Travelling characteristics of road vehicles on single-level rail-cum-road bridge under the dynamic and aerodynamic impact of travelling trains

Aerodynamic and dynamic interference from trains is a key issue of concern for the safety of road vehicles travelling on single-level rail-cum road bridges.Based on the wind-road vehicle-train-bridge(WRTB)coupled vibration system developed herein,this study examines the dynamic characteristics when road vehicles meet trains in this situation.The influence of load combination,vehicle type and vehicle location is analyzed.A method to obtain the aerodynamic load of road vehicles encountering the train at an arbitrary wind speed is proposed.The results show that due to the windproof facilities and the large line distance between the railway and highway,the aerodynamic and dynamic influence of trains on road vehicles is slight,and the vibration of road vehicles depends on the road roughness.Among the road vehicles discussed,the bus is the easiest to rollover,and the truck-trailer is the easiest to sideslip.Compared with the aerodynamic impact of trains,the crosswind has a more significant influence on road vehicles.The first peak/valley value of aerodynamic loads determines the maximum dynamic response,and the quick method is optimized based on this conclusion.Test cases show that the optimized method can produce conservative results and can be used for relevant research or engineering applications.

3D Road Network Modeling and Road Structure Recognition in Internet of Vehicles

Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.

Connected and Autonomous Vehicles (CAVs) Challenges with Non-motorized Amenities Environments

With the deployment of Connected and Automated Vehicles in the coming decades,road transportation will experience a significant upheaval.CAVs(Connected and Autonomous Vehicles)have been a main emphasis of Transportation and the automotive sector,and the future of transportation system analysis is widely anticipated.The examination and future devel­opment of CAVs technology has been the subject of numerous researches.However,as three essential kinds of road users,pedestrians,bicyclists,and motorcyclists have experienced little to no handling.We explored the influ­ence of CAVs on non-motorized mobility in this article and seven various issues that CAVs face in the environment.

Intelligent extraction of road cracks based on vehicle laser point cloud and panoramic sequence images

In light of the limited efficacy of conventional methods for identifying pavement cracks and the absence of comprehensive depth and location data in two-dimensional photographs,this study presents an intelligent strategy for extracting road cracks.This methodology involves the integration of laser point cloud data obtained from a vehicle-mounted system and a panoramic sequence of images.The study employs a vehicle-mounted LiDAR measurement system to acquire laser point cloud and panoramic sequence image data simultaneously.A convolutional neural network is utilized to extract cracks from the panoramic sequence image.The extracted sequence image is then aligned with the laser point cloud,enabling the assignment of RGB information to the vehicle-mounted three dimensional(3D)point cloud and location information to the two dimensional(2D)panoramic image.Additionally,a threshold value is set based on the crack elevation change to extract the aligned roadway point cloud.The three-dimensional data pertaining to the cracks can be acquired.The experimental findings demonstrate that the use of convolutional neural networks has yielded noteworthy outcomes in the extraction of road cracks.The utilization of point cloud and image alignment techniques enables the extraction of precise location data pertaining to road cracks.This approach exhibits superior accuracy when compared to conventional methods.Moreover,it facilitates rapid and accurate identification and localization of road cracks,thereby playing a crucial role in ensuring road maintenance and traffic safety.Consequently,this technique finds extensive application in the domains of intelligent transportation and urbanization development.The technology exhibits significant promise for use in the domains of intelligent transportation and city development.

Numerical Prediction of Ride Comfort of Tracked Vehicle Equipped with Novel Flexible Road Wheels

Enhancing ride comfort has always constituted a crucial focus in the design and research of modern tracked vehicles,heavily reliant on the driving system's performance.While the road wheel is a key component of the driving system,traditional road wheels predominantly adopt a solid structure,exhibiting subpar adhesion performance and damping effects,thereby falling short of meeting the demands for high-speed,stable,and long-distance driving in tracked vehicles.Addressing this issue,this paper proposes a novel type of flexible road wheel(FRW)characterized by a catenary construction.The study investigates the ride comfort of tracked vehicles equipped with flexible road wheels by integrating finite element and vehicle dynamic.First,three-dimensional(3D)finite element(FE)models of both flexible and rigid road wheels are established,considering material and contact nonlinearities.These models are validated through a wheel radial loading test.Based on the validated FE model,the paper uncovers the relationship between load and radial deformation of the road wheel,forming the basis for a nonlinear mathematical model.Subsequently,a half-car model of a tracked vehicle with seven degrees of freedom is established using Newton's second law.A random road model,considering the track effect and employing white noise,is constructed.The study concludes by examining the ride comfort of tracked vehicles equipped with flexible and rigid road wheels under various speeds and road grades.The results demonstrate that,in comparison to the rigid road wheel(RRW),the flexible road wheel enhances the ride comfort of tracked vehicles on randomly uneven roads.This research provides a theoretical foundation for the implementation of flexible road wheels in tracked vehicles.

