcined at 600, 800, 1000 ℃ for 3 h were characterized using XRD, SEM technologies. Compared with the solid state reaction of constituent oxides, when the pH value of the precipitating solution was in the range of 9.1～9.5, the LSCCF powders from the precursors caclined at 800 ℃ for 3 h had high purity, homogeneous and single perovskite phase. The electrical conductivity of the LSCCF samples sintered at 1200 ℃ for 3 h, which was measured as a function of temperatures from 100 to 800 ℃ by DC four-probe method in air, decreased with x from 0.05 to 0.20. The value of electrical conductivity was almost equal because of Ca2+, Sr2+ co-dopant resulting in the 'mix effect' while x=0.10 or 0.15. The electrical conductivity of all doped samples was higher than 100 S·cm-1 at intermediate temperatures from 500 to 800 ℃, and there was good compatibility between the LSCCF cathode and Ce0.8Sm0.2O2 electrolyte.展开更多
Ce-doped Bi2O3 nanopowders were prepared by reverse titration chemical coprecipitation from Bi^3＋and Ce^（4＋）containing aqueous solution.Techniques of X-ray diffraction（XRD）,transmission electron microscopic（TEM...Ce-doped Bi2O3 nanopowders were prepared by reverse titration chemical coprecipitation from Bi^3＋and Ce^（4＋）containing aqueous solution.Techniques of X-ray diffraction（XRD）,transmission electron microscopic（TEM）and Fourier transform infrared spectroscopy（FTIR）were employed to characterize the as-synthesized materials.The XRD patterns indicated that the peaks can be easily indexed toβ-Bi2O3 and no diffraction peaks of Ce or other impurity phases were detected in the prepared samples.The calculated average crystalline size decreased from 31.72 to 11.96 nm when the Ce content increased from 1 wt%to 10 wt%.The morphology changed from flake-like into the spherical-like with increase in Ce content.The electric conductivity of Ce-doped Bi2O3 electrolyte was also investigated by two probe DC method.Conductivity analysis exhibited that the rate of conductivity increased with increasing Ce^2＋ratio,when the Ce concentration was up to 5 wt%,the as-synthesized Ce-doped Bi2O3 electrolyte showed the maximum value of conductivity（0.295 S？cm^（–1））.展开更多
Transparent polycrystaUine neodymiumdoped yttrium aluminum garnet ceramics （Nd：YAG） with better chemical stability, excellent optical and high temperature mechanical property is becoming a new laser host material. ...Transparent polycrystaUine neodymiumdoped yttrium aluminum garnet ceramics （Nd：YAG） with better chemical stability, excellent optical and high temperature mechanical property is becoming a new laser host material. The Nd：YAG precursor powders with loosely dispersed, slightly agglomerated and YAG cubic crystal phase were synthesized at 1100 ℃ by the co-precipitation method combined with the reverse strike,展开更多
Single phase of Ba1-x MgAl10O17 ： x Eu^2＋ （0.02≤ x ≤ 0. 14） phosphors was first successfully prepared by coprecipitation in aqueous medium with a “reverse strike” method, using oxalic acid and ammonia together...Single phase of Ba1-x MgAl10O17 ： x Eu^2＋ （0.02≤ x ≤ 0. 14） phosphors was first successfully prepared by coprecipitation in aqueous medium with a “reverse strike” method, using oxalic acid and ammonia together as precipitants. Completely crystallized phosphors were obtained at 1300 ℃, which is 300 ℃ lower than the temperature of solid-state reaction. Their photoluminescence was investigated under UV and VUV region, respectively. The emission spectra of Ba1-x MgAl10O17：xEu^2＋ samples excited by 254 or 147 nm showed a characteristic wide band with the peak centred at about 450 454 nm. Optimum emission intensity reached at x = 0.1 and then concentration quenching occurred. The synthesized phosphor shows 10% higher emission intensity than that prepared by solid-state reaction.展开更多
A series of Ni-CeO2 catalysts were prepared by co-precipitation method with Na2CO3, NaOH, and mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant, respectively. The effect of the precipitants on the catalyti...A series of Ni-CeO2 catalysts were prepared by co-precipitation method with Na2CO3, NaOH, and mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant, respectively. The effect of the precipitants on the catalytic performance, physical and chemical properties of Ni-CeO2 catalysts was investigated with the aid of X-ray diffraction （XRD）, Bmmaner-Emmett-Teller method （BET）, Fou- rier-transform infrared spectroscopy （FT-IR）, thermogravimetry （TG）, and H2-TPR characterizations. The Ni-CeO2 catalysts were exam- ined with respect to their catalytic performance for the reverse water-gas shift reaction, and their catalytic activities were ranked as： Ni-CeO2-CP （Na2CO3：NaOH=I：I）〉Ni-CeO2-CP（Na2CO3）〉Ni-CeO2-CP（NaOH）- Correlating to the characteristic results, it was found that the catalyst prepared by co-precipitation with mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant hadthe most amount of oxygen vacancies accompanied with highly dispersed Ni particles, which made the corresponding Ni-CeO2-CP（Na2CO3：NaOH=I： 1） catalyst exhibit the highest catalytic activity. While the precipitant of Na2CO3 or NaOH resulted in less or no oxygen vacancies in Ni-CeO2 catalysts. As a result, Ni-CeO2-CP（Na2CO3） and Ni-CeO2-CP（NaOH） catalysts presented poor catalytic performance.展开更多
基金the National High-Tech Development Plan (2006AA05Z417)the Natural Science Foundation of Lia-oning Province (20062145)the Education department of Liaoning Province (05L073)
文摘The precursors of La0.7Sr0.3-xCaxCo0.9Fe0.1O3-δ(LSCCF, x=0.05, 0.10, 0.15, 0.20) as the cathode materials for intermediate temperature solid oxide fuel cell (ITSOFC) were prepared by reverse titration co-precipitation method with metal-nitrates as starting materials and mixed alkali (NaOH and Na2CO3) as a precipitating agent. The formation process of LSCCF from the precursors was monitored by TG-DSC, and the crystal structure and particles morphology of the precursors which were calcined at 600, 800, 1000 ℃ for 3 h were characterized using XRD, SEM technologies. Compared with the solid state reaction of constituent oxides, when the pH value of the precipitating solution was in the range of 9.1～9.5, the LSCCF powders from the precursors caclined at 800 ℃ for 3 h had high purity, homogeneous and single perovskite phase. The electrical conductivity of the LSCCF samples sintered at 1200 ℃ for 3 h, which was measured as a function of temperatures from 100 to 800 ℃ by DC four-probe method in air, decreased with x from 0.05 to 0.20. The value of electrical conductivity was almost equal because of Ca2+, Sr2+ co-dopant resulting in the 'mix effect' while x=0.10 or 0.15. The electrical conductivity of all doped samples was higher than 100 S·cm-1 at intermediate temperatures from 500 to 800 ℃, and there was good compatibility between the LSCCF cathode and Ce0.8Sm0.2O2 electrolyte.
