3D Road Network Modeling and Road Structure Recognition in Internet of Vehicles

Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.

Numerical Prediction of Ride Comfort of Tracked Vehicle Equipped with Novel Flexible Road Wheels

Enhancing ride comfort has always constituted a crucial focus in the design and research of modern tracked vehicles,heavily reliant on the driving system's performance.While the road wheel is a key component of the driving system,traditional road wheels predominantly adopt a solid structure,exhibiting subpar adhesion performance and damping effects,thereby falling short of meeting the demands for high-speed,stable,and long-distance driving in tracked vehicles.Addressing this issue,this paper proposes a novel type of flexible road wheel(FRW)characterized by a catenary construction.The study investigates the ride comfort of tracked vehicles equipped with flexible road wheels by integrating finite element and vehicle dynamic.First,three-dimensional(3D)finite element(FE)models of both flexible and rigid road wheels are established,considering material and contact nonlinearities.These models are validated through a wheel radial loading test.Based on the validated FE model,the paper uncovers the relationship between load and radial deformation of the road wheel,forming the basis for a nonlinear mathematical model.Subsequently,a half-car model of a tracked vehicle with seven degrees of freedom is established using Newton's second law.A random road model,considering the track effect and employing white noise,is constructed.The study concludes by examining the ride comfort of tracked vehicles equipped with flexible and rigid road wheels under various speeds and road grades.The results demonstrate that,in comparison to the rigid road wheel(RRW),the flexible road wheel enhances the ride comfort of tracked vehicles on randomly uneven roads.This research provides a theoretical foundation for the implementation of flexible road wheels in tracked vehicles.

Intelligent extraction of road cracks based on vehicle laser point cloud and panoramic sequence images

In light of the limited efficacy of conventional methods for identifying pavement cracks and the absence of comprehensive depth and location data in two-dimensional photographs,this study presents an intelligent strategy for extracting road cracks.This methodology involves the integration of laser point cloud data obtained from a vehicle-mounted system and a panoramic sequence of images.The study employs a vehicle-mounted LiDAR measurement system to acquire laser point cloud and panoramic sequence image data simultaneously.A convolutional neural network is utilized to extract cracks from the panoramic sequence image.The extracted sequence image is then aligned with the laser point cloud,enabling the assignment of RGB information to the vehicle-mounted three dimensional(3D)point cloud and location information to the two dimensional(2D)panoramic image.Additionally,a threshold value is set based on the crack elevation change to extract the aligned roadway point cloud.The three-dimensional data pertaining to the cracks can be acquired.The experimental findings demonstrate that the use of convolutional neural networks has yielded noteworthy outcomes in the extraction of road cracks.The utilization of point cloud and image alignment techniques enables the extraction of precise location data pertaining to road cracks.This approach exhibits superior accuracy when compared to conventional methods.Moreover,it facilitates rapid and accurate identification and localization of road cracks,thereby playing a crucial role in ensuring road maintenance and traffic safety.Consequently,this technique finds extensive application in the domains of intelligent transportation and urbanization development.The technology exhibits significant promise for use in the domains of intelligent transportation and city development.

Mathematical Models of Tire-Longitudinal Road Adhesion and Their Use in the Study of Road Vehicle Dynamics

Mathematical models of tire-longitudinal road adhesion for use in the study of road vehicle dynamics are set up so as to express the relations of longitudinal adhesion coefficients with the slip ratio. They perfect the Pacejka's models in practical use by taking into account the influences of all essential parameters such as road surface condition. vehicle velocity. slip angle. vertical load and slip ratio on the longitudinal adhesion coefficients. The new models are more comprehensive more concise. simpler and more convenient in application in all kinds of simulations of car dynamics in various sorts of braking modes.

