Analysis of Mobile and Internet Network Coverage: Propagation of Electromagnetic Waves and Concept of Digital Divide in Burundi

Mobile and Internet network coverage plays an important role in digital transformation and the exploitation of new services. The evolution of mobile networks from the first generation (1G) to the 5th generation is still a long process. 2G networks have developed the messaging service, which complements the already operational voice service. 2G technology has rapidly progressed to the third generation (3G), incorporating multimedia data transmission techniques. It then progressed to fourth generation (4G) and LTE (Long Term Evolution), increasing the transmission speed to improve 3G. Currently, developed countries have already moved to 5G. In developing countries, including Burundi, a member of the East African Community (ECA) where more than 80% are connected to 2G technologies, 40% are connected to the 3G network and 25% to the 4G network and are not yet connected to the 5G network and then still a process. The objective of this article is to analyze the coverage of 2G, 3G and 4G networks in Burundi. This analysis will make it possible to identify possible deficits in order to reduce the digital divide between connected urban areas and remote rural areas. Furthermore, this analysis will draw the attention of decision-makers to the need to deploy networks and coverage to allow the population to access mobile and Internet services and thus enable the digitalization of the population. Finally, this article shows the level of coverage, the digital divide and an overview of the deployment of base stations (BTS) throughout the country to promote the transformation and digital inclusion of services.

基于Dividing Rectangles的多模态医学图像配准算法

为了准确、可靠地配准多模态医学图像,提出了一种基于互信息的全局优化配准算法。该算法首先提取出目标物体的外轮廓面,再用迭代最近点方法初步对齐图像;然后用确定性的全局优化方法—Dividing Rectangles搜索归一化互信息的全局最优解。该算法利用图像的特征信息,为Dividing Rectangles方法提供了一个较好的初始配准位置,并充分利用了Dividing Rectangles方法在小范围内的高效搜索能力。实验结果表明,对于3维人体脑部数据,该算法配准精度高、速度快,而且有效地避免了配准过程中出现的局部极值。

Dividing Cubes算法生成的物体表面的法向量方向的光顺操作

在用 Dividing Cubes算法提取的边界体素所构造的物体表面上 ,可能会存在法向量方向突变 ,使得物体表面光照图显示粗糙 .文中提出了一种改进的邻域加权平均法 ,对物体表面的法向量方向进行光顺处理 ,光顺操作只在相关边界体素间进行 ,并且对有多个等值面交汇的边界体素将不进行光顺操作 ,以避免模糊位于多个区域处的边界和保持物体表面光照图的细节 .为避免在屏幕上产生孔洞 ,用光线投射法显示物体表面 .文中所采用的光顺操作可以消除物体表面的法向量方向突变 ,使物体表面光照图光滑细腻 .最后 ,给出一个医学图像的测试实例 .

Dividing cubes算法在数控仿真中的应用

切削计算是数控仿真系统中的重要组成部分,不同的切削算法直接影响切削效率与切削精度。基于剖分立方体(dividing cubes)算法思想,对体素模型稍作改动,提出了一种新的切削算法。仿真结果表明,基于改进算法的切削面的重绘过程更加简洁,在保证切削精度的同时能有更高的切削效率。但是,由于算法根据毛坯的离散精度的不同,所需要的内存空间也不同,当毛坯的离散精度超过一定程度时,会增加切削计算的计算量,反而降低了切削计算的效率。

改进的Dividing Cubes算法及其并行实现

体绘制是三维数据场可视化的有力工具，而并行处理则是最有希望使其达到交互式显示速度的途径．本文首先提出一种DividingCubes算法的改进方案，以节省该算法的执行时间和空间．更为重要的是，改进后的算法在不同视线方向下的绘制时间的差别大为减少，这对于在实时状态下匀速显示一连串视角微小变化的三维数据场非常重要．在此基础上，本文给出该算法的基于分布式内存的MIMD结构的并行实现方案．高效的静态数据分解策略使并行算法在绘制阶段的负载平衡度很高，而通信量很小．实验结果表明，我们的并行算法可以在配备9个处理器的PA’95加速器上，以每秒两帧以上的速度交互显示大小为128×128×197的数据场．

The Art of Power Dividing:A Review for State-of-the-Art Planar Power Dividers

In this paper,massive state-of-theart planar power dividers are presented and discussed. The innovations of these superiorly-performanced power dividers lie in the performance breakthrough,physical configurations and function integrations. Eventually,based on the trend presented,the future of the power dividers is predicted. This paper might have inspiration significance to illuminate the way for the development of power dividers.