基金Funded by Changzhou Science and Technology Innovation Project(Nos.CC20140048,CC20130204)National Natural Science Foundation of China(No.51273027)2015 Research and Innovation Project for College Graduates of Jiangsu Province
文摘Ce-doped Bi2O3 nanopowders were prepared by reverse titration chemical coprecipitation from Bi^3＋and Ce^（4＋）containing aqueous solution.Techniques of X-ray diffraction（XRD）,transmission electron microscopic（TEM）and Fourier transform infrared spectroscopy（FTIR）were employed to characterize the as-synthesized materials.The XRD patterns indicated that the peaks can be easily indexed toβ-Bi2O3 and no diffraction peaks of Ce or other impurity phases were detected in the prepared samples.The calculated average crystalline size decreased from 31.72 to 11.96 nm when the Ce content increased from 1 wt%to 10 wt%.The morphology changed from flake-like into the spherical-like with increase in Ce content.The electric conductivity of Ce-doped Bi2O3 electrolyte was also investigated by two probe DC method.Conductivity analysis exhibited that the rate of conductivity increased with increasing Ce^2＋ratio,when the Ce concentration was up to 5 wt%,the as-synthesized Ce-doped Bi2O3 electrolyte showed the maximum value of conductivity（0.295 S？cm^（–1））.
文摘Transparent polycrystaUine neodymiumdoped yttrium aluminum garnet ceramics （Nd：YAG） with better chemical stability, excellent optical and high temperature mechanical property is becoming a new laser host material. The Nd：YAG precursor powders with loosely dispersed, slightly agglomerated and YAG cubic crystal phase were synthesized at 1100 ℃ by the co-precipitation method combined with the reverse strike,
基金Project supported bythe National Natural Science Foundation of China (50272026) ,the Excellent Young Teachers ProgramofMOE,China (EYTP) and the Natural Science Foundation of Gansu Province (ZS031-A25-033-C)
文摘Single phase of Ba1-x MgAl10O17 ： x Eu^2＋ （0.02≤ x ≤ 0. 14） phosphors was first successfully prepared by coprecipitation in aqueous medium with a “reverse strike” method, using oxalic acid and ammonia together as precipitants. Completely crystallized phosphors were obtained at 1300 ℃, which is 300 ℃ lower than the temperature of solid-state reaction. Their photoluminescence was investigated under UV and VUV region, respectively. The emission spectra of Ba1-x MgAl10O17：xEu^2＋ samples excited by 254 or 147 nm showed a characteristic wide band with the peak centred at about 450 454 nm. Optimum emission intensity reached at x = 0.1 and then concentration quenching occurred. The synthesized phosphor shows 10% higher emission intensity than that prepared by solid-state reaction.
基金Project supported by Natural Science Foundation of Zhejiang Province(Y4110220)Foundation of the Zhejiang Provincial Department of Education(Y200908245)Foundation of the Dinghai Academy of Science and Technology(201006)
文摘A series of Ni-CeO2 catalysts were prepared by co-precipitation method with Na2CO3, NaOH, and mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant, respectively. The effect of the precipitants on the catalytic performance, physical and chemical properties of Ni-CeO2 catalysts was investigated with the aid of X-ray diffraction （XRD）, Bmmaner-Emmett-Teller method （BET）, Fou- rier-transform infrared spectroscopy （FT-IR）, thermogravimetry （TG）, and H2-TPR characterizations. The Ni-CeO2 catalysts were exam- ined with respect to their catalytic performance for the reverse water-gas shift reaction, and their catalytic activities were ranked as： Ni-CeO2-CP （Na2CO3：NaOH=I：I）〉Ni-CeO2-CP（Na2CO3）〉Ni-CeO2-CP（NaOH）- Correlating to the characteristic results, it was found that the catalyst prepared by co-precipitation with mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant hadthe most amount of oxygen vacancies accompanied with highly dispersed Ni particles, which made the corresponding Ni-CeO2-CP（Na2CO3：NaOH=I： 1） catalyst exhibit the highest catalytic activity. While the precipitant of Na2CO3 or NaOH resulted in less or no oxygen vacancies in Ni-CeO2 catalysts. As a result, Ni-CeO2-CP（Na2CO3） and Ni-CeO2-CP（NaOH） catalysts presented poor catalytic performance.
