Data-driven turbulence modeling studies have reached such a stage that the basic framework is settled,but several essential issues remain that strongly affect the performance.Two problems are studied in the current re...Data-driven turbulence modeling studies have reached such a stage that the basic framework is settled,but several essential issues remain that strongly affect the performance.Two problems are studied in the current research:(1)the processing of the Reynolds stress tensor and(2)the coupling method between the machine learning model and flow solver.For the Reynolds stress processing issue,we perform the theoretical derivation to extend the relevant tensor arguments of Reynolds stress.Then,the tensor representation theorem is employed to give the complete irreducible invariants and integrity basis.An adaptive regularization term is employed to enhance the representation performance.For the coupling issue,an iterative coupling framework with consistent convergence is proposed and then applied to a canonical separated flow.The results have high consistency with the direct numerical simulation true values,which proves the validity of the current approach.展开更多
With the two-scale expansion technique proposed by Yoshizawa,the turbulent fluctuating field is expanded around the isotropic field.At a low-order two-scale expansion,applying the mode coupling approximation in the Ya...With the two-scale expansion technique proposed by Yoshizawa,the turbulent fluctuating field is expanded around the isotropic field.At a low-order two-scale expansion,applying the mode coupling approximation in the Yakhot-Orszag renormalization group method to analyze the fluctuating field,the Reynolds-average terms in the Reynolds stress transport equation,such as the convective term,the pressure-gradient-velocity correlation term and the dissipation term,are modeled.Two numerical examples：turbulent flow past a backward-facing step and the fully developed flow in a rotating channel,are presented for testing the efficiency of the proposed second-order model.For these two numerical examples,the proposed model performs as well as the Gibson-Launder （GL） model,giving better prediction than the standard k-ε model,especially in the abilities to calculate the secondary flow in the backward-facing step flow and to capture the asymmetric turbulent structure caused by frame rotation.展开更多
A Reynolds stress closure based on the generalized Langevin model (GLM), developed by Haworth and Pope, is applied to the flow calculation with swirl-induced recirculation. The purpose of the work is to assess the per...A Reynolds stress closure based on the generalized Langevin model (GLM), developed by Haworth and Pope, is applied to the flow calculation with swirl-induced recirculation. The purpose of the work is to assess the performance of this model under the complex flow conditions caused by the presence of strong swirl which gives rise to both unconventional recirculation in the vicinity of the symmetry axis and strong anisotropy in the turbulence field. Comparison of the computational results are made both with the experimental data of Roback and Johnson and the computational results obtained with the typical isotropization of production model (IPM) and the k-∈ type Boussinesq viscosity model.展开更多
Most current computations of trubulent flows with second-moment closure adopt the diffusion mo- dels which neglect the effect of pressure-velocity correlation.ln the present paper the importance of this correlation ef...Most current computations of trubulent flows with second-moment closure adopt the diffusion mo- dels which neglect the effect of pressure-velocity correlation.ln the present paper the importance of this correlation effect is elucidated the neglect of this effect accounts for some major defects in the wide application of the se- cond-moment closures.Through the relation between and ,established by Lumley,we propose here a new turbulence diffusion model which takes into consideration the pressure effect.Applications of this new model in the computation of shearless turbulence mixing layer and plane-and round-jet flows show that the spreading rate of these flows can be satisfactorily captured.展开更多
Many industries in the world take part in the pollution of the environment. This pollution often comes from the reactions of combustion. To optimize these reactions and to minimize pollution, turbulence is a funda- me...Many industries in the world take part in the pollution of the environment. This pollution often comes from the reactions of combustion. To optimize these reactions and to minimize pollution, turbulence is a funda- mental tool. Several factors are at the origin of turbulence in the complex flows, among these factors, we can quote the effect of wings in the rotating flows. The interest of this work is to model and to simulate numeri- cally the effect of wings on the level of turbulence in the flow between two contra-rotating cylinders. We have fixed on these two cylinders eight wings uniformly distributed and we have varied the height of the wings to have six values from 2 mm to 20 mm by maintaining the same Reynolds number of rotation. The numerical tool is based on a statistical model in a point using the closing of the second order of the transport equations of the Reynolds stresses (Reynolds Stress Model: RSM). We have modelled wings effect on the flow by a source term added to the equation tangential speed. The results of the numerical simulation showed that all the average and fluctuating variables are affected the value of the kinetic energy of turbulence as those of Reynolds stresses increase with the height of the wings.展开更多