Factors Influence Hanoians’ Choice of Non-Motorized Transport Mode to Access Bus Stations

Hanoi’s rapid urbanization has led to a surge in private vehicle ownership, particularly motorcycles, amidst inadequate public transportation infrastructure. Despite government efforts, many still prefer motorized transport, citing mobility and safety concerns, exacerbated by insufficient pedestrian infrastructure. This study examines the motivations behind this reliance on motorized vehicles, particularly motorcycles, in Hanoi. Findings reveal safety and convenience as primary factors driving motorized transport use, especially for accessing bus stations. Economic incentives could promote non-motorized travel and public transport adoption. Policy implications highlight the importance of addressing economic factors and improving access infrastructure to manage motorized vehicle reliance and foster sustainable urban mobility in Hanoi.

Modeling continuous traffic flow with the average velocity effect of multiple vehicles ahead on gyroidal roads

In the future connected vehicle environment,the information of multiple vehicles ahead can be readily collected in real-time,such as the velocity or headway,which provides more opportunities for information exchange and cooperative control.Meanwhile,gyroidal roads are one of the fundamental road patterns prevalent in mountainous areas.To effectively control the system,it is therefore significant to explore the evolution mechanism of traffic flow on gyroidal roads under a connected vehicle environment.In this paper,we present a new continuum model with the average velocity of multiple vehicles ahead on gyroidal roads.The stability criterion and KdV-Burger equation are deduced via linear and nonlinear stability analysis,respectively.Solving the above KdV-Burger equation yields the density wave solution,which explores the formation and propagation property of traffic jams near the neutral stability curve.Simulation examples verify that the model can reproduce complex phenomena,such as shock waves and rarefaction waves.The analysis of the local cluster effect shows that the number of vehicles ahead and the radius information,and the slope information of gyroidal roads can exert a great influence on traffic jams.The effect of the first and second terms are positive,while the last term is negative.

Road User Charging for Urban Freight Vehicles: A Systems Approach

Road user charging (RUC) has a long history as a mechanism to recover infrastructure maintenance and capital costs. The present RUC systems are facing issues such as transparency, cross-subsidization, environmental concerns and reducing revenue due to the likes of lessening fuel tax as vehicles become more efficient. Therefore, this paper reviews the strengths and weaknesses of the present RUC mechanisms implemented in the world with respect to stakeholder problems and demands of the freight industry and to describe the need for a more appropriate, practical and sustainable approach that can be used in the future. Finally, a model is proposed that is transparent and considers usage-based charging addressing most of the weaknesses highlighted in the models reviewed. Further, it considers externalities produced by heavy vehicles into account. The model has the potential to provide answers to key stakeholder issues and will lead to a sustainable freight transport system in the future. Encouraging fuel-efficient modes, optimization of loading, routing and logistics systems, and long term land use planning are a few of them.

Investigation and Optimization of Priority for Non-motor Vehicles in the Old Urban Area of Nanchang

Under the background of"people-oriented"thought and"green transportation",the idea of"priority for non-motor vehicles"came into being,which can improve the riding environment of non-motor vehicle riders to a certain extent.According to the current situation of priority for non-motor vehicles in the old urban area of Nanchang,through field investigation,questionnaire investigation and interview,this study summarized the existing problems,and put forward optimization suggestions for these problems,in order to provide reference for areas with similar conditions.

Survey of Controllable Suspension System for Off-road Vehicles

The controllable suspension system can improve the performances of off-road vehicles both on road and cross-country. So far, four controllable suspensions, that is, body height control, active, semi-active and slow-active suspensions, have been developed. For off-road vehicles, the slow-active suspension and the semi-active suspension which have controllable stiffness, damping and body height are more appropriate to use. For many years, some control methodologies for controllable suspension systems have been developed along with the development of modern control theory, and two or more original control methods are integrated as a new control method. Today, for military or civilian off-road vehicles, the R&D of controllable suspension systems is ongoing.

