In the robotic community more and more hands are developed. Based on theexperience of HIT Hand and DLR Hand II, a smaller and easier manufactured dexterous robot hand withmultisen-sory function and high integration is...In the robotic community more and more hands are developed. Based on theexperience of HIT Hand and DLR Hand II, a smaller and easier manufactured dexterous robot hand withmultisen-sory function and high integration is jointly developed. The prototype of the hand issuccessfully built. It has 4 fingers in total 13-DOFs (degree of freedom). Each finger has 3-DOFsand 4 joints, the last 2 joints are mechanically coupled by means of four-bar linkage mechanism. Italso has an additional DOF to realize motion of the thumb relative to the palm. The fingertip forcecan reach up to 10 N. Full integration of mechanical body, actuation system, multisensory system andelectronics is a significant feature. DSP based control system is implemented in PCI busarchitecture and the serial communication between the hand and DSP needs only 2 lines.展开更多
Presents a novel compliant motion control for a robot hand using the Cartesian impedance approach based on fingertip force measurements. The fingertip can accurately track desired motion in free space and appear as me...Presents a novel compliant motion control for a robot hand using the Cartesian impedance approach based on fingertip force measurements. The fingertip can accurately track desired motion in free space and appear as mechanical impedance in constrained space. In the position based impedance control strategy, any switching mode in contact transition phase is not needed. The impedance parameters can be adjusted in a certain range according to various tasks. In this paper, the analysis of the finger’s kinematics and dynamics is given. Experimental results have shown the effectiveness of this control strategy.展开更多
The dynamics properties of a kind of multi-fingered robot hand is analyzed. It is pointed out that the dynamics property of this kind of multifingered robot hand in the approaching process is quite different from that...The dynamics properties of a kind of multi-fingered robot hand is analyzed. It is pointed out that the dynamics property of this kind of multifingered robot hand in the approaching process is quite different from that in the grasping process and,different control algorithm should be taken in the two process. A position-force hybrid control algorithm is proposed which is applied to the control system of the University of Science and Technology Beijing double-thumb robot hand successfully.展开更多
Based on flexible pneumatic actuator(FPA),bending joint and side-sway joint,a new kind of pneumatic dexterous robot finger was developed.The finger is equipped with one five-component force sensor and four contactless...Based on flexible pneumatic actuator(FPA),bending joint and side-sway joint,a new kind of pneumatic dexterous robot finger was developed.The finger is equipped with one five-component force sensor and four contactless magnetic rotary encoders.Mechanical parts and FPAs are integrated,which reduces the overall size of the finger.Driven by FPA directly,the joint output torque is more accurate and the friction and vibration can be effectively reduced.An improved adaptive genetic algorithm(IAGA) was adopted to solve the inverse kinematics problem of the redundant finger.The statics of the finger was analyzed and the relation between fingertip force and joint torque was built.Finally,the finger force/position control principle was introduced.Tracking experiments of fingertip force/position were carried out.The experimental results show that the fingertip position tracking error is within ±1 mm and the fingertip force tracking error is within ±0.4 N.It is also concluded from the theoretical and experimental results that the finger can be controlled and it has a good application prospect.展开更多
At present,albeit the dexterous hand prostheses of multiple degrees of freedom(DOFs)have become prosperous on the market,the user’s demand on intuitively operating these devices have not been well addressed so that t...At present,albeit the dexterous hand prostheses of multiple degrees of freedom(DOFs)have become prosperous on the market,the user’s demand on intuitively operating these devices have not been well addressed so that their acceptance rate is relatively low.The unintuitive control method and inadequate sensory feedback are frequently cited as the two barriers to the successful application of these dexterous products.Recently,driven by the wave of artificial intelligence(AI),a series of shared control methods have emerged,in which"bodily function"(myoelectric control)and"artificial intelligence"(local autonomy,computer vision,etc.)are tightly integrated,and provided a new conceptual solution for the intuitive operation of dexterous prostheses.In this paper,the background and development trends of this type of methods are described in detail,and the potential development directions and the key technologies that need breakthroughs are indicated.In practice,we instantiate this shared control strategy by proposing a new method combining simultaneous myoelectric control,multi-finger grasp autonomy,and augmented reality(AR)feedback together.This method"divides"the human sophisticated reach-and-grasp task into several subtasks,and then"conquers"them by using different strategies from either human or machine perspective.It is highly expected that the shared control methods with hybrid human-machine intelligence could address the control problem of dexterous prostheses.展开更多
为了对连杆空间力矩传感器进行动态补偿,提出了适用于求取串联机器人任意连杆中任意一点处所受的内力和内力矩的算法.该算法采用连杆假想截断原理利用牛顿-欧拉方程推导而出.推导过程综合考虑了串联机器人是否处于静态以及末端是否受外...为了对连杆空间力矩传感器进行动态补偿,提出了适用于求取串联机器人任意连杆中任意一点处所受的内力和内力矩的算法.该算法采用连杆假想截断原理利用牛顿-欧拉方程推导而出.推导过程综合考虑了串联机器人是否处于静态以及末端是否受外力作用的情况,以及串联机器人的关节是否是回转关节的情况.然后利用该算法计算动态补偿值,构建了基于连杆力矩传感器动态补偿的笛卡儿阻抗控制器.最后在HIT/DLR Hand II五指灵巧手上进行了实验验证.实验结果一方面验证了该算法的有效性,另一方面也验证了本文所构建的笛卡儿阻抗控制器的有效性.展开更多
文摘In the robotic community more and more hands are developed. Based on theexperience of HIT Hand and DLR Hand II, a smaller and easier manufactured dexterous robot hand withmultisen-sory function and high integration is jointly developed. The prototype of the hand issuccessfully built. It has 4 fingers in total 13-DOFs (degree of freedom). Each finger has 3-DOFsand 4 joints, the last 2 joints are mechanically coupled by means of four-bar linkage mechanism. Italso has an additional DOF to realize motion of the thumb relative to the palm. The fingertip forcecan reach up to 10 N. Full integration of mechanical body, actuation system, multisensory system andelectronics is a significant feature. DSP based control system is implemented in PCI busarchitecture and the serial communication between the hand and DSP needs only 2 lines.
