Effects of wing deformation on aerodynamic performance of a revolving insect wing

Flexible wings of insects and bio-inspired micro air vehicles generally deform remarkably during flapping flight owing to aerodynamic and inertial forces,which is of highly nonlinear fluid-structure interaction（FSI）problems.To elucidate the novel mechanisms associated with flexible wing aerodynamics in the low Reynolds number regime,we have built up a FSI model of a hawkmoth wing undergoing revolving and made an investigation on the effects of flexible wing deformation on aerodynamic performance of the revolving wing model.To take into account the characteristics of flapping wing kinematics we designed a kinematic model for the revolving wing in two-fold：acceleration and steady rotation,which are based on hovering wing kinematics of hawkmoth,Manduca sexta.Our results show that both aerodynamic and inertial forces demonstrate a pronounced increase during acceleration phase,which results in a significant wing deformation.While the aerodynamic force turns to reduce after the wing acceleration terminates due to the burst and detachment of leading-edge vortices（LEVs）,the dynamic wing deformation seem to delay the burst of LEVs and hence to augment the aerodynamic force during and even after the acceleration.During the phase of steady rotation,the flexible wing model generates more ver-tical force at higher angles of attack（40°–60°）but less horizontal force than those of a rigid wing model.This is because the wing twist in spanwise owing to aerodynamic forces results in a reduction in the effective angle of attack at wing tip,which leads to enhancing the aerodynamics performance by increasing the vertical force while reducing the horizontal force.Moreover,our results point out the importance of the fluid-structure interaction in evaluating flexible wing aerodynamics：the wing deformation does play a significant role in enhancing the aerodynamic performances but works differently during acceleration and steady rotation,which is mainly induced by inertial force in acceleration but by aerodynamic forces in steady rotation.

Thermal Effect of a Revolving Gaussian Beam on Activating Heat-Sensitive Nociceptors in Skin

We consider the problem of inducing withdrawal reflex on a test subject by exposing the subject’s skin to an electromagnetic beam. Heat-sensitive nociceptors in the skin are activated wherever the temperature is above the activation temperature. Withdrawal reflex occurs when the activated volume reaches a threshold. Previously we studied static beams with 3 types of power density distribution: Gaussian, super-Gaussian, and flat-top. We found that the flaptop is the best and the Gaussian is the worst in their performance with regard to 1) minimizing the time to withdrawal reflex, 2) minimizing the energy consumption and 3) minimizing the maximum temperature increase. The less-than-desirable performance of Gaussian beams is attributed to the uneven distribution of power density resulting in low energy efficiency: near the beam center the high power density does not contribute proportionally to increasing the activated volume;outside the beam effective radius the low power density fails to activate nociceptors. To overcome the drawbacks of Gaussian beams, in this study, we revolve a Gaussian beam around a fixed point to make the power density more uniformly distributed. We optimize the performance over two parameters: the spot size of static beam and the radius of beam revolution. We find that in comparison with a static Gaussian beam, a revolving Gaussian beam can reduce the energy consumption, and at the same time lower the maximum temperature.

Study on geometric models of non-numerically controlled machining revolving cutter with constant pitch

This paper presents a new approach of designing the revolving cutter with constant pitch, and provides geometric models. The corresponding models in the non-numerically controlled manufacturing, such as designing the helical groove, grinding wheel, relative feeding motion, and calculating the helical angle of the cutting edge, are introduced. The examples are given to testify that the design approach is simple and readily realized in machining the revolving cutter with constant pitch. The effective design and manufacture method provides general references for non-NC machining revolving cutter with constant pitch and reducing the equipments input.

Optical and Network Performance Analysis of XGS-PON System over Active Co-Existence PON Systems

We proposed an enhanced Reach Extender (RE) called Active Co-existence (ACEX) and investigate its performance with respect to XGS-PON system that co-exist with GPON and TWDM-PON system. The RE is consists of hybrid optical amplifier integrated (EDFA and SOA) with Co-existence Element (CEX) module which is installed at the Central Office (CO) together with the OLT system and act as a booster and pre-amplifier for the downstream and upstream optical signal respectively. The results show that the proposed ACEX is capable to support XGS-PON operation for a maximum distance of 35 km with 128 splitting ratio and up to 44 dB link loss.