Approach to estimation of vehicle-road longitudinal friction coefficient

According to the road adaptive requirements for the vehicle longitudinal safety assistant system an estimation method of the road longitudinal friction coefficient is proposed.The method can simultaneously be applied to both the high and the low slip ratio conditions. Based on the simplified magic formula tire model the road longitudinal friction coefficient is preliminarily estimated by the recursive least squares method.The estimated friction coefficient and the tires model parameters are considered as extended states. The extended Kalman filter algorithm is employed to filter out the noise and adaptively adjust the tire model parameters. Then the final road longitudinal friction coefficient is accurately and robustly estimated. The Carsim simulation results show that the proposed method is better than the conventional algorithm. The road longitudinal friction coefficient can be quickly and accurately estimated under both the high and the low slip ratio conditions.The error is less than 0.1 and the response time is less than 2 s which meets the requirements of the vehicle longitudinal safety assistant system.

Mathematical Models of Tire-Lateral Road Adhesion for Use in Road Vehicle Dynamics Studies

Mathematical models of tire-lateral mad adhesion for use in mad vehicle dynamics studies are set up to express the relations of adhesion coefficients with slip ratio in lateral direction.The models of tire-lateral mad adhesion revolutionize the Pacejka's model in concept and therefore make it possible for applications in vehicle dynamics studies by the expression of lateral adhesion coefficient as a function of wheel slip ratio,instead of the wheel slip angle,taking into account in the mean time the influences of mad surface condition, vehicle velocity,vertical load,tire slip angle,and wheel camber angle.

Dual Extended Kalman Filter for Combined Estimation of Vehicle State and Road Friction

Vehicle state and tire-road adhesion are of great use and importance to vehicle active safety control systems. However, it is always not easy to obtain the information with high accuracy and low expense. Recently, many estimation methods have been put forward to solve such problems, in which Kalman filter becomes one of the most popular techniques. Nevertheless, the use of complicated model always leads to poor real-time estimation while the role of road friction coefficient is often ignored. For the purpose of enhancing the real time performance of the algorithm and pursuing precise estimation of vehicle states, a model-based estimator is proposed to conduct combined estimation of vehicle states and road friction coefficients. The estimator is designed based on a three-DOF vehicle model coupled with the Highway Safety Research Institute（HSRI） tire model; the dual extended Kalman filter （DEKF） technique is employed, which can be regarded as two extended Kalman filters operating and communicating simultaneously. Effectiveness of the estimation is firstly examined by comparing the outputs of the estimator with the responses of the vehicle model in CarSim under three typical road adhesion conditions（high-friction, low-friction, and joint-friction）. On this basis, driving simulator experiments are carried out to further investigate the practical application of the estimator. Numerical results from CarSim and driving simulator both demonstrate that the estimator designed is capable of estimating the vehicle states and road friction coefficient with reasonable accuracy. The DEKF-based estimator proposed provides the essential information for the vehicle active control system with low expense and decent precision, and offers the possibility of real car application in future.

Torque Distribution of Electric Vehicle with Four In-Wheel Motors Based on Road Adhesion Margin

With the worsening of energy crisis and environmental pollution,electric vehicles with four in?wheel motors have been paid more and more attention. The main research subject is how to reasonably distribute the driving torque of each wheel. Considering the longitudinal motion,lateral motion,yaw movement and rotation of the four wheels,the tire model and the seven DOF dynamic model of the vehicle are established in this paper. Then,the torque distribution method is proposed based on road adhesion margin,which can be divided into anti ? slip control layer and torque distribution layer. The anti?slip control layer is built based on sliding mode variable structure control,whose main function is to avoid the excessive slip of wheels caused by road conditions. The torque distribution layer is responsible for selecting the torque distribution method based on road adhesion margin. The simulation results show that the proposed torque distribution method can ensure the vehicle quickly adapt to current road adhesion conditions,and improve the handling stability and dynamic performance of the vehicle in the driving process.

