Design and Performance Analysis of HMDV Dynamic Inertial Suspension Based on Active Disturbance Rejection Control

This paper addresses the impact of vertical vibration negative effects,unbalanced radial forces generated by the static eccentricity of the hub motor,and road excitation on the suspension performance of Hub Motor Driven Vehicle(HMDV).A dynamic inertial suspension based on Active Disturbance Rejection Control(ADRC)is proposed,combining the vertical dynamic characteristics of dynamic inertial suspension with the features of ADRC,which distinguishes between internal and external disturbances and arranges the transition process.Firstly,a simulation model of the static eccentricity of the hub motor is established to simulate the unbalanced radial electromagnetic force generated under static eccentricity.A quarter-vehicle model of an HMDV with a controllable dynamic inertial suspension is then constructed.Subsequently,the passive suspension model is studied under different grades of road excitation,and the impact mechanism of suspension performance at speeds of 0–20 m/s is analyzed.Next,the three main components within the ADRC controller are designed for the second-order controlled system,and optimization algorithms are used to optimize its internal parameters.Finally,the performance of the traditional passive suspension,the PID-based controllable dynamic inertial suspension,and the ADRC-based controllable dynamic inertial suspension are analyzed under different road inputs.Simulation results show that,under sinusoidal road input,the ADRC-based controllable dynamic inertial suspension exhibits a 52.3%reduction in the low-frequency resonance peak in the vehicle body acceleration gain diagram compared to the traditional passive suspension,with significant performance optimization in the high-frequency range.Under random road input,the ADRC-based controllable dynamic inertial suspension achieves a 29.53%reduction in the root mean square value of vehicle body acceleration and a 14.87%reduction in dynamic tire load.This indicates that the designed controllable dynamic inertial suspension possesses excellent vibration isolation performance.

Dynamic Response of Functional Virtual Prototyping of Motorcycle under Combined Excitations

This paper developed 3D product models of motorcycle and engine by UGNX as well as virtual prototyping by ADAMS program with road roughness generated by MATLAB. Under the straight-line running condition, the dynamic responses of motorcycle multibody system to both road and engine excitations were compared with those to only road excitation in terms of vertical acceleration response, amplitude frequency response and power spectral density. The comparisons of simulation data showed that the response due to flat road excitation was around 20 Hz, while that to the combined excitations was in a wide frequency band, of which the major components focused on 10 Hz, 15 Hz, 35 Hz ,70 Hz, 100 Hz and even higher frequencies, reflecting the characteristics of engine excitation based on its unbalanced inertia force and torque. It is concluded that the high fidelity virtual prototyping can simulate the dynamics of motorcycle product well in investigating the vibration and ride comfort performance.

Dynamic Characteristics of Tracked Vehicle Power Train Considering Road Random Torsional Excitation

The road random torsional excitation is one type of torque rooted from the road roughness and vehicle drive system. This paper aims to study how the road random torsional excitation affects the dynamic characteristics of vehicle power train. The method of simulating the random torsional excitation of tracked vehicle is explored at first. Secondly,the road random torsional excitations under different road roughness,vehicle speeds and pre-tensions are obtained. Thirdly,the dynamic analysis model of tracked vehicle power train is constructed with the consideration of the road random torsional excitation. Eventually,the influences of this excitation on output torque,bearing support force,vibration acceleration and dynamic shear stress of transmission shafts are intensively studied.The research conclusions are helpful to correct and refine the present virtual prototype of tracked vehicle power train.

Adaptive robust feedback control of moving target tracking for all-Electrical tank with uncertainty

A moving target tracking control problem for marching tank based on adaptive robust feedback control scheme is addressed.A series of preparations is needed for tank gun before shooting a target,the purpose of this paper is to design a control system to fulfill two requirements in this process:the turretbarrel system of tank needs to be adjusted from off-target position to command position and point to the moving target stably when there are strong uncertainties(modeling error,uncertain disturbance with unknown boundaries and road excitation) in the system.Considering the characteristic of coupled interaction,the first thing we do in this paper is to build a coupled analysis model of turret-barrel system with uncertainty term in state-space form.Second,an adaptive robust feedback control scheme is proposed by adding adaptive law to overcome the uncertainty.Third,multi-body dynamics software is used to establish the mechanical mechanism of the tank,and DC-motor module is established in SIMULINK environment,thus the target information and tracking error of the control system is collected and transferred,the gear-ball screw is derived directly by the output torque of the DC-motor module.Finally,the control system and the 3D model are combined together by means of Recur Dyn/SIMULINK co-simulation,the turret-barrel system of tank can approximately track the moving target in a certain range.With the adaptive robust feedback control,the target action is completely followed when the target location is constantly changing.

Research on dynamics of a class of heavy vehicle-tire-road coupling system

The dynamic tire force of heavy vehicle is a primary reason for road damage. This paper presents a mathematic model to restore the interacting process of vehicle-tire-road system and tries to find out the mechanics of interaction. A nonlinear tri-axle vehicle model with IBS (integral balanced suspension) is firstly proposed based on the detailed analysis of structural features of a heavy vehicle (DFL1250). The results indicate that the nonlinearities in the vehicle suspension contribute to improvement of ride comfort and to the reduction of dynamic tire force. Furthermore, an FRC (flexible rolling contact) tire model with the enveloping characteristics is added into the IBS model. The tire model considers both the tire contact history with rough road profile and the uneven distribution characteristics of vertical load. The FRC model is able to remove medium and high vibration components from uneven road profile due to its filtering feature. It is expected that these results could supply a new idea for vehicle-road interaction research.