Adaptive genetic diversity of dominant species contributes to species co-existence and community assembly

The synthesis of evolutionary biology and community ecology aims to understand how genetic variation within one species can shape community properties and how the ecological properties of a community can drive the evolution of a species.A rarely explored aspect is whether the interaction of genetic variation and community properties depends on the species'ecological role.Here we investigated the interactions among environmental factors,species diversity,and the within-species genetic diversity of species with different ecological roles.Using high-throughput DNA sequencing,we genotyped a canopydominant tree species,Parashorea chinensis,and an understory-abundant species,Pittosporopsis kerrii,from fifteen plots in Xishuangbanna tropical seasonal rainforest and estimated their adaptive,neutral and total genetic diversity;we also surveyed species diversity and assayed key soil nutrients.Structural equation modelling revealed that soil nitrogen availability created an opposing effect in species diversity and adaptive genetic diversity of the canopy-dominant Pa.chinensis.The increased adaptive genetic diversity of Pa.chinensis led to greater species diversity by promoting co-existence.Increased species diversity reduced the adaptive genetic diversity of the dominant understory species,Pi.kerrii,which was promoted by the adaptive genetic diversity of the canopy-dominant Pa.chinensis.However,such relationships were absent when neutral genetic diversity or total genetic diversity were used in the model.Our results demonstrated the important ecological interaction between adaptive genetic diversity and species diversity,but the pattern of the interaction depends on the identity of the species.Our results highlight the significant ecological role of dominant species in competitive interactions and regulation of community structure.

Experimental and Numerical Study on Vibration of the Full-Revolving Propulsion Ship Stern

In order to solve the severe vibration problems of an ocean engineering ship with a full-revolving propulsion system, the navigation tests, including forced vibration response test and modal test, are carded out in its stem. It is concluded from the comparison of the time-domain waveform and spectrum from different measurement points that three main factors lead to a high-level stern vibration. Firstly, the specific dynamic stiffness of a water tank is relatively small compared with its neighbor hold, which makes it act like a vibration isolator preventing vibrational energy transmitting to the main hold. Secondly, there exists high-density local modes in the working frequency range of the main engine and thus the local resonance occurs. Thirdly, the abnormal engagement of gears caused by the large deflection of the shaft bearing due to its low mounting rigidity leads to violent extra impulse excitations at high speeds. Then the modification against the dynamic defects is given by simply improving the specific stiffness of the water tanks. And the effect is validated by the FEM calculation. Some important experience is obtained with the problems being solved, which is useful in the design of ships with the same propulsion system. It is also believed that the dynamic consideration is as important as the static analysis for the ships, and that most of the vibration problems may be avoided with a proper acoustic design.

Study on the Relation between the Drape of Fabrics and Its Revolving Speed

Based on the tests of eight kinds of typical fabrics, the relation between the drape coefficient of different fabrics and its revolving speed was analyzed and discussed. The result of regression curve fitting of experimental data showed that the relation between drape coefficient of fabric and its revolving speed could be expressed by negative exponential equation. Meanwhile, the difference of drape coefficients between static and dynamic at 100 ～ 150r.p.m was suggested to be one of the expressing parameters of the lively degree of fabric dynamic drape.

Nano watermill driven by revolving charge

A novel nanoscale watermill for the unidirectional transport of water molecules through a curved single-walled carbon nanotube（SWNT） is proposed and explored by molecular dynamics simulations. In this nanoscale system, a revolving charge is introduced to drive a water chain confined inside the SWNT, the charge and the tube together serving as a nano waterwheel and nano engine. A resonance-like phenomenon is found, and the revolving frequency of the charge plays a key role in pumping the water chain. The water flux across the SWNT increases with respect to the revolving frequency of the external charge and it reaches its maximum when the frequency is 4 THz. Correspondingly, the number of hydrogen bonds in the water chain inside the SWNT decreases dramatically as the frequency increases from 4 THz to 25 THz. The mechanism behind the resonance phenomenon has been investigated systematically. Our findings are helpful for the design of nanoscale fluidic devices and energy converters.