Simulation Optimization and Experimental Study of Cross-Wall Adiabatic Dividing Wall Column Used to Separate Hexane-Heptane-Octane System

Through separation of the hexane-heptane–octane system in a cross-wall adiabatic dividing wall column, the effects of feed position, side-draw position, liquid split ratio, vapor split ratio and their interactions on the energy consumption were analyzed by Aspen Plus under the constant product purity, and the response surface model for the energy consumption was regressed. Based on the restriction on the optimal operating zone, the comparison of different combinations of surrogate models and optimization methods showed that, the combination of the Kriging model and multi-island genetic algorithm(Kriging-MIGA) had better prediction ability than the combination of the response surface model and partial derivative method(RSM-PD), and RSM-PD had better optimization effect than Kriging-MIGA. With a self-made cross-wall adiabatic dividing wall column, the temperature at measuring points and the energy consumption were measured during experiments, the comparison between measured values and simulated ones demonstrated that the optimized values of variables searched by RSM-PD and Kriging-MIGA could be both used as the optimum technological conditions since the experimental reliability was ensured, with the optimum technological conditions shown below: The feed position is 6, the side-draw position is 7, the combinations of liquid split ratio and vapor split ratio are [0.14, 0.5] and [0.16, 0.52], respectively. RSM-PD and Kriging-MIGA can provide the appropriate optimization methods for the dividing wall column.

A novel kind of multiple steady states characteristics in the dividing wall column

In this article, one kind of multiple steady states(MSS) phenomenon was investigated for a dividing wall column(DWC). The four-section model constructed in Aspen Plus was employed to simulate two DWC cases: mixture of n-hexane, n-heptane and n-octane;system of methanol, ethanol and n-propanol. It can be seen that there is a range of vapor split ratio in which multiple solutions of reflux ratio exist for fixed DWC configuration with the same feed and product streams. The width and the curve shapes of the MSS region, and the number of solutions change with the liquid split ratio. This MSS phenomenon was further explained using the component recovery around the prefractionator and the component recycling flow inside the DWC. This MSS phenomenon is helpful for DWC design by knowing the probable existence of multiple solutions in advance.

Optimization of Dividing Wall Column with Heat Transfer Process Across the Wall for Feed Properties Variation

This paper investigates the thermal-coupled effect across the wall and the optimal heat transfer region of the wall for enhancing the energy saving effect of dividing wall column (DWC), and also studies the effects of feed thermal condition (q) and middle component composition of feed (cB) on the heat transfer process, the optimal heat transfer region, and the maximum heat transfer quantity across the wall. The simulation results show that the maximum heat transfer quantity across the wall and the potential for energy saving increase with the increase of q, while with the limitation of temperature difference across the wall, the beneficial heat transfer effect between certain range of stages, which are involved in the optimal heat transfer region, cannot be realized completely for a specific value of q. Besides, compared with q, a changing cB does not change the degree of realizing the beneficial heat transfer effect, but can bring about the variation of liquid split ratio (RL) and vapor split ratio (Rv). Thus, for achieving a maximum energy-saving effect of DWC, different q and cB need to find its own corresponding suitable heat transfer process across the wall.

Infinitesimal dividing modeling method for dual suppliers inventory model with random lead times

As one of the basic inventory cost models, the （Q, τ）inventory cost model of dual suppliers with random procurement lead time is mostly formulated by using the concepts of ＂effective lead time＂ and ＂lead time demand＂, which may lead to an imprecise inventory cost. Through the real-time statistic of the inventory quantities, this paper considers the precise （Q, τ） inventory cost model of dual supplier procurement by using an infinitesimal dividing method. The traditional modeling method of the inventory cost for dual supplier procurement includes complex procedures. To reduce the complexity effectively, the presented method investigates the statistics properties in real-time of the inventory quantities with the application of the infinitesimal dividing method. It is proved that the optimal holding and shortage costs of dual supplier procurement are less than those of single supplier procurement respectively. With the assumption that both suppliers have the same distribution of lead times, the convexity of the cost function per unit time is proved. So the optimal solution can be easily obtained by applying the classical convex optimization methods. The numerical examples are given to verify the main conclusions.