We investigate the role of extended intrinsic mean spin tensor introduced in this work for turbulence modelling in a non-inertial frame of reference. It is described by the Euclidean group of transformations and, in p...We investigate the role of extended intrinsic mean spin tensor introduced in this work for turbulence modelling in a non-inertial frame of reference. It is described by the Euclidean group of transformations and, in particular, its significance and importance in the approach of the algebraic Reynolds stress modelling, such as in a nonlinear K-ε model. To this end and for illustration of the effect of extended intrinsic spin tensor on turbulence modelling, we examine several recently developed nonlinear K-ε models and compare their performance in predicting the homogeneous turbulent shear flow in a rotating frame of reference with LES data. Our results and analysis indicate that, only if the deficiencies of these models and the like be well understood and properly corrected, may in the near future, more sophisticated nonlinear K-ε models be developed to better predict complex turbulent flows in a non-inertial frame of reference.展开更多
It is assumed in this paper that for a high Reynolds number nearly homogeneouswind flow, the Reynolds stresses are uniquely related to the mean velocity gradientsand the two independent turbulent scaling parameters k ...It is assumed in this paper that for a high Reynolds number nearly homogeneouswind flow, the Reynolds stresses are uniquely related to the mean velocity gradientsand the two independent turbulent scaling parameters k and E. By applying dimensionalanalysis and owing to the Cayley-Hamilton theorem for tensors, a new turbulenceenclosure model so-called the axtended k-ε model has been developed. The coefficientsof the model expression were detemined by the wind tunnel experimental data ofhomogeneous shear turbulent flow. The model was compared with the standard k-εmodel in in composition and the prediction of the Reynold's normal Stresses. Using thenew model the numerical simulation of wind flow around a square cross-section tallbuilding was performed. The results show that the extended k-ε model improves theprediction of wind velocities around the building the building and wind pressures on the buildingenvelope.展开更多
The aim of this study is to evaluate a three-equation turbulence model applied to pipe flow. Uncertainty is approximated by comparing with published direct numerical simulation results for fully-developed average pipe...The aim of this study is to evaluate a three-equation turbulence model applied to pipe flow. Uncertainty is approximated by comparing with published direct numerical simulation results for fully-developed average pipe flow. The model is based on the Reynolds averaged Navier-Stokes equations. Boussinesq hypothesis is invoked for determining the Reynolds stresses. Three local length scales are solved, based on which the eddy viscosity is calculated. There are two parameters in the model;one accounts for surface roughness and the other is possibly attributed to the fluid. Error in the mean axial velocity and Reynolds stress is found to be negligible.展开更多
Recently,the methodology of deep learning is used to improve the calculation accuracy of the Reynolds-averaged Navier-Stokes (RANS) model.In this paper,a neural network is designed to predict the Reynolds stress of a ...Recently,the methodology of deep learning is used to improve the calculation accuracy of the Reynolds-averaged Navier-Stokes (RANS) model.In this paper,a neural network is designed to predict the Reynolds stress of a channel flow of different Reynolds numbers.The rationality and the high efficiency of the neural network is validated by comparing with the results of the direct numerical simulation (DNS),the large eddy simulation (LES),and the deep neural network (DNN) of other studies.To further enhance the prediction accuracy,three methods are developed by using several algorithms and simplified models in the neural network.In the method 1.the regularization is introduced and it is found that the oscillation and the overfitting of the results are eflectively prevented.In the method 2,y^+ is embedded in the input variable while the combination of the invariants is simplified in the method 3.From the predicted results,it can be seen that by using the first two methods,the errors are reduced.Moreover,the method 3 shows considerable advantages in the DNS trend and the smoothness of a curve.Consequently,it is concluded that the DNNs can predict effectively the anisotropic Reynolds stress and is a promising technique of the computational fluid dynamics.展开更多
A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation bas...A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation based on the theoretical model. The mean velocity profile is also computed by using the same theoretical model. The theoretical results are in good agreement with those found from DNS, indicating that the theoretical model proposed can correctly describe the physical mechanism of turbulence in near wail region and it thus possibly opens a new way for turbulence modeling in this region.展开更多
The Speziale,Sarkar and Gatski Reynolds Stress Model(SSG RSM)is utilized to simulate the fluid dynamics in a full baffled stirred tank with a Rushton turbine impeller.Four levels of grid resolutions are chosen to dete...The Speziale,Sarkar and Gatski Reynolds Stress Model(SSG RSM)is utilized to simulate the fluid dynamics in a full baffled stirred tank with a Rushton turbine impeller.Four levels of grid resolutions are chosen to determine an optimised number of grids for further simulations.CFD model data in terms of the flow field,trailing vortex,and the power number are compared with published experimental results.The comparison shows that the global fluid dynamics throughout the stirred tank and the local characteristics of trailing vortices near the blade tips can be captured by the SSG RSM.The predicted mean velocity components in axial,radial and tangential direction are also in good agreement with experiment data.The power number predicted is quite close to the designed value,which demonstrates that this model can accurately calculate the power number in the stirred tank.Therefore,the simulation by using a combination of SSG RSM and MRF impeller rotational model can accurately model turbulent fluid flow in the stirred tank,and it offers an alternative method for design and optimisation of stirred tanks.展开更多
基金This work was supported by the National Natural Science Foundation of China(91852108,11872230 and 92152301).