Dynamic Characteristics of Tracked Vehicle Power Train Considering Road Random Torsional Excitation

The road random torsional excitation is one type of torque rooted from the road roughness and vehicle drive system. This paper aims to study how the road random torsional excitation affects the dynamic characteristics of vehicle power train. The method of simulating the random torsional excitation of tracked vehicle is explored at first. Secondly,the road random torsional excitations under different road roughness,vehicle speeds and pre-tensions are obtained. Thirdly,the dynamic analysis model of tracked vehicle power train is constructed with the consideration of the road random torsional excitation. Eventually,the influences of this excitation on output torque,bearing support force,vibration acceleration and dynamic shear stress of transmission shafts are intensively studied.The research conclusions are helpful to correct and refine the present virtual prototype of tracked vehicle power train.

A Spatio-temporal Data Model for Road Network in Data Center Based on Incremental Updating in Vehicle Navigation System

The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation system is in charge of storing incremental data,and the spatio-temporal data model for storing incremental data does affect the efficiency of the response of the data center to the requirements of incremental data from the vehicle terminal.According to the analysis on the shortcomings of several typical spatio-temporal data models used in the data center and based on the base map with overlay model,the reverse map with overlay model (RMOM) was put forward for the data center to make rapid response to incremental data request.RMOM supports the data center to store not only the current complete road network data,but also the overlays of incremental data from the time when each road network changed to the current moment.Moreover,the storage mechanism and index structure of the incremental data were designed,and the implementation algorithm of RMOM was developed.Taking navigational road network in Guangzhou City as an example,the simulation test was conducted to validate the efficiency of RMOM.Results show that the navigation database in the data center can response to the requirements of incremental data by only one query with RMOM,and costs less time.Compared with the base map with overlay model,the data center does not need to temporarily overlay incremental data with RMOM,so time-consuming of response is significantly reduced.RMOM greatly improves the efficiency of response and provides strong support for the real-time situation of navigational road network.

A Novel Braking Control Strategy for Hybrid Electric Buses Based on Vehicle Mass and Road Slope Estimation

Proper braking force distribution strategies can improve both stability and economy performance of hybrid electric vehicles,which is prominently proved by many studies.To achieve better dynamic stable performance and higher energy recovery efficiency,an effective braking control strategy for hybrid electric buses(HEB)based on vehicle mass and road slope estimation is proposed in this paper.Firstly,the road slope and the vehicle mass are estimated by a hybrid algorithm of extended Kalman filter(EKF)and recursive least square(RLS).Secondly,the total braking torque of HEB is calculated by the sliding mode controller(SMC),which uses the information of brake intensity,whole vehicle mass,and road slope.Finally,comprehensively considering driver’s braking intention and regulations of the Economic Commission for Europe(ECE),the optimal proportional relationship between regenerative braking and pneumatic braking is obtained.Furthermore,related simulations and experiments are carried out on the hardware-in-the-loop test bench.Results show that the proposed strategy can effectively improve the braking performance and increase the recovered energy through precise control of the braking torque.

A Workable Solution for Reducing the Large Number of Vehicle and Pedestrian Accidents Occurring on a Yellow Light

Traffic intersections are incredibly dangerous for drivers and pedestrians. Statistics from both Canada and the U.S. show a high number of fatalities and serious injuries related to crashes at intersections. In Canada, during 2019, the National Collision Database shows that 28% of traffic fatalities and 42% of serious injuries occurred at intersections. Likewise, the U.S. National Highway Traffic Administration (NHTSA) found that about 40% of the estimated 5,811,000 accidents in the U.S. during the year studied were intersection-related crashes. In fact, a major survey by the car insurance industry found that nearly 85% of drivers could not identify the correct action to take when approaching a yellow traffic light at an intersection. One major reason for these accidents is the “yellow light dilemma,” the ambiguous situation where a driver should stop or proceed forward when unexpectedly faced with a yellow light. This situation is even further exacerbated by the tendency of aggressive drivers to inappropriately speed up on the yellow just to get through the traffic light. A survey of Canadian drivers conducted by the Traffic Injury Research Foundation found that 9% of drivers admitted to speeding up to get through a traffic light. Another reason for these accidents is the increased danger of making a left-hand turn on yellow. According to the National Highway Traffic Safety Association (NHTSA), left turns occur in approximately 22.2% of collisions—as opposed to just 1.2% for right turns. Moreover, a study by CNN found left turns are three times as likely to kill pedestrians than right turns. The reason left turns are so much more likely to cause an accident is because they take a driver against traffic and in the path of oncoming cars. Additionally, most of these left turns occur at the driver’s discretion—as opposed to the distressingly brief left-hand arrow at busy intersections. Drive Safe Now proposes a workable solution for reducing the number of accidents occurring during a yellow light at intersections. We believe this fairly simple solution will save lives, prevent injuries, reduce damage to public and private property, and decrease insurance costs.