The Predatory Function of Three Spiders to Two Insect Pests in Rice Within a Multi-species Co-existence System

The prey-seeking behavior of three spiders (X1-Pirata subpiraticus, X2-Clubiona japonicola and X3-Tetragnatha japonica) for brown plant hopper (X4-Nilaparvata lugens) and rice spittle bug (X5-Cal-litettix versicolor) was investigated, as well as how interference between and within species occurred, by using a quadratic regression rotational composite design. Six predation models derived from the analysis of interactions among and within predators and preys were developed. The total predatory capacity of spiders on rice insect pests after coexistence for one day can be expressed as follows: Y3 = 32.795 + 2.25X1 + 1.083X2 + 0.5X3 + 10.167X4 + 3.167X5 - 1.67X12 - 2.42X22 - 3.295X32 - 0.045X42 + 0.455X52 - 3.125X1X2 + 0.375X1X3 -0.625X1X4 - 0.375X1X5 + 0.375X2X3 - 0.875X2X4 + 0.125X2X5 + 0.375X3X4 - 0.375X3X5 + 0.125X4X5. The principal efficiency analysis using this model indicated that increases in insect pest density significantly increased predation by predators; this was much greater than the effect of any single predator. X4 had a greater effect than X5; however, X4 and X5 demonstrated little interspecific interference and even promoted each other and increased predation rates as the densities of the two pests increased. Among the three predators, an increase in the density of X, had the greatest effect on the increase in predation, X3 had the second, X2 the third greatest effect. As predator density increased inter- and intra-species interference occurred, which were largely related to the size, activity, niche breadth, niche overlap and searching efficiency of the predators. X2 produced the greatest interference between different individuals and between any other predator species. X3 had the second greatest, which reduced predation levels at high predator densities. Because of these factors, the highest predation rate was obtained at a prey density of 120 per 4 rice-hills. The optimal proportion of the three predators in the multi-predator prey system was X1: X2: X3 = 5.6:1.3:4.1.

Kanzanise Empimba za Nzima Atarikimanya Akangaya: The Story of Play-beans in Promoting Peaceful Co-existence

Afrikan narratives such as folktales,proverbs and taboos were clear systems and structures on which societies operated.These were used to guide society’s values that promoted trust,accountability,self respect and many more for the wellbeing of the entire community.This paper discussesone of the Banyankole folktale Kanzanise empimba za Nzima atarikimanya akangaya(Let me stand in the gap of my sister(Nzima)while she is away or else,I will be shamed in case she knows I did not).The purpose of the paper is to demonstrate how Afrikan indigenous knowledge and specifically this folktale Kanzanise empimba za Nzima atarikimanya akangaya inculcated in the community a spirit of care,commitment to one another and transparency which are fundamental values that create peaceful societies.The paper argues that there is a wealth of wisdom residing in the African cultures to be exploited to guide African policy development.This will raise African indigenous knowledge to a platform worth recognition for its contribution towards positive transformation.Furthermore,that the Western systems and structures currently guiding Afrikan policy development are oblivious of the richness of Afrikan indigenous knowledge that united the people.The paper concludes that for Afrikans to contribute to the global agenda,they need to bring to the table of globalization a unique product such as the Afrikan indigenous narratives that contribues to world peace.The paper recommends moving back into our past,identify and promote those unique Afrikan values that sustained Africa before the Western influence.

Surgical strategy in case with co-existence of malignant oligodendroglioma and arteriovenous malformation: A case report

A brain tumor associated with an arteriovenous malformation (AVM) is very rare. A 42-year-old female presented with two separate lesions in her right frontal lobe on MRI. An angiogram diagnosed one of the lesions as an AVM. The second lesion appeared to be a tumor. Tumor removal was difficult due to bleeding from the nearby AVM, necessitating removal of the AVM and allowing complete excision of the tumor. Histopathological analysis revealed the tumor was an anaplastic oligodendroglioma. There was no recurrence of the tumor 5 year after completion of therapy. We discuss the operative strategy in case of synchronous diseases and provide a review of the literature.

