Road runoffs were sampled from five highways and five urban roads located in the New Juaben Municipality during the late storm events in the month of November 2014 and the early storm events in January 2015. A variety...Road runoffs were sampled from five highways and five urban roads located in the New Juaben Municipality during the late storm events in the month of November 2014 and the early storm events in January 2015. A variety of water quality parameters such as, pH, temperature, turbidity, electrical conductivity (EC), total suspended solids (TSS), total dissolved solids (TDS), aqueous concentrations of Chloride (Cl<sup>-</sup>), Phosphate (), Nitrate () and Sulphate () ions as well as the total concentrations of some selected heavy metals (Fe, Cu, Zn, Pb, Cd, Ni and Cr) were analysed for both periods. Although the results for the studied parameters, particularly the heavy metals varied for both sampling periods, the general trend indicated an increase in accumulation from November 2014 to January 2015. This was attributed to vehicular deposition as well as other natural and anthropogenic depositions on the road surfaces during the antecedent dry weather period between the two sampling months. The highest increase in pollutant loadings was associated with the heavy metals and some physico-chemical parameters such as TSS, TDS, EC and turbidity. Generally, EC, TDS, TSS and turbidity were above the permissible limits of the Environmental Protection Agency (EPA) of Ghana for both sampling periods. However, almost all the mean concentrations of heavy metals recorded for both road runoffs and the control samples were within the permissible limits of the Ghana EPA with some few exceptions.展开更多
Road prisms, such as cutslopes, fillslopes and road surfaces, can be important contributors of sediment to streams in forested watersheds. In this study rainfall simulations were carried out on cutslopes, fillslopes, ...Road prisms, such as cutslopes, fillslopes and road surfaces, can be important contributors of sediment to streams in forested watersheds. In this study rainfall simulations were carried out on cutslopes, fillslopes, road surfaces and forest grounds in hardwood forests of Lolet and Lat Talar, Iran. Water at intensity of 32.4 mm·h-1 was sprayed from a nozzle onto a square area of 0.48 m2. Runoff was collected by water gauge every 4 min and then runoff and sediment parameters were measured in each plot. Results indicated that on road surfaces, the runoff coefficient was 63.28%. On the cutslopes and fillslopes, the runoff coefficients were 35.14% and 10.23%, respectively. On the forest ground as a control, the runoff coefficient was 5.90%. Runoff volume was 2.73 mL·s^-1 on the road surfaces and 1.52 mL·s^-1 on cutslopes. On fillslopes the runoff volume was 0.44 mL·s^-1 and on the forest ground 0.25 mL·s^-1 The greatest rate of soil loss was found on the cutslope （280.79 g·m-2·h-1）. The total soil loss from the cutslopes was two times higher than that from the road surfaces and six times higher than that from the fillslopes. We conclude that cutslopes can be considered the main source of sediments in our study sites, but the function of road surface as a source of runoff generation is more important.展开更多
文摘Road runoffs were sampled from five highways and five urban roads located in the New Juaben Municipality during the late storm events in the month of November 2014 and the early storm events in January 2015. A variety of water quality parameters such as, pH, temperature, turbidity, electrical conductivity (EC), total suspended solids (TSS), total dissolved solids (TDS), aqueous concentrations of Chloride (Cl<sup>-</sup>), Phosphate (), Nitrate () and Sulphate () ions as well as the total concentrations of some selected heavy metals (Fe, Cu, Zn, Pb, Cd, Ni and Cr) were analysed for both periods. Although the results for the studied parameters, particularly the heavy metals varied for both sampling periods, the general trend indicated an increase in accumulation from November 2014 to January 2015. This was attributed to vehicular deposition as well as other natural and anthropogenic depositions on the road surfaces during the antecedent dry weather period between the two sampling months. The highest increase in pollutant loadings was associated with the heavy metals and some physico-chemical parameters such as TSS, TDS, EC and turbidity. Generally, EC, TDS, TSS and turbidity were above the permissible limits of the Environmental Protection Agency (EPA) of Ghana for both sampling periods. However, almost all the mean concentrations of heavy metals recorded for both road runoffs and the control samples were within the permissible limits of the Ghana EPA with some few exceptions.
基金supported by a grant from the Basij Organizationfor Research, Science and Technology in Mazan-daran Province, Iran
文摘Road prisms, such as cutslopes, fillslopes and road surfaces, can be important contributors of sediment to streams in forested watersheds. In this study rainfall simulations were carried out on cutslopes, fillslopes, road surfaces and forest grounds in hardwood forests of Lolet and Lat Talar, Iran. Water at intensity of 32.4 mm·h-1 was sprayed from a nozzle onto a square area of 0.48 m2. Runoff was collected by water gauge every 4 min and then runoff and sediment parameters were measured in each plot. Results indicated that on road surfaces, the runoff coefficient was 63.28%. On the cutslopes and fillslopes, the runoff coefficients were 35.14% and 10.23%, respectively. On the forest ground as a control, the runoff coefficient was 5.90%. Runoff volume was 2.73 mL·s^-1 on the road surfaces and 1.52 mL·s^-1 on cutslopes. On fillslopes the runoff volume was 0.44 mL·s^-1 and on the forest ground 0.25 mL·s^-1 The greatest rate of soil loss was found on the cutslope （280.79 g·m-2·h-1）. The total soil loss from the cutslopes was two times higher than that from the road surfaces and six times higher than that from the fillslopes. We conclude that cutslopes can be considered the main source of sediments in our study sites, but the function of road surface as a source of runoff generation is more important.