Road boundary estimation to improve vehicle detection and tracking in UAV video

Video processing is one challenge in collecting vehicle trajectories from unmanned aerial vehicle(UAV) and road boundary estimation is one way to improve the video processing algorithms. However, current methods do not work well for low volume road, which is not well-marked and with noises such as vehicle tracks. A fusion-based method termed Dempster-Shafer-based road detection(DSRD) is proposed to address this issue. This method detects road boundary by combining multiple information sources using Dempster-Shafer theory(DST). In order to test the performance of the proposed method, two field experiments were conducted, one of which was on a highway partially covered by snow and another was on a dense traffic highway. The results show that DSRD is robust and accurate, whose detection rates are 100% and 99.8% compared with manual detection results. Then, DSRD is adopted to improve UAV video processing algorithm, and the vehicle detection and tracking rate are improved by 2.7% and 5.5%,respectively. Also, the computation time has decreased by 5% and 8.3% for two experiments, respectively.

General Torsional Stiffness Matching of Off-road Vehicle

Increasing frame torsional stiffness of off-road vehicle will lead to the decrease of body torsional deformation, but the increase of torsional loads of frame and suspension system and the decrease of wheel adhesive weight. In severe case, a certain wheel will be out of contact with road surface. Appropriate matching of body, frame and suspension torsional stiffnesses is a difficult problem for off-road vehicle design. In this paper, these theoretically analytic models of the entire vehicle, body, frame and suspension torsional stiffness are constructed based on the geometry and mechanism of a light off-road vehicle＇s body, frame and suspension. The body and frame torsional stiffnesses can be calculated by applying body CAE method, meanwhile the suspension＇s rolling angle stiffness can be obtained by the bench test of the suspension＇s elastic elements. Through fixing the entire vehicle, using sole timber to raise wheels to simulate the road impact on a certain wheel, the entire vehicle torsional stiffness can be calculated on the geometric relation and loads of testing. Finally some appropriate matching principles of the body, frame and suspension torsional stiffness are summarized according to the test and analysis results. The conclusion can reveal the significance of the suspension torsional stiffness on off-road vehicle＇s torsion-absorbing capability. The results could serve as a reference for the design of other off-road vehicles.

Road vehicle-induced vibration control of microelectronics facilities

A hybrid control platform is investigated in this paper to mitigate microvibrations to a group of vibration-sensitive equipment installed in a microelectronics facility subject to nearby road vehicle-induced horizontal and vertical ground motions. The hybrid control platform, on which microelectronics equipment is installed, is mounted on a building floor through a series of passive mounts and controlled by hydraulic actuators in both horizontal and vertical directions. The control platform is an elastic body with significant bending modes of vibration, and a sub-optimal control algorithm is used to manipulate the hydraulic actuators with actuator dynamics included. The finite element model and the equations of motion of the coupled platform-building system are then established in the absolute coordinate to facilitate the feedback control and performance evaluation of the platform. The horizontal and vertical ground vibrations at the base of the building induced by nearby moving road vehicles are assumed to be stationary random processes. A typical three-story microelectronics building is selected as a case study. The case study shows that the vertical vibration of the microelectronics building is higher than the horizontal. The use of a hybrid control platform can effectively reduce both horizontal and vertical microvibrations of the microelectronics equipment to the level which satisfies the stringent microscale velocity requirement specified in the Bolt Beranek & Newman (BBN) criteria.