Reflections on Islam and Co-Existence in the Upper Cross River Region of Nigeria

Situated within the Cross River State of Nigeria, the Upper Cross River area covers the northern half of Cross River State comprising Ugep, Obubra, Ikom, Ogoja, and Obudu divisions. Bounded on the north by the Benue region, west by Ebonyi and Enugu states and east by the Republic of Cameroon, this unique area experienced colonial rule. Christianity established its dominance in this area during colonial times, leaving no room for Islam. However, following the 1967 to 1970 civil war, groups of Islamic traders, clerics, and businessmen started trickling into the area, and settling there. They began to spread their faith in the region hut could not establish their political presence there. Some familiarised themselves with the culture of the indigenous people, and won converts not by force, but via the proselytisation of their faith. Community leaders did not abandon the old verities which bound traditional society in the region together. The pattern was often a pragmatic choice--accepting the best of the faiths resulting in peaceful co-existence and assured social harmony in the region. Pockets of Islamic converts could be found in Ogoja, Obudu, and some strategic commercial locations in the region. Against this backdrop, the paper examines the co-existence of Islam in the Upper Cross River Region （UCRR） and the impact made economically, culturally and religiously on the peoples of the region. The research adopted secondary and primary sources of information in its methodology. It therefore established that the UCRR of Nigeria serves as an excellent example, or a convenient model for the study of mutual religious co-existence between adherents of the Islamic and other faiths in the region.

A Study on Drawing the Shadow of a Curve Revolving Object under Commonly Used Ray

The shadow of a circle casting on a unparallel plane is an ellipse, the shadow algorithm involves a perspective affine transformation. Under commonly used light, the transformation matrix for parallel circles of different diameters casting shadows onto the same plane is identical. Using AutoCAD to get the shadow of a general object of revolution, it only needs to take a series of circles along the axis of symmetry and get their corresponding shadows of ellipses, drawing an envelope to cover all these silhouettes results in the required overall shadow. Then the discrete points of shadow contour line are projected back onto the original object surface, shadow on the object is obtained altogether.

Cultural Co-existence

THE premiere of popular Chinese TV soapie Beijing Love Storywas widely hailed as a major cultural breakthrough in the Nigerian capital of Abuja on September 18. Dubbed into Hausa. one of Nigeria＇s major languages, the drama formed part of the Experience China program held by China＇s State Council Information Office （SCIO） in Abuja from September 10 to 19.

激流丝扰动下回转体边界层流动转捩的模态特征

水下航行体首部边界层转捩会产生较强的噪声,严重影响其通信及探测性能。为探明诱发水动力噪声的主要流动结构,本文以SUBOFF缩比模型为研究对象,采用高速水洞实验及大涡模拟方法,获得激流丝扰动下的水下回转体边界层流场。研究发现:边界层内流动在激流丝下游形成分离泡,在分离泡中后部发生转捩,诱发了大量多尺度非定常涡系。采用本征正交分解方法研究了边界层转捩区流向、法向速度脉动及压力脉动的模态特征,发现流向速度脉动的主导模态是分离泡及其沿流向的破碎和下游流向涡,其中分离泡区域流向速度脉动为低于3000 Hz的复合频率,下游流向涡为低于200 Hz的低频结构。法向速度脉动与压力脉动模态特征相似,都呈现出高频、宽频脉动特征,在分离泡附近强度最大。由此推测,分离泡及其破碎是边界层转捩的主要诱因,其诱发的法向速度脉动是产生高/宽频噪声的主要原因,流向速度脉动仅与低频噪声有关。