文摘Presents a novel compliant motion control for a robot hand using the Cartesian impedance approach based on fingertip force measurements. The fingertip can accurately track desired motion in free space and appear as mechanical impedance in constrained space. In the position based impedance control strategy, any switching mode in contact transition phase is not needed. The impedance parameters can be adjusted in a certain range according to various tasks. In this paper, the analysis of the finger’s kinematics and dynamics is given. Experimental results have shown the effectiveness of this control strategy.
文摘The dynamics properties of a kind of multi-fingered robot hand is analyzed. It is pointed out that the dynamics property of this kind of multifingered robot hand in the approaching process is quite different from that in the grasping process and,different control algorithm should be taken in the two process. A position-force hybrid control algorithm is proposed which is applied to the control system of the University of Science and Technology Beijing double-thumb robot hand successfully.
基金Project(2009AA04Z209) supported by the National High Technology Research and Development Program of ChinaProject(R1090674) supported by the Natural Science Foundation of Zhejiang Province,ChinaProject(51075363) supported by the National Natural Science Foundation of China
文摘Based on flexible pneumatic actuator(FPA),bending joint and side-sway joint,a new kind of pneumatic dexterous robot finger was developed.The finger is equipped with one five-component force sensor and four contactless magnetic rotary encoders.Mechanical parts and FPAs are integrated,which reduces the overall size of the finger.Driven by FPA directly,the joint output torque is more accurate and the friction and vibration can be effectively reduced.An improved adaptive genetic algorithm(IAGA) was adopted to solve the inverse kinematics problem of the redundant finger.The statics of the finger was analyzed and the relation between fingertip force and joint torque was built.Finally,the finger force/position control principle was introduced.Tracking experiments of fingertip force/position were carried out.The experimental results show that the fingertip position tracking error is within ±1 mm and the fingertip force tracking error is within ±0.4 N.It is also concluded from the theoretical and experimental results that the finger can be controlled and it has a good application prospect.
基金supported by the National Key R&D Program of China(Grant No.2018YFB1307201)the National Natural Science Foundation of China(Grant No.51675123)the Postdoctoral Scientific Research Development Fund(Grant No.LBH-W18058)。
文摘At present,albeit the dexterous hand prostheses of multiple degrees of freedom(DOFs)have become prosperous on the market,the user’s demand on intuitively operating these devices have not been well addressed so that their acceptance rate is relatively low.The unintuitive control method and inadequate sensory feedback are frequently cited as the two barriers to the successful application of these dexterous products.Recently,driven by the wave of artificial intelligence(AI),a series of shared control methods have emerged,in which"bodily function"(myoelectric control)and"artificial intelligence"(local autonomy,computer vision,etc.)are tightly integrated,and provided a new conceptual solution for the intuitive operation of dexterous prostheses.In this paper,the background and development trends of this type of methods are described in detail,and the potential development directions and the key technologies that need breakthroughs are indicated.In practice,we instantiate this shared control strategy by proposing a new method combining simultaneous myoelectric control,multi-finger grasp autonomy,and augmented reality(AR)feedback together.This method"divides"the human sophisticated reach-and-grasp task into several subtasks,and then"conquers"them by using different strategies from either human or machine perspective.It is highly expected that the shared control methods with hybrid human-machine intelligence could address the control problem of dexterous prostheses.
文摘为了对连杆空间力矩传感器进行动态补偿,提出了适用于求取串联机器人任意连杆中任意一点处所受的内力和内力矩的算法.该算法采用连杆假想截断原理利用牛顿-欧拉方程推导而出.推导过程综合考虑了串联机器人是否处于静态以及末端是否受外力作用的情况,以及串联机器人的关节是否是回转关节的情况.然后利用该算法计算动态补偿值,构建了基于连杆力矩传感器动态补偿的笛卡儿阻抗控制器.最后在HIT/DLR Hand II五指灵巧手上进行了实验验证.实验结果一方面验证了该算法的有效性,另一方面也验证了本文所构建的笛卡儿阻抗控制器的有效性.