文摘Data-driven turbulence modeling studies have reached such a stage that the basic framework is settled,but several essential issues remain that strongly affect the performance.Two problems are studied in the current research:(1)the processing of the Reynolds stress tensor and(2)the coupling method between the machine learning model and flow solver.For the Reynolds stress processing issue,we perform the theoretical derivation to extend the relevant tensor arguments of Reynolds stress.Then,the tensor representation theorem is employed to give the complete irreducible invariants and integrity basis.An adaptive regularization term is employed to enhance the representation performance.For the coupling issue,an iterative coupling framework with consistent convergence is proposed and then applied to a canonical separated flow.The results have high consistency with the direct numerical simulation true values,which proves the validity of the current approach.
基金supported by the National Natural Science Foundation of China (10872192)
文摘With the two-scale expansion technique proposed by Yoshizawa,the turbulent fluctuating field is expanded around the isotropic field.At a low-order two-scale expansion,applying the mode coupling approximation in the Yakhot-Orszag renormalization group method to analyze the fluctuating field,the Reynolds-average terms in the Reynolds stress transport equation,such as the convective term,the pressure-gradient-velocity correlation term and the dissipation term,are modeled.Two numerical examples：turbulent flow past a backward-facing step and the fully developed flow in a rotating channel,are presented for testing the efficiency of the proposed second-order model.For these two numerical examples,the proposed model performs as well as the Gibson-Launder （GL） model,giving better prediction than the standard k-ε model,especially in the abilities to calculate the secondary flow in the backward-facing step flow and to capture the asymmetric turbulent structure caused by frame rotation.
文摘A Reynolds stress closure based on the generalized Langevin model (GLM), developed by Haworth and Pope, is applied to the flow calculation with swirl-induced recirculation. The purpose of the work is to assess the performance of this model under the complex flow conditions caused by the presence of strong swirl which gives rise to both unconventional recirculation in the vicinity of the symmetry axis and strong anisotropy in the turbulence field. Comparison of the computational results are made both with the experimental data of Roback and Johnson and the computational results obtained with the typical isotropization of production model (IPM) and the k-∈ type Boussinesq viscosity model.
文摘Most current computations of trubulent flows with second-moment closure adopt the diffusion mo- dels which neglect the effect of pressure-velocity correlation.ln the present paper the importance of this correlation effect is elucidated the neglect of this effect accounts for some major defects in the wide application of the se- cond-moment closures.Through the relation between and ,established by Lumley,we propose here a new turbulence diffusion model which takes into consideration the pressure effect.Applications of this new model in the computation of shearless turbulence mixing layer and plane-and round-jet flows show that the spreading rate of these flows can be satisfactorily captured.
文摘Many industries in the world take part in the pollution of the environment. This pollution often comes from the reactions of combustion. To optimize these reactions and to minimize pollution, turbulence is a funda- mental tool. Several factors are at the origin of turbulence in the complex flows, among these factors, we can quote the effect of wings in the rotating flows. The interest of this work is to model and to simulate numeri- cally the effect of wings on the level of turbulence in the flow between two contra-rotating cylinders. We have fixed on these two cylinders eight wings uniformly distributed and we have varied the height of the wings to have six values from 2 mm to 20 mm by maintaining the same Reynolds number of rotation. The numerical tool is based on a statistical model in a point using the closing of the second order of the transport equations of the Reynolds stresses (Reynolds Stress Model: RSM). We have modelled wings effect on the flow by a source term added to the equation tangential speed. The results of the numerical simulation showed that all the average and fluctuating variables are affected the value of the kinetic energy of turbulence as those of Reynolds stresses increase with the height of the wings.
基金Foundation item： Supported by the National Natural Science Foundation of China （Nos.51309040, 51379033, 51209027, 51309025）, Open Research Fund of State Key Laboratory of Ocean Engineering （Shanghai Jiao Tong University） （Grant No.1402）, and Fundamental Research Fund for the Central Universities （DMU3132015089）.
