This study investigated multi-response optimization of the pulse metal active gas-tungsten inert gas( PMAG-TIG) twin arc hybrid root welding process for an optimal parametric combination to yield favorable back bead g...This study investigated multi-response optimization of the pulse metal active gas-tungsten inert gas( PMAG-TIG) twin arc hybrid root welding process for an optimal parametric combination to yield favorable back bead geometry of welded joints using grey relational analysis and Taguchi method.Eighteen experimental runs based on an orthogonal array following the Taguchi method were performed to derive objective functions to be optimized within the experimental domain.The objective functions were selected in relation to parameters of PMAG-TIG twin arc root welding back bead geometry: back bead width to root reinforcement ratio and deposited metal height.The Taguchi approach was followed by grey relational analysis to solve the multi-response optimization problem.The significance of factors on overall quality characteristics of the weld joint was also evaluated quantitatively using analysis of variance.Optimal results were verified through additional experiments,and showed to feasibility of applying grey relation analysis in combination with Taguchi technique for continuous improvement of product quality in the manufacturing industry.展开更多
Metal active gas （ MAG） welding has been carried out on microalloy controlled rolling steel （S355J2W） by two kinds of welding wires with different Ti content. The mechanical tests have been carried out on the weld...Metal active gas （ MAG） welding has been carried out on microalloy controlled rolling steel （S355J2W） by two kinds of welding wires with different Ti content. The mechanical tests have been carried out on the welded joint. The optical microscope and scanning electron microscope （SEM） observations have been performed to investigate the effect of microalloy element Ti on the microstructure of weld metal and impact fracture, respectively. The microstrueture of the MAG multipass weld metal includes the columnar grain zone （CGZ） consisting of primary ferrite （ PF）, ferrite with second phase （FS） and acicularferrite （AF）, and the fine grain zone （FGZ） consisting of polygonal ferrite due to the heat effect of subsequent welding pass. It has been found that the small amount of Ti can significantly increase the impact energy of the weld metal at low temperature and weakly affect tensile strength of welded joint. By adding small amount of Ti, the inclusions have changed from Mn-Si-O inclusions to Ti-bearing inclusions, which causes the Mn-depleted zones（MDZs） much larger and is beneficial to the impact energy by promoting the AF formation, refining the PF and pinning the austenite grain boundary during the subsequent transformation process.展开更多
Cold Metal Transfer technology has revolutionized the welding of dissimilar metals and thicker materials by producing improved weld bead aesthetics with controlled metal deposition and low heat-input. In this study, t...Cold Metal Transfer technology has revolutionized the welding of dissimilar metals and thicker materials by producing improved weld bead aesthetics with controlled metal deposition and low heat-input. In this study, the process, weld combinations, laser-CMT hybrid welding and applications of CMT welding are critically reviewed. Microstructure and other weld characteristics have been discussed at length for various base metal combinations. Particularly, the welding of aluminium and steel with better results has been possible with CMT Welding. The results reviewed in this article indicate that the CMT-Laser hybrid welding is more preferable to Laser or Laser hybrid welding. CMT welding has found applications in automobile industries, defence sectors and power plants as a method of additive manufacturing.展开更多
Advanced A-TIG method was conducted to increase the weld penetration and compared with the conventional TIG welding process.A two-pipeline setup was designed to apply Ar ＋ CO_2 mixed gas as the outer layer,while pure...Advanced A-TIG method was conducted to increase the weld penetration and compared with the conventional TIG welding process.A two-pipeline setup was designed to apply Ar ＋ CO_2 mixed gas as the outer layer,while pure argon was applied as the inner layer to prevent any consumption of the tungsten electrode.The results indicate that the presence of active gas in the molten pool led to the change in the temperature coefficient of surface tension so that the Marangoni convection turns inward and forms a deep weld zone.The increase in gas flow rate causes a decrease in the weld efficiency which is attributed to the increase in oxygen content in the weld pool and the formation o f a thicker oxide layer on the weld surface.Moreover,the stir and the temperature fluctuation,led by double shielding gas,create more homogeneous nucleation sites in the molten pool so that a fine grain micros true ture was obtained.展开更多
There are several advantages to the MIG(Metal Inert Gas)process,which explains its increased use in variouswelding sectors,such as automotive,marine,and construction.A variant of the MIG process,where the sameequipmen...There are several advantages to the MIG(Metal Inert Gas)process,which explains its increased use in variouswelding sectors,such as automotive,marine,and construction.A variant of the MIG process,where the sameequipment is employed except for the deposition of a thin layer of flux before the welding operation,is the AMIG(Activated Metal Inert Gas)technique.This study focuses on investigating the impact of physical properties ofindividual metallic oxide fluxes for 304L stainless steel welding joint morphology and to what extent it can helpdetermine a relationship among weld depth penetration,the aspect ratio,and the input physical properties ofthe oxides.Five types of oxides,TiO_(2),SiO_(2),Fe_(2)O_(3),Cr_(2)O_(3),and Mn_(2)O_(3),are tested on butt joint design withoutpreparation of the edges.A robust algorithm based on the particle swarm optimization(PSO)technique is appliedto optimally tune the models’parameters,such as the quadratic error between the actual outputs(depth and aspectratio),and the error estimated by the models’outputs is minimized.The results showed that the proposed PSOmodel is first and foremost robust against uncertainties in measurement devices and modeling errors,and second,that it is capable of accurately representing and quantifying the weld depth penetration and the weld aspect ratioto the oxides’thermal properties.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11375038)Science Fund for Creative Research Groups of NSFC(Grant No.51621064)
文摘This study investigated multi-response optimization of the pulse metal active gas-tungsten inert gas( PMAG-TIG) twin arc hybrid root welding process for an optimal parametric combination to yield favorable back bead geometry of welded joints using grey relational analysis and Taguchi method.Eighteen experimental runs based on an orthogonal array following the Taguchi method were performed to derive objective functions to be optimized within the experimental domain.The objective functions were selected in relation to parameters of PMAG-TIG twin arc root welding back bead geometry: back bead width to root reinforcement ratio and deposited metal height.The Taguchi approach was followed by grey relational analysis to solve the multi-response optimization problem.The significance of factors on overall quality characteristics of the weld joint was also evaluated quantitatively using analysis of variance.Optimal results were verified through additional experiments,and showed to feasibility of applying grey relation analysis in combination with Taguchi technique for continuous improvement of product quality in the manufacturing industry.