Revision of the National Standard on Safety Specification for Power Driven Vehicles Operating on Roads

The national standard--Safety Specifications for Power Driven VehiclesOperating on Roads--is the most basic technical regulation for safety and technical management ofmotor vehicles in China. It is the safety and technical basis for the Public Security TrafficControl Dept. to register new vehicles, periodic inspection of vehicles under operation andinspection of vehicles involved in traffic accidents. It is also one of the important technicalbases of our country for compulsory inspection of new vehicles on fi-nalization of its model,ex-works inspection of new vehicles and the inspection of imported motor vehicles. Since the formalcountrywide implementation of GB7258-1997 Safety Specifications for Power Driven Vehicles Operatingon Roads on Jan. 1, 1998, the standard has played a very active role in strengthening the operatingsafety management of motor vehicles, improving the operating safety level of motor vehicles, and insafeguarding road traffic safety, etc. However, along with the rapid and sustainable growth of ournational economy, the number of motor vehicles has increased rapidly, especially privately-ownedautomobiles, so that the incidence of road traffic accidents rises yearly and the road trafficsafety situation is becoming increasingly serious. Therefore, the General Administration of QualitySupervision, Inspection and Quarantine of the People's Republic of China (AQSIQ) and theStandardization Administration of China (SAC) have issued the revised standard GB725 8-2004 SafetySpecifications for Power Driven Vehicles Operating on Roads, which will be put into effect onOctober 1, 2004. The timely revision of this standard is very necessary for upgrading the safety andtechnical requirements for motor vehicles in China.

Mathematical Models of Tire-Longitudinal Road Adhesion and Their Use in the Study of Road Vehicle Dynamics

Mathematical models of tire-longitudinal road adhesion for use in the study of road vehicle dynamics are set up so as to express the relations of longitudinal adhesion coefficients with the slip ratio. They perfect the Pacejka's models in practical use by taking into account the influences of all essential parameters such as road surface condition. vehicle velocity. slip angle. vertical load and slip ratio on the longitudinal adhesion coefficients. The new models are more comprehensive more concise. simpler and more convenient in application in all kinds of simulations of car dynamics in various sorts of braking modes.

Approach to estimation of vehicle-road longitudinal friction coefficient

According to the road adaptive requirements for the vehicle longitudinal safety assistant system an estimation method of the road longitudinal friction coefficient is proposed.The method can simultaneously be applied to both the high and the low slip ratio conditions. Based on the simplified magic formula tire model the road longitudinal friction coefficient is preliminarily estimated by the recursive least squares method.The estimated friction coefficient and the tires model parameters are considered as extended states. The extended Kalman filter algorithm is employed to filter out the noise and adaptively adjust the tire model parameters. Then the final road longitudinal friction coefficient is accurately and robustly estimated. The Carsim simulation results show that the proposed method is better than the conventional algorithm. The road longitudinal friction coefficient can be quickly and accurately estimated under both the high and the low slip ratio conditions.The error is less than 0.1 and the response time is less than 2 s which meets the requirements of the vehicle longitudinal safety assistant system.

Mathematical Models of Tire-Lateral Road Adhesion for Use in Road Vehicle Dynamics Studies

Mathematical models of tire-lateral mad adhesion for use in mad vehicle dynamics studies are set up to express the relations of adhesion coefficients with slip ratio in lateral direction.The models of tire-lateral mad adhesion revolutionize the Pacejka's model in concept and therefore make it possible for applications in vehicle dynamics studies by the expression of lateral adhesion coefficient as a function of wheel slip ratio,instead of the wheel slip angle,taking into account in the mean time the influences of mad surface condition, vehicle velocity,vertical load,tire slip angle,and wheel camber angle.

Dual Extended Kalman Filter for Combined Estimation of Vehicle State and Road Friction

Vehicle state and tire-road adhesion are of great use and importance to vehicle active safety control systems. However, it is always not easy to obtain the information with high accuracy and low expense. Recently, many estimation methods have been put forward to solve such problems, in which Kalman filter becomes one of the most popular techniques. Nevertheless, the use of complicated model always leads to poor real-time estimation while the role of road friction coefficient is often ignored. For the purpose of enhancing the real time performance of the algorithm and pursuing precise estimation of vehicle states, a model-based estimator is proposed to conduct combined estimation of vehicle states and road friction coefficients. The estimator is designed based on a three-DOF vehicle model coupled with the Highway Safety Research Institute（HSRI） tire model; the dual extended Kalman filter （DEKF） technique is employed, which can be regarded as two extended Kalman filters operating and communicating simultaneously. Effectiveness of the estimation is firstly examined by comparing the outputs of the estimator with the responses of the vehicle model in CarSim under three typical road adhesion conditions（high-friction, low-friction, and joint-friction）. On this basis, driving simulator experiments are carried out to further investigate the practical application of the estimator. Numerical results from CarSim and driving simulator both demonstrate that the estimator designed is capable of estimating the vehicle states and road friction coefficient with reasonable accuracy. The DEKF-based estimator proposed provides the essential information for the vehicle active control system with low expense and decent precision, and offers the possibility of real car application in future.