Stability of the Dividing Distribution Function Method for ParticleSize Distribution Analysis in Small Angle X－Ray Scattering

The Dividing Distribution Function (DDF) method is one of the methods by which the particle size distribution of ultrafine powder can be evaluated from its small angle X-ray scattering data. In this paper, the stability of the solution obtained from DDF method has been investigated through optimizing the coefficient matrix, introducing a damping factor and a least square treatment. All calculations were accomplished with a microcomputer. It was shown that the average deviations of the size distribution obtained are not larger than the assigned random errors to the scattering intensities as long as the corresponding requirements are satisfied.

Shortcut Method of Design and Energy-Saving Analysis of Sargent Dividing Wall Column

The Sargent dividing wall column can implement four products separation sequences in one column based on Fully Thermally Coupled Distillation Column. The initial design parameters are required for the design optimization or dynamic control of the Sargent dividing wall column, and in order to make the rigorous simulation of the Sargent dividing wall column more conducive to convergence, a ten column model for complex Sargent column is established in this paper,and the shortcut design method of this model is proposed. The internal minimum vapor and liquid flow are obtained by the Underwood equations and the mass balance method and the V-min method. The separation for a 4-component shortcut mixture of pentane, hexane, heptane and octane was considered, while the initial values of design parameters and the ratio of vapor-liquid distribution of each column were calculated by using the shortcut design method of a ten column model. And by comparing the shortcut calculations with rigorous simulation results, the practicality and reliability of shortcut calculations were verified. The reason for energy saving was analyzed based on back-mixing. A virtual heat exchanger is proposed to make the Sargent dividing wall column more energy efficient.

Simulated annealing-based optimal design of energy efficient ternary extractive dividing wall distillation process for separating benzene-isopropanol-water mixtures

This article investigates the performances of different extractive distillation processes intensified with dividing-wall column for separating benzene-isopropanol-water ternary mixtures.All the processes with ethylene glycol as solvent are optimized with the minimal total annual cost(TAC)as target.In order to get the global optimal solution intelligently,an improved simulated annealing algorithm is adopted,which is programmed in MATLAB and linked to Aspen Plus.The results show that the extractive dividing wall column-solvent(EDWC-S)process consisting of an extractive dividing wall column and a solvent recovery column is the best scheme.It can reduce the TAC by 28.65%and CO_(2) emissions by 32.84% compared to the conventional triple-column extractive distillation process.

Reactive dividing wall column for hydrolysis of methyl acetate:Design and control

Reactive distillation and dividing wall column distillation are two kinds of effective separation technologies,and their integrated configuration,reactive dividing wall column(RDWC),presents attractive advantages.In this study,the rigorous simulation of RDWC for methyl acetate hydrolysis is performed,and sensitivity analysis is conducted to obtain the minimum reboiler duty.Then a comparison is made between the conventional process and RDWC process,and it shows that 20.1% energy savings can be achieved by RDWC process.In addition,the dynamic characteristic of RDWC is studied and an effective control strategy is proposed.The simple PI control scheme with three temperature loops can obtain reasonable control performance and maintain products at desired purities.It is proved that this RDWC process is an energy efficiency alternative with good controllability.

Control of reactive dividing wall column for selective hydrogenation and separation of C3 stream

In our previous work, the reactive dividing wall column(RDWC) was proposed and proved to be effective for selective hydrogenation and separation of C3 stream. In the present paper, the dynamics and control of the proposed RDWC are investigated. Four control structures including composition and temperature controls are proposed. The feed forward controllers are employed in the four control strategies to shorten the dynamic response time, reduce the maximum deviations and offer an immediate adjustment. The control structures are compared by applying them into the RDWC system with 20% disturbances in both the feed flow rate and the feed compositions, and the results are discussed.