面向异构信号处理平台的量子调度算法

针对异构信号处理平台中已有调度算法的调度长度较大导致信号处理应用实时性下降问题,文中提出一种面向异构信号处理平台的量子调度算法。该算法采用任务优先级分流排序策略,得到更加准确的任务调度顺序。使用量子比特对任务分配方案进行编码,增加任务分配方案的多样性,且编码规则有助于跳出局部最优找到全局最优解。按照最小计算开销原则和任务复制思想进行处理器分配,减少任务间通信开销,并通过量子旋转门对量子编码方案进行更新,不断逼近最优解。仿真结果表明,所提算法能够减少调度长度,提升信号处理应用的实时性,进而提高平台的工作效率。

Responding of zooplankton to environmental factor changes in the Changjiang River estuarine regions in spring-summer from 2016 to 2020

The estuarine areas are under frequent influence from freshwater intrusion and ocean currents,in which zooplankton species are diversified and variable as they are sensitive to physio-chemical variations in water.Therefore,understanding the relationships between zooplankton and environmental factors help us know the water quality.To achieve co-existence with species in similar ecological group or habit,they could inevitably alter themselves to fit the ecology and adjust the function according to the competitive exclusion in ecological theory.However,information of the co-existence of dominant species in the Changjiang(Yangtze)River estuary(CRE)and adjacent waters remains scarce.We explored the relationships between dominant zooplankton and environmental factors in the study region in spring-summer from 2016 to 2020,involving particularly the composition of dominant species,ecological groups,their relationships with environmental factors,and co-existence of important species,using the non-multidimensional scale analysis(nMDS)method and redundancy analysis.Results show that Labidocera euchaeta and Tortanus vermiculus were dominant species in the study scope.The turnover rate of dominant zooplankton was greater(>50%)in spring while the species number was higher in summer.The dominant species were estuarine,offshore,and eurytopic based on the adaptation to salinity.In spring,the ecological groups were dominated by estuarine species,while in summer by estuarine and offshore species.In addition,the nMDS showed that the dominant species in the same ecological group were more dispersed and not prominently clustered;the dominant species were staggered among different ecological groups.The temperature,salinity,pH,dissolved oxygen,and chlorophyll a were the main environmental factors on the distribution of the dominant species in spring,while in summer were dissolved oxygen,temperature,salinity,and pH.The domination of medusae of Nemopsis bachei and Pleurobrachia globosa in zooplankton community in spring,and the continuous decrease in abundance of L.euchaeta reflected the effects of local climate change.The temperature and salinity changes in different years and the subsequent response of zooplankton reflected the influence of freshwater intrusion and/or ocean currents.Zooplankton in similar ecological habits exhibited the competitive exclusion in terms of co-existence.

用于再生聚酯纤维的新型MCZH活动盖板针布设计原理和应用

针对目前再生聚酯纤维盖板针布在梳理过程中存在静电集聚、缠绕、落棉增加、嵌杂、纤维沉入齿底等问题,文章根据纤维特点,设计了新型MCZH截切渐密型盖板针布:截切型矩形钢丝提高纤维转移效率、钢丝材质碳元素增加提高耐磨性、大角度降低落棉、渐密植针形式增加梳理效果、底布加厚减少形变、横向针尖密度增加提升拦截梳理效果等。结果表明,其在实践运用中,实现了再生聚酯纤维梳理落棉少、静电小、转移效果好、梳理质量高的效果。

某转膛自动机药筒提前出膛故障的力学机理

为揭示某转膛自动机抽壳前药筒提前出膛的故障原因,在分析故障现象基础上,利用流体力学模型计算了转膛体转动过程膛内压力变化规律。在此压力场中采用弹塑性有限元方法数值模拟了药筒贴膛及动态抽壳过程并获取抽壳阻力、抽壳速度等力学表征量,对抽壳过程药筒与炮膛的应力应变行为进行了深入研究,综合分析了抽壳前药筒提前出膛故障产生的力学机理。计算及分析结果表明:射击后转膛体转动过程中燃气排放通道逐渐减小并关闭,转到抽壳位时药室内仍残存较高压力的火药气体,该压力作用于药筒产生的轴向分力远大于抽壳阻力是造成药筒提前出膛故障的主要原因,在转膛自动机设计时应充分考虑转膛体转动过程中残余火药气体的排空问题。