Synthetical Efficiency-based Optimization for the Power Distribution of Power-split Hybrid Electric Vehicles

Now the optimization strategies for power distribution are researched widely, and most of them are aiming to the optimal fuel economy and the driving cycle must be preknown. Thus if the actual driving condition deviates from the scheduled driving cycle, the effect of optimal results will be declined greatly. Therefore, the instantaneous optimization strategy carried out on-line is studied in this paper. The power split path and the transmission efficiency are analyzed based on a special power-split scheme and the efficiency models of the power transmitting components are established. The synthetical efficiency optimization model is established for enhancing the transmission efficiency and the fuel economy. The identification of the synthetical efficiency as the optimization objective and the constrain group are discussed emphatically. The optimization is calculated by the adaptive simulated annealing （ASA） algorithm and realized on-line by the radial basis function （RBF）-based similar models. The optimization for power distribution of the hybrid vehicle in an actual driving condition is carried out and the road test results are presented. The test results indicate that the synthetical efficiency optimization method can enhance the transmission efficiency and the fuel economy of the power-split hybrid electric vehicle （HEV） observably. Compared to the rules-based strategy the optimization strategy is optimal and achieves the approximate global optimization solution for the power distribution. The synthetical efficiency optimization solved by ASA algorithm can give attentions to both optimization quality and calculation efficiency, thus it has good application foreground for the power distribution of power-split HEV.

Torque Distribution of Electric Vehicle with Four In-Wheel Motors Based on Road Adhesion Margin

With the worsening of energy crisis and environmental pollution,electric vehicles with four in?wheel motors have been paid more and more attention. The main research subject is how to reasonably distribute the driving torque of each wheel. Considering the longitudinal motion,lateral motion,yaw movement and rotation of the four wheels,the tire model and the seven DOF dynamic model of the vehicle are established in this paper. Then,the torque distribution method is proposed based on road adhesion margin,which can be divided into anti ? slip control layer and torque distribution layer. The anti?slip control layer is built based on sliding mode variable structure control,whose main function is to avoid the excessive slip of wheels caused by road conditions. The torque distribution layer is responsible for selecting the torque distribution method based on road adhesion margin. The simulation results show that the proposed torque distribution method can ensure the vehicle quickly adapt to current road adhesion conditions,and improve the handling stability and dynamic performance of the vehicle in the driving process.

Dynamic Characteristics of Tracked Vehicle Power Train Considering Road Random Torsional Excitation

The road random torsional excitation is one type of torque rooted from the road roughness and vehicle drive system. This paper aims to study how the road random torsional excitation affects the dynamic characteristics of vehicle power train. The method of simulating the random torsional excitation of tracked vehicle is explored at first. Secondly,the road random torsional excitations under different road roughness,vehicle speeds and pre-tensions are obtained. Thirdly,the dynamic analysis model of tracked vehicle power train is constructed with the consideration of the road random torsional excitation. Eventually,the influences of this excitation on output torque,bearing support force,vibration acceleration and dynamic shear stress of transmission shafts are intensively studied.The research conclusions are helpful to correct and refine the present virtual prototype of tracked vehicle power train.

A Shifting Strategy for Electric Commercial Vehicles Considering Mass and Gradient Estimation

The extended Kalman filter (EKF) algorithm and acceleration sensor measurements were used to identify vehiclemass and road gradient in the work. Four different states of fixed mass, variable mass, fixed slope and variableslope were set to simulate real-time working conditions, respectively. A comprehensive electric commercial vehicleshifting strategy was formulated according to the identification results. The co-simulation results showed that,compared with the recursive least square (RLS) algorithm, the proposed algorithm could identify the real-timevehicle mass and road gradient quickly and accurately. The comprehensive shifting strategy formulated had thefollowing advantages, e.g., avoiding frequent shifting of vehicles up the hill, making full use ofmotor braking downthe hill, and improving the overall performance of vehicles.