Fast image retargeting based on strip dividing and resizing

Based on image strip dividing, an effective and fast image retargeting algorithm is proposed for resizing images. First,we construct the image energy map using gradient magnitude of the pixels and calculate the accumulated energy of each column,dividing the image into several strips by integrating similar energy columns. The reduced amount of dimension is decided in inverse proportion to the average energy for each strip. Then we retarget the image combining scaling with cropping in terms of each strip＇s reduced ratio. Experiment results show that the proposed algorithm is capable of implementing fast image retargeting and preserving both the local structures and the global visual effect of the image.

Experimental and simulation of the reactive dividing wall column based on ethyl acetate synthesis

Reactive dividing wall column(RDWC) is a highly integrated unit which combines reaction distillation(RD) with dividing wall column separation technology into one shell, and it realized the chemical reaction and the separation of multiple product fractions simultaneously. In this paper, the reaction of esterification with acetic acid and ethanol to produce ethyl acetate was used as the research system, experiments and simulations of the RDWC were carried out. This system in the traditional process mostly used the homogeneous catalyst(e.g. sulfuric acid). However, in view of the corrosion of the equipment caused by the acidity of the catalyst, we used the heterogeneous catalysts – iron exchange resins – Amberlyst15 and proposed a novel catalyst loading method. Firstly,the reliability of the model of the simulation was verified by the experimental study on the change of liquid split ratio and reflux ratio. After that, the four-column model was established in Aspen Plus to analyze the effects of the amount of azeotropic agent, reflux ratio and acetic acid concentration. Finally, for a fair comparison, the economic analysis was conducted between traditional RD column and RDWC. The results showed that RDWC can save34.7% of total operating costs and 18.5% of TAC.

FLOOD ROUTING MODELS IN CONFLUENT AND DIVIDING CHANNELS

By introducing a water depth connecting formula, the hydraulic equations in the dividing channel system were coupled and the relation of discharge distribution between the branches of the dividing channels can be yielded. In this manner, a numerical model for the confluent channels was established to study the variation of backwater effects with the parameters in the channel junction. The meeting of flood peaks in the mainstream and tributary can be analyzed with this model.The flood peak meeting is found to be a major factor for the extremely high water level in the mainstream during the 1998 Yangtze River flood. Subsequently the variations of discharge distribution and water level with channel parameters between each branch in this system were studied as well. As a result, flood evolution caused by Jingjiang River shortcut and sediment deposition in the entrance of dividing channels of the Yangtze River may be qualitatively elucidated.It is suggested to be an effective measure for flood mitigation to enhance regulation capability of reservoirs available upstream of the tributaries and harness branch entrance channels.

New judging model of fuzzy cluster optimal dividing based on rough sets theory

To investigate the judging problem of optimal dividing matrix among several fuzzy dividing matrices in fuzzy dividing space, correspondingly, which is determined by the various choices of cluster samples in the totality sample space, two algorithms are proposed on the basis of the data analysis method in rough sets theory： information system discrete algorithm （algorithm 1） and samples representatives judging algorithm （algorithm 2）. On the principle of the farthest distance, algorithm 1 transforms continuous data into discrete form which could be transacted by rough sets theory. Taking the approximate precision as a criterion, algorithm 2 chooses the sample space with a good representative. Hence, the clustering sample set in inducing and computing optimal dividing matrix can be achieved. Several theorems are proposed to provide strict theoretic foundations for the execution of the algorithm model. An applied example based on the new algorithm model is given, whose result verifies the feasibility of this new algorithm model.

FLOW CHARACTERISTICS IN DIVIDING FLOW MANIFOLDS

ＦＬＯＷＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＩＮＤＩＶＩＤＩＮＧＦＬＯＷＭＡＮＩＦＯＬＤＳＷａｎｇＪｕｎｙｅ（王峻晔）（Ｄｅｐｔ．ｏｆＥｎｅｒｇｙＥｎｇｉｎｅｅｒｉｎｇ，ＳｈａｎｇｈａｉＪｉａｏｔｏｎｇＵｎｉｖ．，Ｓｈａｎｇｈａｉ，Ｃｈｉｎａ）ＷｕＤｏｎｇ...