文摘Metal active gas （ MAG） welding has been carried out on microalloy controlled rolling steel （S355J2W） by two kinds of welding wires with different Ti content. The mechanical tests have been carried out on the welded joint. The optical microscope and scanning electron microscope （SEM） observations have been performed to investigate the effect of microalloy element Ti on the microstructure of weld metal and impact fracture, respectively. The microstrueture of the MAG multipass weld metal includes the columnar grain zone （CGZ） consisting of primary ferrite （ PF）, ferrite with second phase （FS） and acicularferrite （AF）, and the fine grain zone （FGZ） consisting of polygonal ferrite due to the heat effect of subsequent welding pass. It has been found that the small amount of Ti can significantly increase the impact energy of the weld metal at low temperature and weakly affect tensile strength of welded joint. By adding small amount of Ti, the inclusions have changed from Mn-Si-O inclusions to Ti-bearing inclusions, which causes the Mn-depleted zones（MDZs） much larger and is beneficial to the impact energy by promoting the AF formation, refining the PF and pinning the austenite grain boundary during the subsequent transformation process.
文摘Cold Metal Transfer technology has revolutionized the welding of dissimilar metals and thicker materials by producing improved weld bead aesthetics with controlled metal deposition and low heat-input. In this study, the process, weld combinations, laser-CMT hybrid welding and applications of CMT welding are critically reviewed. Microstructure and other weld characteristics have been discussed at length for various base metal combinations. Particularly, the welding of aluminium and steel with better results has been possible with CMT Welding. The results reviewed in this article indicate that the CMT-Laser hybrid welding is more preferable to Laser or Laser hybrid welding. CMT welding has found applications in automobile industries, defence sectors and power plants as a method of additive manufacturing.
文摘Advanced A-TIG method was conducted to increase the weld penetration and compared with the conventional TIG welding process.A two-pipeline setup was designed to apply Ar ＋ CO_2 mixed gas as the outer layer,while pure argon was applied as the inner layer to prevent any consumption of the tungsten electrode.The results indicate that the presence of active gas in the molten pool led to the change in the temperature coefficient of surface tension so that the Marangoni convection turns inward and forms a deep weld zone.The increase in gas flow rate causes a decrease in the weld efficiency which is attributed to the increase in oxygen content in the weld pool and the formation o f a thicker oxide layer on the weld surface.Moreover,the stir and the temperature fluctuation,led by double shielding gas,create more homogeneous nucleation sites in the molten pool so that a fine grain micros true ture was obtained.
文摘There are several advantages to the MIG(Metal Inert Gas)process,which explains its increased use in variouswelding sectors,such as automotive,marine,and construction.A variant of the MIG process,where the sameequipment is employed except for the deposition of a thin layer of flux before the welding operation,is the AMIG(Activated Metal Inert Gas)technique.This study focuses on investigating the impact of physical properties ofindividual metallic oxide fluxes for 304L stainless steel welding joint morphology and to what extent it can helpdetermine a relationship among weld depth penetration,the aspect ratio,and the input physical properties ofthe oxides.Five types of oxides,TiO_(2),SiO_(2),Fe_(2)O_(3),Cr_(2)O_(3),and Mn_(2)O_(3),are tested on butt joint design withoutpreparation of the edges.A robust algorithm based on the particle swarm optimization(PSO)technique is appliedto optimally tune the models’parameters,such as the quadratic error between the actual outputs(depth and aspectratio),and the error estimated by the models’outputs is minimized.The results showed that the proposed PSOmodel is first and foremost robust against uncertainties in measurement devices and modeling errors,and second,that it is capable of accurately representing and quantifying the weld depth penetration and the weld aspect ratioto the oxides’thermal properties.