文摘We investigate the role of extended intrinsic mean spin tensor introduced in this work for turbulence modelling in a non-inertial frame of reference. It is described by the Euclidean group of transformations and, in particular, its significance and importance in the approach of the algebraic Reynolds stress modelling, such as in a nonlinear K-ε model. To this end and for illustration of the effect of extended intrinsic spin tensor on turbulence modelling, we examine several recently developed nonlinear K-ε models and compare their performance in predicting the homogeneous turbulent shear flow in a rotating frame of reference with LES data. Our results and analysis indicate that, only if the deficiencies of these models and the like be well understood and properly corrected, may in the near future, more sophisticated nonlinear K-ε models be developed to better predict complex turbulent flows in a non-inertial frame of reference.
文摘It is assumed in this paper that for a high Reynolds number nearly homogeneouswind flow, the Reynolds stresses are uniquely related to the mean velocity gradientsand the two independent turbulent scaling parameters k and E. By applying dimensionalanalysis and owing to the Cayley-Hamilton theorem for tensors, a new turbulenceenclosure model so-called the axtended k-ε model has been developed. The coefficientsof the model expression were detemined by the wind tunnel experimental data ofhomogeneous shear turbulent flow. The model was compared with the standard k-εmodel in in composition and the prediction of the Reynold's normal Stresses. Using thenew model the numerical simulation of wind flow around a square cross-section tallbuilding was performed. The results show that the extended k-ε model improves theprediction of wind velocities around the building the building and wind pressures on the buildingenvelope.
文摘The aim of this study is to evaluate a three-equation turbulence model applied to pipe flow. Uncertainty is approximated by comparing with published direct numerical simulation results for fully-developed average pipe flow. The model is based on the Reynolds averaged Navier-Stokes equations. Boussinesq hypothesis is invoked for determining the Reynolds stresses. Three local length scales are solved, based on which the eddy viscosity is calculated. There are two parameters in the model;one accounts for surface roughness and the other is possibly attributed to the fluid. Error in the mean axial velocity and Reynolds stress is found to be negligible.
文摘Recently,the methodology of deep learning is used to improve the calculation accuracy of the Reynolds-averaged Navier-Stokes (RANS) model.In this paper,a neural network is designed to predict the Reynolds stress of a channel flow of different Reynolds numbers.The rationality and the high efficiency of the neural network is validated by comparing with the results of the direct numerical simulation (DNS),the large eddy simulation (LES),and the deep neural network (DNN) of other studies.To further enhance the prediction accuracy,three methods are developed by using several algorithms and simplified models in the neural network.In the method 1.the regularization is introduced and it is found that the oscillation and the overfitting of the results are eflectively prevented.In the method 2,y^+ is embedded in the input variable while the combination of the invariants is simplified in the method 3.From the predicted results,it can be seen that by using the first two methods,the errors are reduced.Moreover,the method 3 shows considerable advantages in the DNS trend and the smoothness of a curve.Consequently,it is concluded that the DNNs can predict effectively the anisotropic Reynolds stress and is a promising technique of the computational fluid dynamics.
基金The authors wish to express their gratitude to Prof.Zhou Heng for detailed and extremely helpful comments on a draft of this paper.This work was supported by the Climbing Program and the National Science Foundation of China(Grant No.59476017)
文摘A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation based on the theoretical model. The mean velocity profile is also computed by using the same theoretical model. The theoretical results are in good agreement with those found from DNS, indicating that the theoretical model proposed can correctly describe the physical mechanism of turbulence in near wail region and it thus possibly opens a new way for turbulence modeling in this region.
基金support from the Major State Basic Research Development Program of China(973 Program,Grant No.2005CB221205)。
文摘The Speziale,Sarkar and Gatski Reynolds Stress Model(SSG RSM)is utilized to simulate the fluid dynamics in a full baffled stirred tank with a Rushton turbine impeller.Four levels of grid resolutions are chosen to determine an optimised number of grids for further simulations.CFD model data in terms of the flow field,trailing vortex,and the power number are compared with published experimental results.The comparison shows that the global fluid dynamics throughout the stirred tank and the local characteristics of trailing vortices near the blade tips can be captured by the SSG RSM.The predicted mean velocity components in axial,radial and tangential direction are also in good agreement with experiment data.The power number predicted is quite close to the designed value,which demonstrates that this model can accurately calculate the power number in the stirred tank.Therefore,the simulation by using a combination of SSG RSM and MRF impeller rotational model can accurately model turbulent fluid flow in the stirred tank,and it offers an alternative method for design and optimisation of stirred tanks.