Development of driver-vehicle-road closed-loop semi-physical simulation system

As hybrid vehicles introduced the motor, the vehicle structure has a significant change in the power matching. A driver-vehicle-road closed-loop semi-physical simulation system, which makes real driving parts together with the simulation car, will bring convenience to the new car design. We used the computer software to simulate the road with a slope, curve and some other features based on the actual road condition, and analyzed the whole road scene in addition to geometry and physical characteristics. Analyzing and constructing the vehicle dynamics basic template, appropriate changes to the template can obtain the desired vehicle dynamics model with an external device to control the model vehicle. It combined the physical operation system with visual display, which gave us real driving feelings and increased the vehicle design predictive accuracy.

Modeling continuous traffic flow with the average velocity effect of multiple vehicles ahead on gyroidal roads

In the future connected vehicle environment,the information of multiple vehicles ahead can be readily collected in real-time,such as the velocity or headway,which provides more opportunities for information exchange and cooperative control.Meanwhile,gyroidal roads are one of the fundamental road patterns prevalent in mountainous areas.To effectively control the system,it is therefore significant to explore the evolution mechanism of traffic flow on gyroidal roads under a connected vehicle environment.In this paper,we present a new continuum model with the average velocity of multiple vehicles ahead on gyroidal roads.The stability criterion and KdV-Burger equation are deduced via linear and nonlinear stability analysis,respectively.Solving the above KdV-Burger equation yields the density wave solution,which explores the formation and propagation property of traffic jams near the neutral stability curve.Simulation examples verify that the model can reproduce complex phenomena,such as shock waves and rarefaction waves.The analysis of the local cluster effect shows that the number of vehicles ahead and the radius information,and the slope information of gyroidal roads can exert a great influence on traffic jams.The effect of the first and second terms are positive,while the last term is negative.

Evaluation of vehicle damage involved in road crashes based on quantificated model

Based on economics theory,social value loss caused by vehicle involved in crashes as well as various factors influencing on it were analyzed,the corresponding mi- cro-econometrics model was theoretically given.Moreover,the practicability of the model, the veracity and rationality of quantification were analyzed.Based on probability theory and mathematical statistical theory,macro approach to evaluating vehicle damage in crashes was presented,and the corresponding macro-econometrics model was con- structed.In addition,the macro-econometrics model was utilized to assess economic loss from statistical data of vehicle damaged in crashes,which has shown that the model can meet the demand of quantification analysis of vehicle damage,and be applied to the evaluation of economic loss caused by crashes.The results in this paper will be of practic- al significance for scientific,comprehensive and rational evaluating socio-economic loss caused by road crashes.

Road User Charging for Urban Freight Vehicles: A Systems Approach

Road user charging (RUC) has a long history as a mechanism to recover infrastructure maintenance and capital costs. The present RUC systems are facing issues such as transparency, cross-subsidization, environmental concerns and reducing revenue due to the likes of lessening fuel tax as vehicles become more efficient. Therefore, this paper reviews the strengths and weaknesses of the present RUC mechanisms implemented in the world with respect to stakeholder problems and demands of the freight industry and to describe the need for a more appropriate, practical and sustainable approach that can be used in the future. Finally, a model is proposed that is transparent and considers usage-based charging addressing most of the weaknesses highlighted in the models reviewed. Further, it considers externalities produced by heavy vehicles into account. The model has the potential to provide answers to key stakeholder issues and will lead to a sustainable freight transport system in the future. Encouraging fuel-efficient modes, optimization of loading, routing and logistics systems, and long term land use planning are a few of them.

Survey of Controllable Suspension System for Off-road Vehicles

The controllable suspension system can improve the performances of off-road vehicles both on road and cross-country. So far, four controllable suspensions, that is, body height control, active, semi-active and slow-active suspensions, have been developed. For off-road vehicles, the slow-active suspension and the semi-active suspension which have controllable stiffness, damping and body height are more appropriate to use. For many years, some control methodologies for controllable suspension systems have been developed along with the development of modern control theory, and two or more original control methods are integrated as a new control method. Today, for military or civilian off-road vehicles, the R&D of controllable suspension systems is ongoing.